A Word to Mazda Owners Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete customer satisfaction in mind. To help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommendations. An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is necessary, that's the place to go. Our nationwide network of Mazda professionals is dedicated to providing you with the best possible service.
How to Use This Manual We want to help you get the most driving pleasure from your vehicle. Your owner's manual, when read from cover to cover, can do that in many ways. NOTE A NOTE provides information and sometimes suggests how to make better use of your vehicle. Illustrations complement the words of the manual to best explain how to enjoy your Mazda. By reading your manual, you can find out about the features, important safety information, and driving under various road conditions.
Table of Contents Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems. Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Before Driving Your Mazda Important information about driving your Mazda. Driving Your Mazda Explanation of instruments and controls.
1 Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Dashboard and Interior Overview .............................................. 1-2 Exterior Overview .........................................................................
Your Vehicle at a Glance Dashboard and Interior Overview The equipment and installation position varies according to model and grade.
Your Vehicle at a Glance Dashboard and Interior Overview Rear seat .............................................................................................................. page 2-9 Front seats ............................................................................................................ page 2-2 Seat belt ............................................................................................................. page 2-16 Air bags .......................................................
Your Vehicle at a Glance Exterior Overview Sedan/5-Door The equipment and installation position varies according to model and grade.
Your Vehicle at a Glance Exterior Overview Doors and keys .................................................................................................... page 3-2 Child safety locks ................................................................................................ page 3-9 Power windows ................................................................................................. page 3-22 Hood ...........................................................................................
Your Vehicle at a Glance Exterior Overview Sport Wagon The equipment and installation position varies according to model and grade.
Your Vehicle at a Glance Exterior Overview Doors and keys .................................................................................................... page 3-2 Child safety locks ................................................................................................ page 3-9 Power windows ................................................................................................. page 3-22 Hood ...........................................................................................
1-8
2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems. Seats ............................................................................................... Front Seats (Manually Operated Seats) ..................................... Front Seats (Electrically Operated Seats) .................................. Rear Seat ...................................................................................
Essential Safety Equipment Seats Front Seats (Manually Operated Seats) WARNING Modification of the Front Seats: Modifying or replacing the front seats such as replacing the upholstery or loosening any bolts is dangerous. The front seats contain air bag components essential to the supplemental restraint system. Such modifications could damage the supplemental restraint system and result in serious injury. Consult an Authorized Mazda Dealer if there is any need to remove or reinstall the front seats.
Essential Safety Equipment Seats Make sure the lever returns to its original position and the seat is locked in place by attempting to push it forward and backward. To change the seatback angle, lean forward slightly while raising the lever. Then lean back to the desired position and release the lever. qSeat Recline WARNING Reclining: Sitting in a reclined position while the vehicle is moving is dangerous because you don't get the full protection from seat belts.
Essential Safety Equipment Seats qHeight Adjustment (Driver's Seat) By moving the seat lever up or down, the seat bottom height can be adjusted. Up Height adjustment To raise a head restraint, pull it up to the desired position. To lower the head restraint, press the stopcatch release, then push the head restraint down. Down qHead Restraint WARNING Head Restraints Adjustment: Driving with the head restraints adjusted too low or removed is dangerous.
Essential Safety Equipment Seats NOTE The thermostat regulates seat temperature by turning the current on and off. Front Seats (Electrically Operated Seats) WARNING Modification of the Front Seats: Modifying or replacing the front seats such as replacing the upholstery or loosening any bolts is dangerous. The front seats contain air bag components essential to the supplemental restraint system. Such modifications could damage the supplemental restraint system and result in serious injury.
Essential Safety Equipment Seats CAUTION l The seat-bottom power adjustment is operated by motors. Avoid extended operation because excessive use can damage the motors. l To prevent the battery from running down, avoid using the power adjustment when the engine is stopped. The adjuster uses a large amount of electric power. l Don't use the switch to make more than one adjustment at a time.
Essential Safety Equipment Seats qHeight Adjustment (Driver's Seat) Front height adjustment Lower the seat-bottom by pressing down on the center of the switch. Release the switch at the desired position. To adjust the front height of the seatbottom, raise or lower the front of the slide lifter switch on the left side of the seat. qLumbar Support Adjustment (Driver's Seat) To adjust the lumbar support, pull the lever forward.
