User`s guide

Instructions for Installation (cont'd)

3. Using the tube of sealant supplied, run an ample amount 6. The standard vent kit includes a 6° diameter extension

around the oval flare of the jacket, pipe which is used when "E" dimension is over 6V2".

4. First remo e the 3 honzontaI extension from the elbow. X

Starting with the long end (with four securing holes), _] --_ _ ,__

place the 6" diameter vent elbow over the 3" diameter ,,

elbow. Bend the round end "oval_ to fit the flared oval end

of the jacket top.

I / I

7 If_E " dimension is less than 6VI' move to next step.

_)_ If"E" dim ensionis over6_/I', assemble the 6" diameter

extension pipe (crimped end) to the 6" diameter vent

elbow and secure using two sheet metal screws. Using the

tube of sealant supplied, run an ample amount around the

joint to insure a good seal.

5. Making sure the 6" diameter elbow is centered around the __ __

3" diameter flue, secure the 6" diameter vent pipe using

four sheet metal screws at the connection of the jacket top.

(_)-?__ _-'" 8. eSll_do;ihevent collar (to be installed later)over the 6" vent