Installation guide

18
TECHNICAL SPECIFICATIONS – GAS DRYER
220–240V~50Hz 1ph 3A max. IP24 Clothes capacity: 9.0 kg max. Sound pressure level, Lpa: 58 dBA (uncertainty, Kpa: +/-10 dBA) Total mass: 68 kg max.
Country: CH, CZ, CY, ES, GB, GR,
HR, IE, IT, PT, SI, SK, TR
CY, CZ, DK, EE, FI, GR, HU,
IT, NO, RO, SE, SK, TR
European Gas Category:
II
2H3+
II
2H3B/P
Gas Flow Rate: .562703 m
3
/hr 0.562703 m
3
/hr
Supply Pressure (G20): 20 mbar 20 mbar
Factory Adjusted Pressure: 7.4 mbar 7.4 mbar
European Country: CH, CZ, CY, ES, GB, GR, HR,
IE, IT, PT, SI, SK, TR
CY, CZ, DK, EE, FI, GR, HU,
IT, NO, RO, SE, SK, TR
European Gas Category:
II
2H3+
II
2H3B/P
Butane Supply Pressure (G30): 28–30 mbar 30 mbar
Adjusted Pressure: N/A N/A
Propane Supply Pressure (G31): 37 mbar 30 mbar
Adjusted Pressure: N/A N/A
European Country: FR, BE
European Gas Category:
I
2E+
Supply Pressure (G20): 20 mbar
Supply Pressure (G25): 25 mbar
Adjusted Pressure: N/A
Country: AS, NZS
Supply Pressure (G20) minimum 1.13 kPa
Adjusted Pressure (Test Point Pressure): 0.74 kPa
Nominal Hourly Gas Consumption 21.1 MJ/h
Country: AS, NZS
Propane Supply Pressure: 2.75 kPa
Adjusted Pressure: 2.75 kPa
Nominal Hourly Gas Consumption: 23 MJ/h
Country: NL
European Gas Category:
II
2L3B/P
Gas Flow Rate: 0.562703 m
3
/hr
Supply Pressure (G25): 25 mbar
Factory Adjusted Pressure (G25) : 7.4 mbar
Supply Pressure (G30/G31): 30 mbar
Factory Adjusted Pressure (G30/G31): N/A
NOTE: Conversion kit: From Natural Gas to LP Gas - Europe: Whirlpool Part No. W10233219.
Conversion kit: From Natural Gas to LP Gas - Australia: Whirlpool Part No. W10315369.
Conversion kit: From Natural Gas to Natural Gas - France/Belgium: Whirlpool Part No. W10181947.
Manufacturer: Whirlpool Corporation, Benton Harbor, Michigan 49022, U.S.A.
Manufacturing Site: Whirlpool Corporation, 1300 Marion-Agosta Rd., Marion, OH, 43302, U.S.A.
EU Representative: Whirlpool Europe s.r.l. Viale Guido Borghi 27, 21025 Comerio (VA) Italy.
Factory set for NATURAL GAS: Injector size: 2.2 mm Heat input gross: 5.9 kW
With LP Gas Conversion Kit: Injector size: 1.25 mm Heat input gross: 6.4 kW
With France/Belgium NATURAL GAS conversion kit: Injector size 1.65 mm Heat input gross: 5.9 kW
Factory set for Australia/New Zealand NATURAL GAS: Injector size: 2.2 mm Heat input gross: 5.9 kW
With Australia LG Gas Conversion Kit: Injector Size: 1.40 mm Heat input gross: 6.54 kW
Factory set for NATURAL GAS: Injector size: 2.2 mm Heat input gross: 5.0 kW