User`s guide

22
Check these points if . . .
Oven will not
self-clean.
Oven did not
clean properly.
Oven door will not open
after self-clean cycle.
Moisture
condensation collects
on oven window.
Strong odor or
light smoke occurs
when oven is turned on.
“F” plus a number
appears in
the display.
• Check to make sure controls are set properly.
• Check to make sure the cycle is not set for a delayed start.
• Check if door is closed.
• Longer cleaning time may be needed.
• Excessive spillovers, especially sugary and or acid foods, were not removed prior to the self-
clean cycle.
• Oven interior is still hot. Allow about one hour for the oven to cool after the completion of
a self–clean cycle. The door can be opened when the LOCK indicator light is not displayed.
• This is normal when cooking food high in moisture.
• Excessive moisture was used when cleaning the window.
• This is normal for a new range and will disappear after a few uses. Initiating a clean cycle
will “burn off” the smells more quickly.
• Turning on a ventilation fan will help remove the smoke and/or odor.
• Excessive food soils on the oven bottom. Use a self–clean cycle.
•
This is called a fault code. If a fault code appears in the display and beeps sound, press
the CANCEL pad. If the fault code and beeps continue, disconnect power to the
appliance. Wait a few minutes, then reconnect power. If fault code and beeps still
continue, disconnect power to the appliance and call an authorized servicer.
• If the oven is heavily soiled, excessive flare-ups may result in a fault code during a clean
cycle. Press CANCEL pad and allow the oven to cool for one hour, then reset the clean
cycle. If the fault code and beeps still continue, disconnect power to the appliance and
call an authorized servicer.
If You Need Service:
• Call the dealer from whom your appliance was purchased or call Maytag Appliances Sales Company, Maytag
Customer Assistance at 1-800-688-9900, USA or 1-800-688-2002, CANADA to locate an authorized servicer.
• Be sure to retain proof of purchase to verify warranty status. Refer to WARRANTY (next page) for further informa-
tion of owner’s responsibilities for warranty service.
• If the dealer or service company cannot resolve the problem, write to Maytag Appliances Sales Company, Attn:
CAIR
SM
Center, P.O. Box 2370, Cleveland, TN 37320-2370, or call 1-800-688-9900, USA or 1-800-688-2002,
CANADA.
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
NOTE: When writing or calling about a service problem, please include the following information:
a. Your name, address and telephone number;
b. Model number and serial number;
c. Name and address of your dealer or servicer;
d. A clear description of the problem you are having;
e. Proof of purchase (sales receipt).
• User’s guides, service manuals and parts catalogs are available from Maytag Appliances Sales Company,
Maytag Customer Assistance.