Installation Guide

Leveling

Leveling your dryer properly reduces excess noise and vibration.

1. Remove cardboard from beneath dryer. Place a level on top

edges of dryer, checking each side and front. If not level,

tip dryer and adjust legs up or down as shown in Step 3,

repeating as necessary.

2. Grip dryer from top and rock back and forth, making sure all

four legs are rmly on oor. Repeat, rocking dryer from side

to side. If dryer rocks, go to Step 3 and adjust leveling legs.

3. If dryer is not level, use a 1" or 25 mm open-end or adjustable

wrench to turn the leveling leg counterclockwise to lower the

dryer or clockwise to raise the dryer. Recheck levelness of

dryer and that all four legs are rmly in contact with the oor.

Repeat as needed.

HELPFUL TIP: You may want to prop up front of dryer about

4" (102 mm) with a wood block or similar object that will

support weight of dryer.

(appearance may vary)

Not Level LEVEL Not Level

(appearance may vary)