user manual

5
R
ecessed Area and Closet Installation Instructions
This dryer may be installed in a recessed area or closet. This
dryer must not be installed behind a lockable door, a sliding door,
or a door with a hinge on the opposite side to that of the dryer.
The installation spacing is in millimeters and is the minimum allowable.
Additional spacing should be considered for ease of installation,
servicing, and compliance with local codes and ordinances.
If installed in a closet with a door, the minimum unobstructed air
opening in the top and bottom is required. Louvered doors with
equivalent air openings are acceptable.
The dryer must be exhausted outdoors.
No other fuel-burning appliance may be installed in the same
closet as the dryer.
Minimum Installation Clearances
Product Dimensions 686 mm (27") dryer
76 mm (3")
155cm
2
*
(24 in.
2
)
310cm
2
*
(48 in.
2
)
76 mm (3")
Recessed front view
Closet side view
Additional clearances for wall, door, and floor moldings may be required or if
external exhaust elbow is used.
closet
door
*Opening is the minimum
for a closet door. Louvered
doors with equivalent air
openings are acceptable.
381 mm
(15")
0 mm
(0")
0 mm
(0")
356 mm
(14") max
25 mm (1")
0 mm
(0")
C
loset
d
oor
Front
view
686 mm
(27")
965 mm
(38")
25 mm
(1")
159 mm
(6
1
/4")
715 mm
(28
1
/8")
89 mm
(3
1
/2")
358 mm
(14")
32 mm
(1
1
/4")
152 mm
(5
7
/8")
E
LECTRIC
BACK VIEW
FRONT VIEW
SIDE VIEW
G
AS
Electrical Requirements Gas Dryer
Important: Observe all governing codes and ordinances.
You will need an earthed electrical outlet located within 610 mm
(2 feet) of either side of the dryer.