User`s guide

Instructionsfor Installation (cont'd)
20. Collapse the 6" vent extension pipes as shown below and 22. Now the 6" vent extension pipes can be expanded to con-
install the 3" extension by first sfipping the end with the nect at the vent elbow.
O-ring approximately 1_/," into the end of the vent cap.
Lock the other end of the 3" extension assembly to the
NOTE:studs in theelbOW.Tofacilitate of the _ [__--_r_
ease ofasserably vent cap to
the 3" pipe, a soap solution can be appfied to the O-ring
gasket.
23. Pull the vent collar from the elbow to he against the wall
and secure it using the screws provided.
V
I i
i ,
:I
24. Lock the 6" vent extension to the vent elbow by using two
21. Using a #22 drill bit, drill holes 180° apart at the connec- screws provided, placing them 180" apart.
tion point of the two 3" flue extensions. Then using 2
screws provided, lock these pipes together.
//
29