Installation guide

What type of electrical
connection will you use?
-.Power Supply Cord:
~Follow Option.A instructions
Direct Wire:
. Follow-Option.B instructions
If using Option B, proceed to “Determine Cabinet Opening,” to
continue with the installation of your dishwasher.
Option A, Power Supply Cord:
Power Cord—Route cord
into terminal box
Route cord so that it does not touch dishwasher motor to lower
part of dishwasher tub. Pull cord through strain relief in terminal
bow.
Select UL Listed/CSA Approved twist-on wire connectors rated to
connect your power supply cord to 16-gauge dishwasher wiring.
ab
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
2 | Power Supply Cord—
Connect ground wire
Oo Ground
wire
W)
Ground
Ge
a
Washer
)
wire
CG
Cy
s@)
Ground
=, connector
Remove the green grounding screw and place through the ring
terminal of the green ground wire. Reattach and tighten the
green screw.
3 | Power Cord—Connect
remaining wires
NOTE: Do not pre-twist stranded wire. Twist on wire connector.
Gently tug on wires to be sure both are secured.
Connect wires black to black and white to white, using
UL Listed/CSA Approved twist-on wire connectors.
11