User`s guide

The control panel is designed for ease in programming. The display window on the electronic control shows time of day,
timer and oven temperatures.
NOTE: Styling and features may differ slightly depending on the model.
Controls at a Glance
5
00:00
BAKE
BROIL
CLEAN
STOP
TIME
COOK
TIME
CANCEL
SET
TIMER
CLOCK
OVEN ON
PREHEAT
LOCK
For example: If you set the oven to bake
at 350°F and then set a timing operation,
the indicator light on the BAKE pad will
“dim” and the indicator light on the
TIMER pad will be “full on.”
The display will show the operation for
the pad with the “full on” indicator light.
Press the function pad with the “dim”
indicator light to recall that operation.
NOTE: If more than 30 seconds elapse between pressing
a function pad and a ▲ or ▼ pad, the program will be
canceled and the display will return to the previous
display.
BAKE Pad
Use for baking or roasting.
1. Press BAKE pad.
2. Press ▲ or ▼ pad until the correct oven temperature
appears in the display.
See page 10 for additional information.
BROIL Pad
Use for top browning and broiling.
1. Press BROIL pad.
2. Press ▲ or ▼ pad for HI or LO broil.
See page 12 for additional information.
Function Pads
• Press, or press and hold, these pads to enter time,
oven temperature or to select HI or LO broil. No
beep will sound when these pads are
pressed.
• Press this pad to cancel all operations
except the TIMER and CLOCK.
• Function pads are the BAKE, BROIL, CLEAN, TIMER,
CLOCK, COOK TIME, STOP TIME, and CANCEL
pads. A beep will sound when these pads are pressed.
• All function pads except the CANCEL pad feature an
indicator light.
When BAKE or BROIL pad is pressed, the indicator light
will turn on to let you know that the oven is set for
this operation.
Indicator lights on CLEAN, TIMER, CLOCK,
COOK TIME and STOP TIME pads will flash
when the pad is pressed. These indicator lights
will stop flashing but will remain lit once the
function starts.
• If an indicator light on a function pad is lit and you set a
second operation:
– Either the control will not accept the operation or
– The indicator light on the first pad will “dim” slightly
and the indicator light on the pad you just pressed will
be “full on.” This lets you know that you have set the
control for two operations.
SET
CANCEL
BAKE
BAKE
BAKE
TIMER
“Dim”
“Full
On”