User's Manual

Normal Audio Output mode Loud Audio Output mode
Note;
1) The "C 1" is the lowest microphone sensitivity level and "C 5" is the highest.
2) Its default setting is "C 1".
It is available to select the microphone sensitivity up to 5 steps according
to the environment you have. Press and hold the "Mode" button longer
than 3 seconds after turn the device power on.
The "GRP" is blinking on the LCD. Press the "Mode" button 5 times instantly.
Select the microphone sensitivity level 1 ~ 5 as per you desire by press "▲"
or "▼" button and then release all the buttons longer than 5 seconds to x it.
3.7 Portable using
It is available to use the Stationary as a portable device rather than
the xed station. Please connect the Power bank for Mobile phone into
the USB port of Stationary.
After that, place the stationary wherever you prefer
Note;
1) Its default setting is "UL".
2) There might be a kind of white noise creation when you set the audio
output at "UH". Hence, it is recommendable to set the audio output at
"UL" except using the device at the heavy noise surround place.