Installation Guide

8. Reinstall hinge and latch on

opposite sides

Using a TORX T25

screwdriver, reinstall the latch plate, latch

backing plate, and hinge assembly on the opposite sides from

which they were removed.

7. Remove hinge and latch

Using a TORX T25

screwdriver, remove the 3 TORX

screws

securing the latch plate and latch backing plate and the

5 screws holding the hinge assembly in place.

Hinge

Latch

9. Reinstall inner door assembly

Position the door with the inside of the door facing up.

Reinstall the 10 screws securing the inner door to the

outer door.

10. Reinstall door on dryer

Using a TORX T25

screwdriver, remove the 4 screws on the

dryer. Insert the tabs on the hinge into the mounting slot and

slide down to engage the top tab. Secure in place with the

4 TORX T25

screws removed earlier.

Bottom

of door