user manual

22
Plug cord into live electrical outlet.
Check fuse or reset circuit breaker.
Press the
START button again if the door is opened during the cycle.
Check fuse or reset circuit breaker.
Select a heat setting, not AIR FLUFF.
On a gas dryer, check that the gas supply is on.
Clean the lint filter and exhaust duct.
Check all of the above, plus...
Be sure the exhaust hood at the outside of the home can open and close freely.
Use 4” rigid metal exhaust duct.
Do not overload. One wash load = One dryer load.
Sort heavy items from lightweight items.
Check that the washer is draining properly to extract adequate water from the load.
Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly.
Be sure the Super Stack
T
M
is leveled properly as outlined in the Installation
Instructions.
Be sure the rubber feet are installed on the leveling legs.
Check that the leveling leg lock nuts are tightened.
This is normal operation for an IntelliDry
®
cycle, especially at the beginning of the
cycle
.
Once the load begins to dry, the control knob will start to advance.The rate
of advancement will be slow at the beginning of the cycle because there is more
moisture in the load. As the load becomes more dry, the control knob will advance
mor
e quickl
y
.
Seams, pockets and other similar heavy areas may not be completely dry when the
r
est of the load has r
eached the selected dr
yness le
v
el.
This is normal.
Select the
MORE DRY setting if desired.
If one heavy item is dried with a lightweight load, such as one towel with sheets, it is
possible that the heavy item will not be completely dry when the rest of the load
has r
eached the selected dr
yness level. Sort heavy items from lightweight items for
best drying results.
Household odors such as from painting, varnishing, strong cleaners, etc. may enter
the dryer with the surrounding room air. This is normal as the dryer draws the air
fr
om the r
oom,
heats it,
pulls it thr
ough the tumbler and exhausts it to the outside
.
When these odors are present in the air, ventilate the room completely before using
the dryer.
Doesn’t Run
Control Knob
Advances
Slowly
Is Noisy
Doesn’t Dry
Doesn’t Heat
Check these points if your clothes dryer...
TT
ROUBLESHOOTING - DRYER
F
or fur
ther assistance
, call Maytag Customer Assistance toll-free at 1-800-688-9900 USA or 1-800-688-2002 Canada.
U
.S.
customers using
TTY f
or deaf,
hearing impair
ed or speech impair
ed, call 1-800-688-2080.
Dries Unevenly
Has an Odor