Installation guide

Remove towel and replace
lower dishwasher rack
Remove towel from dishwasher. Reinstall the lower dish rack.
If needed, see website for animated representation of this step.
Visit www.maytag.com/anchoring under FAQ tab.
Insulation
(on some models) -~
Place the plastic access panel against the dishwasher leg.
2 | Check access panel edge
| ~~
=
SN
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.
20
Tighten fasteners
Using a flat-blade screwdriver, turn the fasteners % turn to lock
into place. The fasteners slot will be straight up and down when
properly locked.
fw
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Power supply cord—Plug into
a grounded 3 prong outlet
Plug into a grounded 3 prong outlet. Check that power supply
cord does not touch dishwasher motor or lower part of
dishwasher tub.