Installation guide

Usinga1/4"hexheadsocket,nutdriverorPhillipsscrewdriver,
removeterminalboxcover.Retainforlateruse.
InstallaULListed/CSAApprovedstrainrelief.Makesure
screwheadsarefacingtotheleftwhentighteningconduitnut.
Strainreliefmaybeprovidedwiththepowersupplycordkit.
D!rectwire:
: FollowOptionBinstructions
Option A, Power Supply Cord:
Route cord so that it does not touch dishwasher motor to lower
part of dishwasher tub. Pull cord through strain relief in terminal
bow.
Select UL Listed/CSA Approved twist-on wire connectors (not
included) rated to connect your household wiring to 16-gauge
dishwasher wiring.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Power Supply Cord--
Connect ground wire
©
Remove the green grounding screw and place
through the ring terminal of the green ground wire. Reattach
and tighten the green screw. 1 1