Specifications

AUDIO AND NAVIGATION SYSTEM
T95
T
5. With the code number displayed, press the
AUTO-M button, then simultaneously press
channel button 6 for approximately 2 seconds.
CODE will be displayed for approximately 5
seconds. After it disappears, the code number is
canceled.
6. If Err (error) appears on the display, repeat the
procedure from Step 4.
Canceling Anti-theft Operation
Properly input the selected code number to deactivate the anti-theft system and resume normal audio operation.
1. Turn the ignition switch to ACC position. (CODE will flash on the display.)
2. First press the AUTO-M button, then
simultaneously press channel button 6 for
approximately 2 seconds until bars appears on
the display.
Note
• Perform Step 3 within 10 seconds after
Step 2.
3. Use channel buttons 14 to input the selected
code number. Press button 1 for the first digit, 2
for the second, 3 for the third, and 4 for the last
digit. Input the number within 10 seconds. If the
display is deleted, repeat the procedure from Step
1.
Caution
•
••
• Three consecutive errors, including
turning the ignition switch to LOCK
position and disconnecting the audio
unit, will activate the anti-theft system
and render the audio unit completely
inoperative.
4. With the code number displayed, press the
AUTO-M button, then simultaneously press
channel button 6 for approximately 2 seconds.
CODE will flash for approximately 5 seconds..
5. If Err (error) appears on the display, repeat the
procedure from Step 1.
End Of Sie
A6E8124W025
A6E8124W026
A6E8124W027
A6E8124W025