Specifications

AUTOMATIC TRANSAXLE

K41

2. Align the marks, and slide the oil hose onto the oil

pipe until it is fully seated as shown.

Note

• If reusing the hose, install the new hose

clamp exactly on the mark left by the

previous hose camp.Then apply force to the

hose clamp in the direction of the arrow in

order to fit the clamp in the place.

3. Install the new hose clamp onto the hose.

4. Verify that the hose clamp does not interfere with

any other components.

End Of Sie

OIL COOLER DISASSEMBLY/ASSEMBLY

A6E561419900W03

1. Disassemble in the order indicated in the table.

2. Assemble in the reverse order of disassembly.

A6E5614W071

A6E5614W072

1 Mount rubber

2 Radiator outer tank (in tank oil cooler)

(See K42 Radiator Outer Tank (In Tank Oil Cooler)

Removal Note.)

(See K42 Radiator Outer Tank (In Tank Oil Cooler)

Installation Note.)

3 O-ring

4 Washer

5 Drain plug

6 ATF cooler

7Radiator