Manual

NOTE: If the freezer is laid on its side
during shipping or transport, place the
freezer upright and wait 12 hours before
plugging it in. This prevents damage to
the freezer.
KNOB
<11
The temperature control knob ',4_4
is located on the outside of
the freezer cabinet on the 7
lower right side. To adjust 4
the temperature control, 3j-V-_5
place a flat-bladed screw- 2 _'F:_ _._ 6
driver or coin into slot and ' /
turn to the desired setting, o
The freezer temperature control uses a
range of settings from 0 to 7. When set at
zero the freezer is OFF-it does not cool
or maintain a cool temperature. Setting 1
is the warmest temperature setting and
setting 7 is the coldest.
Initial control setting:
1. Set the freezer control on 4.
2. Allow the freezer to cool 6 to 8 hours
before filling with frozen food. Let the
freezer cool overnight before adding
large amounts of unfrozen food.
Never add more than 2 to 3 pounds of
unfrozen food per cubic foot of freezer
space.
3. 24 hours after adding food, adjust
control as desired.
NOTE: When the freezer is first started,
the compressor will run constantly until
the cabinet is cooled. This may take up to
6-8 hours or longer, depending on room
temperature and the number of times the
freezer is opened.
The outside of your freezer may feel
warm. This is normal. The freezer's
design and mainfunction is to removethe
heat from packages and air space inside
the freezer. This heat istransferred to the
room air, so the outsideof the freezer may
feel warm.
Adjusting the control:
1. Set household thermometer snugly
between frozen packages or place
thermometer in a glass of vegetable
oil, placed in freezer (vegetable oil will
not freeze).
• Thermometer should be designed for
use with freezer.
• Thermometer should read tempera-
tures ranging from -5° to 50° F
(-21° to 10° C).
2. Wait 5 to 8 hours.
3. Check temperature.
• Temperatureshould read0° F(-18° C)
or slightly below.
4. If temperature is not in range, adjust
control only one number at a time.
• Turn the control to a higher number if
a colder temperatureis desired.
• Turnthe controlto a lower number if a
less cold temperatureis desired.
5. Wait an additional 24 hours and
recheck temperature.
5