Owner`s manual

Upper Rack
The upper rack of your dishwasher is designed
_itb flexibility, in mind. Glasses, cups, small
plates, bowls, pans, etc. can be loaded in many
different positions to suit your needs.
The hinged shelf car_be used to stack two levels
of cups, juice glasses, and other short items.
Load small diameter items under shelf so water
will reach upper tier. When the shelf is folded
up, this area can be used for taller glasses,
stemware, etc.
The rack is designed so dishes can be centered
behind a single fine and held in plac_ by the
ra&_ support wires. Dishes can also be !oaded at
an angle to maximize space.
When loading glassware, leave a small space
between each piece so they do not touch each
other during the wash cycle. Do not place
glasses over the tines.
The upper rack may be removed if desired.
Push inward on the front of the rack rail ends to
unsnap. Remove rail ends and pull out rack.
To replace rack: reinsert rack, place rail ends in
position and snap fronts into place by pushing
outward.
PAGE 4