Manual

&
. I£1
BURNER CAPS AND SEALED
GAS BURNERS
RemovableBurner Caps
II Allowburnerto cool.Removeburnercap
and wash in soapywater with a plastic
scouringpad. For stubbornsoils, clean
with a soap-filled, nonabrasivepad or
Cooktop Cleaning Creme (Part
#20000001)**and asponge.
II Do not cleanindishwasherorself-clean-
ingoven.
SealedGas Burner
| Clean frequently.Allow burnerto cool.
Cleanwithsoapandplasticscouringpad.
Forstubbornsoils,cleanwithasoap-filled,
nonabrasivepad.
II Becarefulnotto getwaterintothecenter
of the burner.
| Usecarewhencleaningthe ignitor.Ifthe
ignitor is wet or damaged the surface
burnerwill notlight.
| Toensureevencookingperformance,keep
burnerportsfree of foodsoils/debris.
BURNER GRATES- PORCELAIN
ON CAST iRON
Washgrateswithwarm,soapywaterand
a nonabrasive,plasticscrubbingpad.For
stubbornsoils, clean with a soap-filled,
nonabrasivepad or Cooktop Cleaning
Creme(Part#20000001)**andasponge.
Ifsoil remains,reapplyCooktopCleaning
Creme,cover with a damp papertowel
and soak for 30 minutes.Scrub again,
rinseanddry.
Do notcleanindishwasherorself-clean-
ingoven.
CONTROL KNOBS
| Removeknobs in the OFF positionby
pullingup.
II Wash,rinseanddry.Do notuseabrasive
cleaningagentsasthey mayscratchthe
finish.
| Turnoneachburnerto besuretheknobs
havebeencorrectlyreplaced.
COOKTOP- PORCELAIN
ENAMEL
Porcelainenamelisglassfusedon metaland
may crack or chip with misuse. It is acid
resistant,not acidproof.All spillovers,espe-
cially acidicor sugaryspillovers,should be
wipedupimmediatelywitha dry cloth.
II When cool,wash withsoapywater,rinse
anddry.
| Neverwipeoffawarmorhotsurfacewitha
damp cloth. This may cause crackingor
chipping.
I Neveruseovencleaners,abrasiveorcaus-
tic cleaning agentson exterior finish of
range.
COOKTOP - STAINLESS STEEL
(SELECT MODELS)
| DO NOT USE ANY CLEANINGPROD-
UCTCONTAININGCHLORINEBLEACH.
| ALWAYSWIPEWITHTHEGRAINWHEN
CLEANING.
I DailyCleaning/Light Soil -- Wipe with
one of the following- soapywater, white
vinegar/watersolution,Formula409Glass
and SurfaceCleaner*or a similar glass
cleaner-usingaspongeorsoftcloth.Rinse
anddry.To polishandhelppreventfinger-
prints, follow with StainlessSteel Magic
Spray(PartNo.20000008)**.
I Moderate/HeavySoil-- Wipewithoned
thefollowing-BonAmi*,SmartCleanser*,
orSoftScrub*-usingadampspongeorsoft
* Brandnamesare registeredtrademarksof the respectivemanufacturers.
** To ordercall 1-800-688-8408.
cloth.Rinseanddry.Stubbornsoilsmaybe
removedwith a damp Scotch-Brite*pad;
rubevenlywiththegrain.Rinseanddry.To
restorelusterand removestreaks,follow
withStainlessSteel MagicSpray.
Discoloration-- Usingadampspongeor
softcloth,wipewithCameoStainlessSteel
Cleaner*.Rinseimmediatelyand dry. To
removestreaksand restoreluster,follow
withStainlessSteel MagicSpray.
SURFACEBURNERFAILSTOLIGHT.
| Checkto besureplugis securelyinserted
into receptacle.
| Checkor re-setcircuit breaker. Checkor
replacefuse.
| Checkpowersupply.
| Checkto besure burneris correctlyrated
for your kindof gas.
| Checkto be sure burnerportsor ignition
portsarenot clogged.
| Checkto besureignitorisdry andclicking.
Burnerwill not light if ignitor is damaged,
soiled or wet. If ignitor doesn'tclick,turn
controlknob OFF.
| Check to be sure burnercap is correctly
seatedon the burnerbase.
SURFACEBURNERFLAME LIFTS
OFF PORTS.
| Check to be sure a pan is sitting on the
grateabove.
| Contactan authorizedMaytagservicer.
THE FLAME IS UNEVEN.
II Burnerports maybeclogged.
| Flamemay needto be adjusted.Contact
an authorizedMaytagservicer.
SURFACE BURNER FLAME IS
YELLOW IN COLOR.
| Contactan authorizedMaytagservicer.
| Someyellowtipsonthe flameareaccept-
ablewhen usingLPgas.