Specification

Electric Dryer
PRODUCT MODEL NUMBERS
W10676165B
02/2016
MED3100D, MED4100D, MED5100D,
MED7100D, MED8100D
Back view:
NOTE: Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See “Venting
Requirements.”
Side view:
Front view:
* Approx. measurement
DRYER DIMENSIONS
* Approx. measurement
Recommended installation clearances (dryer only):
Installation spacing for recessed area
or closet installation
All dimensions show recommended and minimum spacing allowed.
■ Additional spacing should be considered for ease of
installation and servicing.
■ Additional clearances might be required for wall, door, oor moldings, dryer venting, and gas line.
■ Additional spacing should be considered on all sides
of the dryer to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door
are required. Louvered doors with equivalent ventilation openings are acceptable.
■ Companion appliance spacing should also be considered.
18" min.
(457 mm)
1"*
(25 mm)
0" - 5"*
(0" - 127 mm)
24 in.
2
min.
(155 cm
2
)
48 in.
2
min.
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
*
* 0" (0 mm) spacing is allowed.
*
(
27"
(686 mm)
38
3
/4" Min.
(984 mm)
39" Max.
(990 mm)
6
1
/2"
(165 mm)
29
7
/8"*
(759 mm)
3
1
/2"*
(89 mm)
6
1
/8"*
(156 mm)
14
3
/8"
(365 mm)
3
/4"*
(18 mm)
Power supply
cord/cable
Water inlet
(Steam models only)
Vent