User`s guide

Installation Instructions (cont'd)

9. Making sure the 6" diameter elbow is centered around the 11. Place the water heater at the opening in the waU, at the

3" diameter flue, secure the 6" diameter vent pipe using predetermined clearance.

two sheet metal screws at the connection of the elbow and

M . . I

6 vertical extension.

10. Slide the vent collar (to be installed later) over the 6" vent ¢ _

elbow.

12. Slide the 6" telescoping vent section apart to reveal the

___ beaas

NOTE: The 6" plpe with beads MI1 connect to the

elbow. Using the caulking supplied, fill the beads.

13. Insert the 6" telescoping vent section into the wall.

Z[IIIIEI