Specifications

REAR SUSPENSION
R31
R
REAR UPPER ARM REMOVAL/INSTALLATION
A6E741628210W01
Caution
•
••
• Performing the following procedures without first removing the ABS wheel-speed sensor may
possibly cause an open circuit in the harness if it is pulled by mistake. Before performing the
following procedures, remove the ABS wheel-speed sensor (axle side) and fix it to an appropriate
place where the sensor will not be pulled by mistake while servicing the vehicle.
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Inspect the rear wheel alignment.
(See R6 REAR WHEEL ALIGNMENT.)
.
A6E7416W009
1 ABS wheel-speed sensor
2 Parking brake cable
3 Bolt (rear shock absorber lower side)
(See R32 Bolt (Rear Shock Absorber Lower Side)
Removal Note)
4 Bolt (trailing link front side)
5 Bolt (rear upper arm)
(See R32 Bolt (Rear Upper Arm) Removal Note)
6 Rear upper arm
7 Rear upper arm bushing
(See R32 Rear Upper Arm Bushing Removal Note)
(See R32 Rear Upper Arm Bushing Installation
Note)