Installation guide

Check that top of door does not contact screws, brackets or
countertop. If it does, adjust leveling legs.
B | Check inner spacing
|
Nu
im =
<<
ee
soon
eee
re
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws secured and shift tub. Tighten bracket
screws.
C heck side attachment
plastic
button (Oh |
If securing with a side attachment, check that sides of door do not
rub against the screw heads. If they do, dishwasher must be
re-centered. When dishwasher is properly centered, replace
plastic buttons.
Remove towel and replace
lower dishwasher rack
Remove towel from dishwasher. Reinstall the lower dish rack.
If needed, see website for animated representation of this step.
Visit www.maytag.com/anchoring under FAQ tab.
Complete Installation
Reinstall access panel and fasteners
Insulation
(on some models)..<
Place the plastic access panel against the dishwasher leg.
2 | Check access panel edge
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.
21