user manual

10
Maintenance instructions:
■ Clean lint screen after each cycle.
■ Removing accumulated lint (disconnect dryer from electricity
a
nd gas supplies before starting this task):
• From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done
by a qualified person.
• F
rom the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
MAINTENANCE INSTRUCTIONS
I
f dryer does not operate, check the following:
■ Electric supply is connected.
■ Circuit breaker is not tripped or fuse is not blown.
■ Door is closed. Listen closely to hear door switches activate.
■ Selected cycle button has been pressed firmly and display
s
hows cycle time.
■ Check that gas supply shutoff valves are set in open position.
If you need assistance:
Contact your authorized Maytag Commercial Laundry distributor
or visit: www.MaytagCommercialLaundry.com. When you call,
you will need the dryer model number and serial number.
Both numbers can be found on the serial-rating plate located
on your appliance.
220-240V~50Hz 1ph 3A max. IP24 Clothes capacity: 9.0 kg max. Sound pressure level, Lpa: 58 dBA
(uncertainty, Kpa: +/–10 dBA) Total mass: 68 kg max.
European Country: CH, CZ, CY, ES, GB, GR, HR,
IE, IT, PT, SI, SK, TR
0.562703 m
3
/hr
30 mbar
37 mbar 30 mbar
28-30 mbar
N/A N/A
N/A
N/A
N/A
7.4 mbar 7.4 mbar
20 mbar
20 mbar
25 mbar
20 mbar
0.562703 m
3
/hr
II
2H3+
II
2H3B/P
II
2H3+
I
2E+
II
2H3B/P
CY, CZ, DK, EE, FI, GR, HU, IT,
NO, RO, SE, SK, TR
CY, CZ, DK, EE, FI, GR, HU, IT,
NO, RO, SE, SK, TR
CH, CZ, CY, ES, GB, GR, HR,
IE, IT, PT, SI, SK, TR
European Gas Category:
Gas Flow Rate:
Supply Pressure (G20):
Factory Adjusted Pressure:
European Country:
European Gas Category:
Butane Supply Pressure (G30):
Adjusted Pressure:
Adjusted Pressure:
Propane Supply Pressure (G31):
Factory set for NATURAL GAS: Injector size: 2.2 mm Heat input gross: 5.9 kW
With LP Gas Conversion Kit: Injector size: 1.25 mm Heat input gross: 6.4 kW
With France/Belgium NATURAL GAS conversion kit: Injector size: 1.65 mm Heat input gross: 5.9 kW
FR, BE
European Country:
European Gas Category:
Supply Pressure (G20):
Supply Pressure (G25):
Adjusted Pressure:
NOTE: Conversion kit:From Natural Gas to LP Gas: Whirlpool Part No. W10233219.
Manufacturer: Whirlpool Corporation, 1300 Marion-Agosta Rd., Marion, OH 43302, USA.
Conversion kit:From Natural Gas to Natural Gas - France/Belgium: Whirlpool Part No. W10184947.
EU representatives: Maytag UK Ltd., 2 St. Annes Blvd., Redhill, RH1 1AX, UK
& Bauknecht Hausgeräte GmbH, D-73614 Schorndorf, Germany
TECHNICAL SPECIFICATIONS - GAS DRYER