Essential Safety Equipment Seats qHead Restraint WARNING Head Restraints Adjustment: Driving with the head restraints adjusted too low or removed is dangerous. With no support behind your head, your neck could be seriously injured in a collision. Always drive with the head restraints inserted when seats are being used and make sure they are properly adjusted. qSeat Warmer í The front seats are electrically heated. The ignition switch must be in the ON position.
Essential Safety Equipment Seats Rear Seat WARNING Stacking Cargo: Stacking luggage or other cargo higher than the seatbacks, and placing articles on the rear package tray or on the luggage compartment cover is dangerous. During sudden braking or a collision, objects can fly around and become projectiles that may hit and injure passengers. Don't stack cargo higher than the seatbacks or place articles on the rear package tray or on the luggage compartment cover.
Essential Safety Equipment Seats WARNING Children and the Folding Rear Seats: Playing with the folding rear seats is dangerous. Once the seats are back up, a child in the trunk would not be able to get out the way they had entered. If you have small children, keep the seatbacks locked (sedan). Do not give the car keys to children and do not allow them to play in the vehicle. NOTE When returning a rear seat to its original position, also replace the seat belt to its normal position.
Essential Safety Equipment Seats CAUTION Be careful of the following when using the remote handle levers: l On a downward slope, the seatback could flip forward faster than on a flat area. l On an upward slope, the seatback may not fold down. When the seatbacks cannot be folded down with levers, pull the rear seatback forward from inside the vehicle. 1. Unfasten the lap portion of the rear center seat belt (page 2-23).
Essential Safety Equipment Seats qEasy Fold Down Rear Seatbacks and Seat Bottom for Added Luggage Space (5-Door/Sport Wagon) The seatback and seat bottom can be folded down to provide a flat surface extending from the back of the front seats to the rear of the vehicle for extra luggage space. WARNING Folding Seatbacks with Remote Handle Levers: Not checking the rear seat area for persons before folding the seatbacks with the remote handle levers is dangerous.
Essential Safety Equipment Seats CAUTION Always unfasten the lap portion of the belt before folding the rear-left seatback. Leaving the lap portion of the belt fastened could cause damage to the seat belt, buckle and seatback. 2. After checking that the rear seats are clear, open the liftgate and pull the remote handle levers on the left and right side of the liftgate. When using the rear seatback knobs: CAUTION Always unfasten the lap portion of the belt before folding the rear-left seatback.
Essential Safety Equipment Seats WARNING Seat Belts Caught Under Seatbacks: A seat belt caught under a seatback after the seatback is returned to its upright position is dangerous. In a collision or sudden stop, the seat belt cannot provide adequate protection. Always make sure the seat belts are fully pulled out from under the seatbacks. Returning Rear Seatbacks to the Upright Position: A rear seatback not fully returned and locked in the upright position is dangerous.
Essential Safety Equipment Seats qArmrest The armrest can be used or placed upright. WARNING Positioning the Shoulder Belt Over the Armrest: Positioning the shoulder portion of a rear seat belt over the armrest is dangerous as it cannot provide adequate protection in a collision and could result in serious injuries. Never position the shoulder portion of a rear seat belt over the armrest.
Essential Safety Equipment Seat Belt Systems Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use. The driver's seat belt has no provisions for child-restraint systems and has only an emergency locking mode.
Essential Safety Equipment Seat Belt Systems WARNING Not Wearing Seat Belts: Not wearing a seat belt is extremely dangerous. During a collision, occupants not wearing seat belts could hit someone or things inside the vehicle or even be thrown out of the vehicle. They could be seriously injured or even killed. In the same collision, occupants wearing seat belts would be much safer. Always wear your seat belt and make sure all occupants are properly restrained.
Essential Safety Equipment Seat Belt Systems qPregnant Women and Persons with Serious Medical Conditions Pregnant women should wear seat belts. Ask your doctor for specific recommendations. The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS. The shoulder belt should be worn across your shoulder properly, but never across the stomach area. Persons with serious medical conditions also should wear seat belts.
Essential Safety Equipment Seat Belt Systems 3-Point Type Seat Belt NOTE When using the rear center seat belt, refer to “Rear Center Position Seat Belt” (page 2-23). qFastening the Seat Belts 1. Grasp the buckle and tongue. WARNING Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous.
