Laundry Installation Requirements

Installation Service – Dryer (Gas)
INSTALL COMPLETE -
HDFSICG – Home Delivery Free Standing Install Complete Gas
Uncrate, remove packing materials, supply and connect one 4" x 8' vent pipe and up to 2 elbows, attach legs, level, supply and connect
gas flex line to existing shut-off valve, attach steam assist kit if required, test unit for proper operation, haul away trash, and haul away
old appliance if requested. (Must be like product).
HDPED – Home Delivery Pedestal
If Pedestal is ordered with appliance
Parts included with the Installation of a Dryer: (Parts are included only when installation is performed)
½” flex gas line
Steam Assist Kt (if needed) Dryer Venting
Services included with the Installation of a Dryer:
 The delivery provider will cover finished floors with a protective material to limit the possibility of property damage
 The delivery provider will haul away old unit if customer request, (like product only), or move to another location. Up or down
one floor.
 The delivery provider will attach pedestal if purchased with appliance.
Obstacles that could prevent the installation:
 The delivery provider will only deliver if the person receiving the delivery is 18 years of age or older.
 Only new parts provided by the delivery provider are allowed. Existing parts or other obtained elsewhere cannot be used.
 The delivery provider will remove only exterior doors (Hinge pins) to gain access; we will not remove interior doors, hand rails,
banisters, screen doors, or move customers possessions to perform services.
 The delivery provider does not perform LP gas conversions.
 Cabinet opening must be large enough for appliance to be installed. No cabinet modification will be made.
 Old product must be free of any clothing or debris.
 The delivery provider can only connect venting to 4” rigid pipe that is within 8’ of the appliance.
 The delivery provider cannot connect to plastic or foil venting.
 The delivery provider will not connect to any existing venting.
 The electrical outlet is not properly secured in a junction box with a cover plate and is beyond 2’ from the rear of the appliance.
 Garage installation code requires that the dryer must be a minimum of 18” above the parking surface.
 If installed in a closet, proper ventilation requirements must be met. Review manufacturer’s installation instructions.