Installation guide

. Move washer/dryer to final location

Outer Access Panel Inner Access Panel

If you are working in a closet or recessed area: move the

washer/dryer into its final location and remove cardboard

from under washer/dryer. Remove the outer access panel by

removing 3 Phillips-head screws and one bumper, located at

the top of the access panel. Remove inner access panel by

removing clip, cover, and 2 screws. Set panels, screws,

clip, inner access panel cover, and bumper aside. Complete

hookup of water hoses and vent. Replace access panels upon

completion of washer/dryer installation.

Standpipe

Secure drain hose to laundry tub leg, drain standpipe, or inlet

hoses for wall standpipe with shipping strap removed earlier.

_}. Check for leaks

Turn on water faucets to check for leaks. A small amount of

water may enter washer. It will drain later.