Essential Safety Equipment Seat Belt Systems qUnfastening the Seat Belts Depress the button on the buckle. WARNING Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous. Always make sure the shoulder portion of the seat belt is positioned across your shoulder and near your neck, but never under your arm, on your neck, or on your upper arm. NOTE If a belt does not fully retract, inspect it for kinks and twists.
Essential Safety Equipment Seat Belt Systems Front Seat Belt Pretensioner and Load Limiting Systems For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. In moderate or greater frontal or nearfrontal accidents, the front air bag and pretensioner systems deploy simultaneously. The pretensioners take up slack in the front seat belts as the air bags are expanding.
Essential Safety Equipment Seat Belt Systems WARNING Pretensioner System Disposal: Improper disposal of the pretensioner system or a vehicle with nondeactivated pretensioners is dangerous. Unless all safety procedures are followed, injury could result. Ask an Authorized Mazda Dealer how to safely dispose of the pretensioner system or how to scrap a pretensioner-equipped vehicle. NOTE l l The pretensioner system will only activate in a moderate or greater frontal or near-frontal collision.
Essential Safety Equipment Seat Belt Systems Rear Center Position Seat Belt Before using the rear-center lap/shoulder belt make sure tongue (A) and anchor buckle (B) are fastened. (A) (B) qFastening the Seat Belt 1. Grasp the buckle (D) and tongue (C). 2. Slowly pull out the lap/shoulder belt. 3. Insert the tongue (C) into the buckle (D) until you hear a click. WARNING Fastening the Rear-Center Seat Belt with Only One Buckle: Fastening the rear-center seat belt with only one buckle is dangerous.
Essential Safety Equipment Seat Belt Systems qUnfastening the Seat Belt Depress the button on the buckle. NOTE To encourage rear seat passengers to wear their seat belts, we suggest leaving the rear center lap position of the belt fastened at all times except when folding the rear seat forward. qFastening the Lap Portion of the Seat Belt Grasp tongue (A) and insert it into the anchor buckle (B) until you hear a click. It is now secure for passenger use.
Essential Safety Equipment Seat Belt Systems To pull out the seat belt, slide tongue (A) with your finger while moving it downward, and slowly pull out the seat belt from the ceiling recess. CAUTION When stowing the seat belt, make sure the belt is locked securely into the ceiling recess. If the seat belt is not locked securely, it could fall down suddenly and cause injury.
Essential Safety Equipment Seat Belt Systems WARNING Using an Extender That is Too Long: Using an extender that is too long is dangerous. The seat belt will not fit properly. In an accident, the seat belt will not provide adequate protection and you could be seriously injured. Don't use the extender or choose one shorter in length if the distance between the extender's buckle and the center of the user's body is less than 15cm (6 in).
Essential Safety Equipment Seat Belt Systems qBelt Minder NOTE The belt minder is a supplemental warning to the seat belt warning function. This feature provides additional reminders to the driver that the driver's seat belt is not fastened by intermittently sounding a beep sound and flashing the seat belt warning light in the instrument cluster.
Essential Safety Equipment Child Restraint Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children small enough to use them. You are required by law to use a child-restraint system for children in the U.S. and Canada. Check your local and state or provincial laws for specific requirements regarding the safety of children riding in your vehicle.
Essential Safety Equipment Child Restraint WARNING Proper Size of Child-Restraint System: For effective protection in vehicle accidents and sudden stops, a child must be properly restrained using a seat belt or child-restraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident. Follow the Manufacturer's Instructions and Always Keep the Child-Restraint System Buckled Down: An unsecured child-restraint system is dangerous.
Essential Safety Equipment Child Restraint WARNING Seating Children in a Child-Restraint System on the Front Passenger Seat: If your vehicle is equipped with front passenger seat weight sensors, a front passenger air bag deactivation indicator light is also equipped (page 2-37).
Essential Safety Equipment Child Restraint WARNING One Belt, One Passenger: Using one seat belt for more than one person at a time is dangerous. A seat belt used in this way can't spread the impact forces properly and the two passengers could be crushed together and seriously injured or even killed. Never use one belt for more than one person at a time.
Essential Safety Equipment Child Restraint Installing Child-Restraint Systems Accident statistics reveal that a child is safer in the rear seat. The front passenger's seat is clearly the worst choice for any child under 12, and with rear-facing childrestraint systems it is clearly unsafe due to air bags. Some child-restraint systems now come with tethers and therefore must be installed on the seats that take tethers to be effective.
