Installation guide

Complete Installation
1 | Reinstall access panel and fasteners
Insulation
{on some models)
Place the plastic access panel against the dishwasher leg.
? | Check access panel edge
|
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.
Tighten fasteners
Using a flat-blade screwdriver, turn the fasteners 1% turn clockwise
to lock into place. The fasteners slot will be straight up and down
when properly locked.
°
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Power supply cord—Plug into
a grounded 3 prong outlet
Plug into a grounded 3 prong outlet. Check that power supply
cord does not touch dishwasher motor or lower part of
dishwasher tub.
Reconnect Power
[4 Reconnect power )
Reconnect electrical power.at the fuse. box:or.circuit
breaker-box.
23