Use & care guide

7, Select cycle
, . normal cold
hea eets
dut
power 010 rS /
owels
whr f / I lactive
'esA\\ ))/p"
allerfe apid
ash
sani cate
wit wash
rinse/drain soak clean washer
&spin with a_lllStl
Turn cycle knob to choose your wash
cycle. Estimated Time Remaining
will light up with a cycle time. You may
notice time adjusting during the cycle.
This is normal.
If you do not want to begin a cycle
immediately, you may choose DELAY
START option.
estimated time remaining
To choose a delay time:
1. Press POWER/CANCEL
2. Select the desired Cycle, Modifiers, and Options. Delay Start
is not valid for Rinse/Drain & Spin cycle.
3. Press + (plus) DELAY START. 1H (one hour) will be displayed
in the time display window. The indicator light for Delay will
glow.
4. For a longer delay time, press DELAY START + (plus). For a
shorter delay time, press DELAY START - (minus). The Start
Time will increase or decrease by 1-hour steps.
5. Press START/PAUSE. The countdown in hours and minutes
to the wash cycle will show in the time display window and
the indicator light will begin to flash.
NOTE: The Start/Pause indicator light will not flash when
Delay Start is chosen. You must press START/PAUSE
to initiate a countdown for the cycle to begin. The cycle
selections and modifiers are lit during the Delay Start time.
To cancel delaying a cycle:
Press POWER/CANCEL once to cancel Delay Start or press
START/PAUSE to cancel the countdown and start the cycle.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
8, Select cycle modifiers
modifiers
ll eco
cold
| cold !1 cool I warm II hot
auto temperature control
II no II low II medium U max
spin extract
II! light MImedium II heavy III extra
heavy
Once you select a cycle, the default settings for that cycle will
be lit. Press the Modifier buttons to change the Wash Temp,
Spin Speed, and Soil Level, if desired. Not all settings are
available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Warm
Some cold water will be added,
so this may be cooler than what
your previous washer provided.
Bright colors
Moderate to light soils
Cool
Warm water is added to assist Colors that bleed
in soil removal and to help or fade
dissolve detergents. Light soils
Cold
Warm water may be added Dark colors that
to assist in soil removal and bleed or fade
to help dissolve detergents. Light soils
Eco Cold
This is the temperature from Dark colors that
your faucet, bleed or fade
Light soils
11