Essential Safety Equipment Child Restraint 3. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor. NOTE Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode.
Essential Safety Equipment Child Restraint Anchor bracket location (5-Door/Sport Wagon) WARNING Child-Restraint Tether Usage: Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a child-restraint system. Tether strap position (5-Door/Sport Wagon) Route between head restraint upright.
Essential Safety Equipment Child Restraint Tether strap position (Sedan) WARNING Tether strap Anchor bracket Tether strap position (5-Door) Anchor bracket Tether strap Tether strap position (Sport Wagon) Tether strap Anchor bracket Child-Restraint Tether Usage: Child-restraint system anchorages are designed to withstand only those loads imposed by correctly installed childrestraint systems.
Essential Safety Equipment Child Restraint qIf You Must Use the Front Seat for Children If you cannot put all children in the rear seat, at least put the smallest children in the rear and be sure the largest child up front uses the shoulder belt over the shoulder. Do not put rear-facing child-restraint systems on the front passenger's seat. This seat is also not set up for tethered child-restraint systems, put them in one of the rear seat positions set up with tether anchors.
Essential Safety Equipment Child Restraint WARNING Children and Seating Position with Side and Curtain Air Bags: Allowing anyone to lean over or against the front door, the area of the front seat, front and rear window pillars and the roof edge along both sides from which the side and curtain air bags deploy, even though using a child-restraint system, is dangerous. If the vehicle is equipped with side and curtain air bags, the impact of inflation could cause serious injury or death to the child.
Essential Safety Equipment Child Restraint 5. Make sure the front passenger air bag deactivation indicator light illuminates after installing a child-restraint system on the front passenger seat.
Essential Safety Equipment Child Restraint LATCH Child-Restraint Systems Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise the seat will bounce around and put the child in danger. Some LATCH child-restraint systems must also be used in conjunction with a tether to be effective. If they have a tether you must use it to better assure your child's safety.
Essential Safety Equipment Child Restraint qLATCH Child-Restraint System Installation Procedure (Rear Outboard Seats) Anchor bracket location (Sedan) 1. Make sure the seatback is securely latched by pushing it back until it is fully locked. 2. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors.
Essential Safety Equipment Child Restraint Tether strap position (5-Door/Sport Wagon) Route between head restraint upright. Tether strap WARNING Child-Restraint Tether Usage: Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a child-restraint system.
Essential Safety Equipment Child Restraint 2. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors. Anchor bracket location (Sedan) Tether strap position (Sedan) Tether strap NOTE The markings above the LATCH lower anchors indicate the locations of LATCH lower anchors for the attachment of a child-restraint system. 3.
Essential Safety Equipment Child Restraint Anchor bracket location and tether strap position (Sport Wagon) Tether strap Anchor bracket WARNING Child-Restraint Tether Usage: Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a child-restraint system.
Essential Safety Equipment SRS Air Bags Supplemental Restraint Systems (SRS) Precautions The front and side supplemental restraint systems (SRS) include up to 6 air bags (verify “SRS AIRBAG” location indicator marks).
Essential Safety Equipment SRS Air Bags WARNING Air Bags without Seat Belts: Depending only on the air bags for protection during an accident is dangerous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only in collisions with frontal, near frontal or side forces that are at least moderate. Vehicle occupants should always wear seat belts. Child in the Front Seat: Placing a child, 12 years or under, in the front seat is dangerous.
Essential Safety Equipment SRS Air Bags WARNING Seating Position with Side and Curtain Air Bags: Sitting too close to the side air bag modules or placing hands on them is extremely dangerous. The side air bags inflate with great force and speed directly out of the outboard side of the front seat and expand along the front door on the side the car is hit.
Essential Safety Equipment SRS Air Bags WARNING Hot Air Bag Inflators: Hot air bag inflators are dangerous. Immediately after inflation, the inflators in the steering wheel, dashboard, seatbacks, or the front and rear window pillars and along the roof edge are very hot. You could get burned. Don't touch the internal components of the air bag modules after the bags have inflated.
Essential Safety Equipment SRS Air Bags NOTE l When an air bag deploys, a loud inflation noise can be heard and some smoke will be released. Neither is likely to cause injury, however, the texture of the air bags may cause light skin injuries on body parts not covered with clothing through friction. l Should you sell your Mazda, we urge you to tell the new owner of its air bag systems and that familiarization with all instructions about them, from the Owner's Manual, is important.
