Installation guide

7. With alevel, checkthe dryer, andmakenecessaryadjustmentsto the leveling legs. Once
level, tighten the leveling leg locking nutswith a wrench.
8. The dryer door direction canbereversed.
1. If thedryer is pluggedin, unplug thedryer from theelectricalservice.
2. Removethe hingehole coversandcrews. Movethe door catchcoverto the
oppositeside.
3. While supportingthe door, remove2 screwsin the hinges that secure the hinges
to the cabinet.
4. Remove door by lifting slightly at kinges and pulling the hinge tabs out of the
hinge slots.
5. Move the following parts to the opposite side of the of the door: 2 hinges and
4 hinge screws, 4 door screws, door strike and screw, kmer door cover plate
and screw.
6. Attach the door to the opposite side of the cabinet using the 2 counter sunk hinge
screws (See below).
7. Driving the lower hinge screw first wilt help to align the door and hinges.
8. Replace the hinge hole covers and screws in the opposite side.