Instruction Sheet

DISPLAY KIT INSTALLATION INSTRUCTIONS
FOR FREESTANDING COMMERCIAL RANGES
ENSEMBLE D'EXPOSITION POUR CUISINIÈRES
AUTOPORTANTES À USAGE COMMERCIAL
INSTALLATION INSTRUCTIONS
IMPORTANT:
■ This kit is intended only for showroom purposes.
■ The dealer is responsible for returning the product to its
original operating condition before selling to the customer.
■ This kit must be installed by qualified personnel only. This kit
is to be used only for the models listed in “SKU List.”
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
■ Phillips screwdriver
■ ¼" nut driver
Parts supplied
■ Rounded power cord with 3 prong grounded plug
■ Strain relief retainer
Electrical Requirements
Observe all governing codes and ordinances.
Ensure that the electrical installation is adequate and in
conformance with National Electrical Code, ANSI/NFPA 70 (latest
edition), or CSA Standards C22.1-94, Canadian Electrical Code,
Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes
and ordinances.
If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that the
ground path is adequate.
Table of Contents / Table des matières
INSTALLATION INSTRUCTIONS.....................................1
Tools and Parts...............................................................1
Electrical Requirements..................................................1
Electrical Connection......................................................2
SKU List..........................................................................2
INSTRUCTIONS D’ INSTALLATION.......................................... 3
Outils et pièces ...........................................................................3
Spécifications électriques...........................................................3
Raccordement électrique ...........................................................3
Liste de SKUs .............................................................................4
W10221321D
IMPORTANT:
Save for local electrical inspector's use.
IMPORTANT :
À conserver pour consultation par l'inspecteur local des installations électriques.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING