Control Guide

4
Cooktop On Indicator Light
The Cooktop On indicator light is located on the console panel.
When any control knob/cooktop element on the console panel is
turned on, the Cooktop On indicator light will glow.
Hot Surface Indicator Light
On ceramic glass models, the hot surface indicator light is located
on the console panel.
The hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area is turned off.
Dual Zone Cooking Element (on some models)
The Dual Zone cooking element offers flexibility depending on the
size of the cookware. Single size can be used in the same way as
a regular element. The dual size combines both the single and
outer element and is recommended for larger size cookware.
A. Dual
B. Single
Warming Center Element
Use the Cooktop Warming Center element to keep cooked foods
warm. One hour is the recommended maximum time to maintain
food quality.
Do not use it to heat cold foods.
The Warming Center element can be used alone or when any of
the other surface cooking areas are being used.
The Warming Center element area will not glow red when cycling
on. However, the Element On light will glow while the Cooktop
Warming Center element is in use.
� Use only cookware recommended for oven and cooktop use.
� Cover all foods with a lid or aluminum foil. When warming
baked goods, allow a small opening in the cover for moisture
to escape.
� To avoid damage to the cooktop, do not use plastic wrap to
cover food because the plastic wrap may melt.
� Use pot holders or oven mitts to remove food.
To Use:
1. To turn on, press WARMING CENTER ON/OFF and then
press COOKTOP WARM ZONE CONFIRM.
2. To turn off, press WARMING CENTER ON/OFF again.
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base, they can leave permanent marks on the surfaces.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has
the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
Check for flatness by placing the straight edge of a ruler across
the bottom of the cookware. While you rotate the ruler, no space
or light should be visible between it and the cookware.
Use the following chart as a guide for cookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum
� Heats quickly and evenly.
� Suitable for all types of cooking.
� Medium or heavy thickness is best for
most cooking tasks.
� May leave aluminum residues, which
may be diminished if cleaned
immediately after cooking.
Cast iron
� Heats slowly and evenly.
� Good for browning and frying.
� Maintains heat for slow cooking.
� Rough edges or burrs may scratch the
cooktop.
Ceramic or
Ceramic glass
� Follow manufacturer’s instructions.
� Heats slowly, but unevenly.
� Ideal results on low to medium heat
settings.
� May scratch the cooktop.
Copper
� Heats very quickly and evenly.
� May leave copper residues, which may
be diminished if cleaned immediately
after cooking.
� Can leave a permanent stain or bond to
the cooktop if overheated.
Earthenware
� Follow manufacturer’s instructions.
� Use on low heat settings.
� May scratch the cooktop.