Installation guide

INSTALLATION INSTRUCTIONS
°
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
| 1 | Disconnect power }
Prepare Cabinet Opening — Existing
Utilities
Check water and electrical
placement
iT
Disconnect electrical power at the fuse box or circuit
breaker box before installing: dishwasher.
[9 Shut off water supply —}
Shut off the water supply to the dishwasher. J
Do you already have utility
hookups?
Yes —Follow instructions in the “Prepare Cabinet
Opening—Existing Utilities” section.
No —Follow instructions in the “Prepare Cabinet
Opening—New. Utilities” section.
If the water line and the cable extend to the locations shown,
proceed to the “Install Drain Hose” section. If they do not reach far
enough, follow the instructions in the “Prepare Cabinet Opening —
New Utilities” section.
Prepare Cabinet Opening—Ne
Utilities
Prepare and route the electrical supply
What type of electrical
connection will you use?
-.Power-Supply Cord:
: Follow Option A instructions
Direct Wire:
Follow Option B.instructions
Option A, Power Supply Cord:
‘No existing utility hookups ~ Existing utility hookups
\
Water line
TH]
NOTE: A grounded 3 prong outlet is required inside a cabinet next
to the dishwasher cabinet opening.
1 | Power Supply Cord—Drill hole
SS .
Optional location
Preferred location
Drill a 1%" (3.8 cm) hole in cabinet side or rear.
See “Product and Cabinet Opening Dimensions” section.