User's Manual

C
C - 9
cAMpING
Check your 12-volt distribution panel for blown fuses. It is located on the right side of
the cabinet under the front window.
The next option is to manually close the room. Under your trailer, where the room is
located, there’s a large hinged access panel attached to the underside of the trailer.
It’s rectangular and about a foot wide and six feet long. On the side opposite the
hinge, three or four stainless steel screws hold the panel closed. Opening the access
panel reveals the motor and main drive shaft extending from the motor to the two
gear driven slides.
On one end of the motor is a short lever. Swinging the lever up releases a brake that
prevents the shaft from turning when the motor is shut off. With the brake released,
it’s now possible to turn the drive shaft with a 3/4-inch wrench. The octagon stub for
emergency use of a wrench is located on the end of the drive shaft towards the back
of the trailer.
Slide out Mechanism Manufacturer:
Power Gear
1-800-334-4712