Instruction Sheet

5
Burner Models for Kit W10676662
Burner locations
6. Remove all burner caps and burner bases (see the User
Guide for burner reference).
To remove the burner base for the Dual Flame and Dual Tier
Ultra Torch burners use a Torx
®
T10 driver to remove the screw.
7. To Convert Standard Burner:
■ Use 7.0 mm wrench to loosen and remove the orifice
spud (A).
■ Set gas orifice spud aside.
■ Replace with correct LP gas orifice spud. See LP gas
orifice spud charts.
8. To Convert Dual Tier Ultra and Dual Flame Burners:
■ Use 7.0 mm wrench to loosen and remove the inner
orifice spud (A) and the outer orifice spud (B).
■ Set gas orifice spuds aside.
■ Replace with correct LP gas orifice spuds. See the LP gas
orifice spud charts.
Model No. Left
Front
Left
Rear
Center
Inner
Center
Outer
Right
Rear
Right
Front
Inner
Right
Front
Outer
KCGS550E 89
Black
66
White
45
Blue
97
Brown
70
Green
89
Black
N/A
KCGS556E 89
Black
66
white
45
Blue
101
Yellow
70
Green
89
Black
N/A
KCGS950ES 89
Black
66
White
45
Blue
97
Brown
70
Green
40
Pink
80
Pink
KCGS956ES 97
Orange
66
White
45
Blue
105
Red
70
Green
40
Pink
80
Pink
A. Left front
B. Left rear
C. Center
D. Right rear
E. Right front
Dual Tier Ultra Burner
A. Inner burner cap
B. Outer burner cap
C. Gas tube opening
D. Burner base
Standard and Dual Flame
A. Burner cap
B. Igniter electrode
C. Burner base
D. Gas tube opening
B
D
C
E
A
D
A
B
C
A
B
C
D
Torch Burner
A. Inner burner cap
B. Inner burner base
C. Outer burner base
D. Burner support
E. Gas tube opening
A. Orifice spud
Dual Tier Ultra Burner
A. Inner orifice spud
B. Outer orifice spud
Dual Flame Burners
A. Inner orifice spud
B. Outer orifice spud
E
D
A
B
C
A
A
B
A
B