Installation guide

Flexibleconduitfromtheovenshouldbeconnecteddirectlyto
thejunctionbox.
Donotcuttheconduit.Thelengthofconduitprovidedisfor
serviceabilityoftheoven.
AULlistedorCSAapprovedconduitconnectormustbe
provided.
• Ifthehousehasaluminumwiringfollowtheprocedurebelow:
1. Connectasectionofsolidcopperwiretothepigtail
leads.
2. Connectthealuminumwiringtotheaddedsectionof
copperwireusingspecialconnectorsand/ortools
designedandULlistedforjoiningcoppertoaluminum.
Followtheelectricalconnectormanufacturer'srecommended
procedure.Aluminum/copperconnectionmustconformwith
localcodesandindustryacceptedwiringpractices.
INSTALLATIONINSTRUCTIONS
1.
Decide on the final location for the oven. Locate existing
wiring to avoid drilling into or severing wiring during
installation.
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
Remove Oven Door.
IMPORTANT: Use both hands to remove oven doors.
1. Open oven door to the full open position.
2. Locate the oven door latches in both corners of the oven door.
3. Using a Phillips screwdriver, remove the screw and door hinge
cover plate above each door latch slot in the oven frame.
2. To avoid floor damage, set the oven onto cardboard prior to
installation. Do not use handle or any portion of the front
frame or trim for lifting.
3. Remove the shipping materials and tape from the oven.
4. Remove the hardware package from inside the bag containing
literature.
5.
Remove and set aside racks and other parts from inside the
oven.
6.
7. Open the oven door.
Move oven and cardboard close to the oven's final location.
4.
A. Hinge cover plate screw
B. Hinge cover plate
C. Hinge
Grasp the edges of the oven door with both hands and close
the oven door halfway. Lift and pull oven door toward you and
remove. Set the oven door aside on a covered surface.