Use and Care Manual

7
Bridge Element (on some models)
The bridge element allows flexibility in the left side cooking area.
Use the bridge area to create an oblong heated area to cook with
large cookware.
Use the bridge element to create an oblong heated area to cook
with oblong pans.
To use Single (C):
1. Push in and turn front left knob from Off position to the
Single zone anywhere between Lo and Hi.
2. Turn knob to OFF when finished.
To use Single and Bridge area (C + B):
1. Push in and turn front left knob from Off position to the Bridge
zone anywhere between Lo and Hi.
2. Turn knob to OFF when finished.
To use Single (A):
1. Push in and turn rear left knob from Off position anywhere
between Lo and Hi.
2. Turn knob to OFF when finished.
To use both Single elements and Bridge (A + B + C):
1. Turn on Single and Bridge (C + B).
2. Turn on Single (A).
3. Turn knobs to OFF when finished.
Warming Center
Use the cooktop Warming Center to keep cooked foods warm.
One hour is the recommended maximum time to maintain food
quality.
Do not use it to heat cold foods.
The Warming Center can be used alone or when any of the other
surface cooking areas are being used.
The Warming Center area will not glow red when cycling on.
However, the Cooktop On indicator light will be displayed when
the Warming Center is in use.
■ Use only cookware recommended for oven and cooktop use.
■ Cover all foods with a lid or aluminum foil. When warming
baked goods, allow a small opening in the cover for moisture
to escape.
■ To avoid damage to the cooktop, do not use plastic wrap
to cover food because the plastic wrap may melt.
■ Use pot holders or oven mitts to remove food.
To Use:
1. To turn on, press WARMING CENTER ON and then START.
2. To turn off, press WARMING CENTER OFF.
A
B
C
A. Single size
B. Bridge area
C. Single size
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.