Manual

ManualsBrandsMaytech ManualsE-Skates PartsMaytech Mini Wireless Remote for e-Skateboard

Maytech MTSKR1712 Remote control Users Manual V2.1

Maytech Electronics Co.,Ltd第1页 共5页

User Manual of Electric Skateboard

Remote Controller MTSKR1712

V2.1

19/June/2017



By Eric Sun (Engineering Department)

By Maytech Sales Team

Summary of content (5 pages)

PAGE 1
Maytech MTSKR1712 Remote control Users Manual V2.1 User Manual of Electric Skateboard Remote Controller MTSKR1712 V2.1 19/June/2017 By Eric Sun (Engineering Department) By Maytech Sales Team Maytech Electronics Co.
PAGE 2
Maytech MTSKR1712 Remote control Users Manual V2.1 Ⅰ. Functions 1. 2.4GHZ two-way communication, 126 channel, automatic frequency modulation for anti-interference; 2. 40bit ID code, very low probability of repeated code; 3. 20 meters communication distance; 16 hours working time after fully charged; 4. Built-in 420Mah lithium battery, with USB Charger Port 5. With Blue/Green LED lights, remote case is strong, and resist cracks.; 6. High and low speed can be easily switched. 7.
PAGE 3
Maytech MTSKR1712 Remote control Users Manual V2.1 Ⅳ Structure Description： LED1: Status Indicator LED2: Remote Battery indicator LED3: Skateboard battery indicator BUTTON: Switch On/Off/High/Low speed THROTTE: Direction & Speed Control CHARGE: Micro USB charging port Ⅴ Preparation work before using： 1. Check remote and receiver surface, especially make sure there is no impurity and dust on receiver PCB. 2.
PAGE 4
Maytech MTSKR1712 Remote control Users Manual V2.1 2) Press the remote control ON/OFF button for 2seconds. Remote has switched on when 3 leds light, continue to press the on/off button to enter self-detection status for 3 seconds, 3 leds flash quickly. 3) Connect power to receiver, LED 4(Red light) quickly flashes. The receiver is in searching status and auto-pairing with remote control. Red led lights steady. Pairing competed. 3.
PAGE 5
Maytech MTSKR1712 Remote control Users Manual V2.1 Note: This function only is realized when working with Maytech dual ESC (MTDU30A) and the battery is 10S Lipo cells. It is not workable if with other brand speed controllers or the battery is other Lipo cells. 5. Battery charge status LED2 light up. (If battery voltage is below 3.4V, LED2 light up steadily even remote is not charging. When charging, LED2 flashes every 0.5 second.) When fully charged, LED2 light off. Ⅹ LED4 state description 1.