Installation guide

Secure Dishwasher in Cabinet Opening

Check that dishwasher is still level front to back and side

to side in cabinet opening.

IMPORTANT: If you have solid countertops such as

corrian, granite, etc., you must use side mounting kit

(Part Number 8212560). Follow kit instructions. (Brackets

are included with kit.)

Open dishwasher door, remove lower dish rack, and

place towel over pump assembly and lower spray arm of

dishwasher. This will prohibit screws from falling into

pump area when securing dishwasher to countertop.

NOTE: Do not drop screws into bottom of dishwasher.

Locate brackets on top of dishwasher and secure

dishwasher to countertop with two, #10 x 1/2" Phillips-

head screws (included). The dishwasher must be secured

to keep it from shifting when door is opened.

Check that top of door does not contact screws,

brackets, or countertop. If it does, adjust leveling legs.

Open door and check that space between dishwasher

cabinet opening and tub is equal on both sides. If

spacing is not equal, loosen bracket screws secured

and shift tub. Tighten bracket screws.

plastic

button ---_-

If securing with a side attachment, check that sides of door

do not rub against the screw heads. If they do, dishwasher

must be re-centered. When dishwasher is properly centered,

replace plastic buttons.