Installation guide

INSTALLATION REQUIREMENTS
L—MMMMAMMAA AAAs
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
All Installations
Tools needed:
Phillips
screwdriver
Flat-blade
screwdriver
Utility knife
5As" and Va"
nut drivers. or
hex sockets
UL-listed or CSA
approved twist-on wy
wire connectors*
eX
Measuring
tape
Small
level
or-ruler
10"
adjustable
wrench
foxy]
5,
open-end
that
opens
to
Ze
h
VA"
(2.9-cm)
wren’
Hammer
oA
eo
Sand
paper
*Must be the proper size to connect your household
wiring to 16-gauge wiring in dishwasher
Other useful items you may need:
Flashlight Bath. towel
Shallow.pan
Wood block GZ
O%
Parts supplied:
2- Drain hose clamps Drain-hose 2-#10 x"
(1 ‘& and 1 & Phillips-head
screws
Make sure all these parts are included in the literature package.
& ver &
Parts needed:
¥3" Compr x 34" Hose Fitting
For part or kit, see local
retailer or call Whirlpool
Parts: 1-800-442-9991. Part
Number W10273460
Other parts you may also need:
1A" 2"
(38.1-5.0 cm)
Screw-type . Ne
clamps.(3-max)
Masking or
duct tape
NOTE: Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
“Electrical Requirements” section. It is recommended that
electrical connections be made by a licensed electrical installer.
In addition, for first-time installations
Tools needed:
Cordless drill
with 42",%"
and-1'%"-hole
saw bits
Small
tubing cutter
Wire stripper
Parts needed:
flexible braided
water. supply line
Copper tubing-@-" See “Electrical Requirements”-section
0.D.: suggested) or
For Direct Wire:
use UL listed or
CSA approved
strain relief to
fit ”"(2.2-cm)
hole
For Power.Supply
Cord:-use UL
listed power
supply cord kit
Part Number 4317824
marked for use
with dishwasher
Additional parts supplied with certain models only:
in lower-rack)
Bottom sound pad (located Moisture barrier tape
Make sure all these parts are included in the package containing
literature.