Dryer Installation Manual

21
REVERSE DOOR SWING
® TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
Place towel on dryer
1.
Place towel on top of dryer to avoid damaging the surface.
Remove screws attaching hinges to door.
Remove screws from hinges
4.
Lift door until top screws in dryer cabinet are in large part of
hinge slot. Pull door forward off screws. Set door (handle side
up) on top of dryer. Remove top screws from dryer cabinet.
Lift door off top screws
3.
Open dryer door. Remove bottom screws from dryer cabinet
side of hinges. Loosen (do not remove) top screws from dryer
cabinet side of hinges.
Remove bottom screws
2.
Flip door over
5.
Flip door over so handle side is down.