Installation guide

ELECTRICAL REQUIREMENTS
NOTE: Wiring diagram is located inside the control console.
WARNING - To
prevent urlr_ecas-
sary risk of fire,
electrical shock or
personal injury, all
wiring and
grounding must
be done in accordance with
focal codes, or in the absence
of local codes, with the Na_
tional Electrical Code, ANSI/
NFPA (for the Untted States) or
the Canadian Electrical code
CSA C22,1 (for Canada).
GROENDING
This dryer must be grounded. In the event of malfunction or breakdown, the ground wilI
reduce the risk of electrical shock by providing a path of teast resistance for electric current.
GAS MODELS
This appliance is equipped with a cord having an equipment-grounding conductor and a
grounding pIug. The ptug must be pIugged into an appropriate outlet that is properly
installed and grounded in accordance with all loca! codes and ordinances.
WARNING- Improper
connection of the
equipment grounding
conductor can result in
a risk or electric
shock. Check with a
qualified electrician or
serviceman if you are in doubt as to
whether the appliance is properly
grounded,