User's Manual

E
E - 10
INTERIOR
WArNINg: USE ONLY THE BATTERIES SPECIFIED. USE OF DIFFERENT
BATTERIES MAY HAVE A DETRIMENTAL EFFECT ON THE CO DETECTOR.
CLEANING YOUR DETECTOR:
To clean your detector remove it from the mounting bracket as outlined in the beginning
of this section.
You can clean the interior of your detector by using your vacuum cleaner hose and
vacuuming through the openings around the perimeter of the detector. The outside can
be wiped with a damp cloth.
AFTER CLEANING, REINSTALL YOUR DETECTOR. TEST YOUR DETECTOR BY
USING THE TEST BUTTON.
Test detector weekly for proper operation by pushing the test button until the YELLOW
L.E.D. lights and a short beep is heard (approximately three seconds). Release the
button. The detector will then test itself for proper operation. At completion of the self-
test, the alarm will sound and both L.E.D.s will light for 3/4 of a second. The detector
then resumes normal operation.
SERVICE AND WARRANTY
If after reviewing this manual you feel that your CO Detector is defective in any way,
do not tamper with the unit. Return it for servicing to: Quantum Group, Inc., 11211
Sorrento Valley Road, Suite Valley Road, Suite V. San Diego, CA 92121.
Or call us toll free [phone]
E-mail address: [e-mail]