User`s guide

6
Setting the Timer
The timer can be set from one minute (0:01) up to 9 hours
and 50 minutes (9:50).
The timer can be used independently of any other oven
activity and it can be set while another oven function is
operating. THE TIMER DOES NOT CONTROL THE
OVEN.
1. Press the TIMER pad.
2. Press or press and hold the ▲ or ▼ pad until the correct
time appears in the display.
• The timer will start automatically. The TIMER
indicator on the TIMER pad will light whenever the
timer is in use.
• One long beep and “End” will be briefly displayed
to signal the end of the timer operation.
To cancel timer: Press and hold TIMER pad for three
seconds. Time of day will reappear in the display.
Control Options
Clock Controlled
Oven Cooking Beep Option
Option 1. (default option) Four beeps at the end of
cooking, then, one beep every 30 seconds for the next
five minutes or until the CANCEL pad is pressed.
Option 2. Four beeps at the end of cooking, then, no
other beeps.
Option 3. Four beeps at the end of cooking, then, one
beep every minute for the next 12 hours or until the
CANCEL pad is pressed.
Setting Clock Controlled
Oven Cooking Beeps
1. Press COOK TIME and CLOCK pads at the same
time and hold for three seconds.
• A single beep will sound.
• Display will show current option.
2. Press the ▲ or ▼ pad to select the option number you
wish. The current time of day will reappear in the
display after four seconds.
CLEAN Pad
Use to set self–clean cycle.
For models with a manual door lock:
1. Close and lock oven door.
2. Press CLEAN pad. “3:00” will appear in the display.
3. Oven will automatically clean for 3 hours or press
▲ or ▼ pad to select 2 to 4 hours of cleaning.
For models with an automatic door lock:
1. Press CLEAN pad. “– : – – ” will appear in the display.
2. Press ▲ or ▼ pad. “3:00” hours of cleaning time will
automatically be entered.
3. If more or less cleaning time is desired, press
▲ or ▼ pad to select times between 2 to 4 hours.
See pages 14-15 for additional information.
COOK TIME/STOP TIME Pads
Use to program the oven to start and stop automatically.
1. Press COOK TIME pad and enter the desired cooking
time.
2. Press the BAKE pad and enter oven temperature.
3. To delay the start of cooking, press the STOP TIME pad
and enter the time you wish the oven to turn off.
See page 13 for additional information.
Setting the Clock
1. Press CLOCK pad.
2. Press or press and hold ▲ or ▼ pad until the correct time
of day appears in the display.
The display will flash when electrical power is first supplied
to the range or if there has been a power failure.
To recall the time of day when another function is displayed,
press the CLOCK pad.
Clock time cannot be changed when the oven has been
programmed for clock controlled cooking, self-clean or
delayed self-clean.