Manual

6
Freezer Leveling and Door Closing
Style 1—Without Grille
1. Locate the two front leveling legs taped among the packing
materials.
2. Screw these legs into the front holes on the bottom of the
freezer. The back of the freezer rests on two xed supports.
3. Adjust the front legs enough to lift the cabinet up off the oor.
4. Place a leveling tool on top of the freezer rst side to side,
then front to back. Turn leg counterclockwise to raise a
corner. Turn leg clockwise to lower a corner.
5. Repeat Step 4 until freezer is level.
6. After freezer is fully loaded with food, recheck with level as in
Step 4.
Style 2—With Grille
Your freezer has two front adjustable legs — one on each side.
The back of the freezer rests on two xed rollers. The base grille
covers the adjustable brake feet and roller assemblies located at
the bottom of the freezer below the freezer door. Before making
any adjustments, remove the base grille and move the freezer to
its nal location.
Tools Needed: 1/4" hex driver, Phillips screwdriver
1. Remove the base grille screws. Grasp the grille rmly and pull
it toward you. Open the freezer door to access the brake feet.
A
2
3
A
B
B
C
A
B
A
B
A. Top Hinge Cover
B. 5/16" Hex-Head Hinge Screws
C. Top Hinge
A. Hinge Pin
B. 3/8" Hex-Head Hinge Screws
A. Hinge Pin
B. 3/8" Hex-Head Hinge Screws
A. Cabinet Hinge Hole Plugs
Door Removal and
Replacement
Door Swing Reversal (optional)
Top Hinges
Bottom Hinges
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.