Installation guide

ElectricalShock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Form bare ground wire into a U-shaped hook. Wrap
ground wire hook clockwise around ground connector
screw and under the washer. Securely tighten ground
connector.
NOTE: Twist on UL listed or CSA approved wire
connector. Gently tug on wires to be sure both are
secured.
Connect wires black to black and white to white, using
UL listed or CSA approved twist-on wire connectors (not
included).
b Iack -_e------e_ bIack
ground Wire _ ground Connector
If needed, see website for animated representation
of this step. Visit www.maytag.com/electrical under FAQ
tab.
Tighten strain relief screws to secure cable.
Place wires inside terminal box. Insert tabs
on left side of cover. Make sure wires are tucked inside box.
Close cover ensuring wires are not pinched. Use 1/4" nut
driver and previously removed screw to secure cover.
18