Essential Safety Equipment SRS Air Bags Supplemental Restraint System Components The supplemental restraint systems (SRS) have two basic subsystems: l The air bag system with inflators and air bags. l The electrical system with crash sensors and diagnostic module.
Essential Safety Equipment SRS Air Bags qFront Air Bag System Components (6) (1) (3) (4) (8) (7) (9) (2) (5) (8) (1) Front dual stage inflators and air bags (2) Crash sensors and diagnostic module (SAS unit) (3) Front air bag sensor (4) Driver seat slide position sensor (page 2-52) (5) Front passenger seat weight sensors (page 2-52) (6) Front seats (7) Driver and front passenger seat belt buckle switches (page 2-52) (8) Front seat belt pretensioner and load limiting systems (page 2-21) (9) Front pas
Essential Safety Equipment SRS Air Bags qSide and Curtain Air Bag System Components í Put children in the rear seats, they do not have side air bag systems. Sedan/5-Door (4) (1) (2) (1) (3) (4) Sport Wagon (1) (1) (3) (2) (1) Inflators and air bags (2) Side crash sensor (3) Crash sensors and diagnostic module (SAS unit) (4) Front seats í Some models.
Essential Safety Equipment SRS Air Bags How the Air Bags Work qHow the Front Air Bags Work When air bag crash sensors detect a frontal impact of greater than moderate force, an electrical current is sent to the inflators. Gases are produced to inflate the front air bags and after the inflation, the front air bags quickly deflate. The front air bags will function only once. After that, the front air bags will not work again and must be replaced.
Essential Safety Equipment SRS Air Bags Front passenger seat weight sensors If your vehicle is equipped with front passenger seat weight sensors, a front passenger air bag deactivation indicator light is also equipped (page 2-37). These sensors are located under both of the front passenger seat rails. These sensors determine the total seated weight on the front passenger seat.
Essential Safety Equipment SRS Air Bags The front passenger air bag deactivation indicator light illuminates or is off under the following conditions: Total seated weight on the Front passenger air bag Front passenger front and Seat belt pretensioner front passenger seat deactivation indicator light side air bags system OFF OFF OFF Empty (Not occupied)* Less than approx. 30 kg ON OFF OFF (66 lb) Approx.
Essential Safety Equipment SRS Air Bags WARNING Increasing the Total Seated Weight on the Front Passenger Seat: When an infant or small child sits on the front passenger seat, increasing the total seated weight on the front passenger seat from the total seated weight of approximately 30 kg (66 lb) is dangerous.
Essential Safety Equipment SRS Air Bags NOTE l The system requires about 10 seconds to alternate between turning the front passenger front and side air bags and seat belt pretensioner system on or off. l The front passenger air bag deactivation indicator light may illuminate repeatedly if luggage or other items are put on the front passenger seat, or if the temperature of the vehicle's interior changes suddenly.
Essential Safety Equipment SRS Air Bags CAUTION To prevent damage to the side and curtain air bag wiring, don't place luggage or other objects under the front seats. qAir Bag Activation/Deactivation CAUTION If the front passenger seat weight sensors detect a total seated weight on the front passenger seat of less than approximately 42 kg (93 lb), the front passenger front and side air bags and seat belt pretensioner may not inflate (page 2-52).
Essential Safety Equipment SRS Air Bags Limitations to front air bag activation Depending on the severity of impact, the front air bags may not inflate in the following cases: l l l Non-activation of front air bags Front air bags will not normally inflate in the following cases: l Collision from the rear. l Impact to the side, but it may deploy the side and curtain air bags. l Vehicle roll-over, may deploy the side and curtain air bags but not the front air bags.
Essential Safety Equipment SRS Air Bags Side and curtain air bag activation í Greater than moderate impact to one side of the vehicle (driver or passenger side areas) will cause the side and curtain air bags to inflate, but it will not normally deploy the front air bags. l Vehicle roll-over may not provide enough side force to deploy the side and curtain air bags. l Side impacts with two-wheeled vehicles may not provide enough force to deploy the side and curtain air bags.
Essential Safety Equipment SRS Air Bags qConstant Monitoring The following components of the air bag systems are monitored by a diagnostic system: l SAS unit l Front air bag sensor l Air bag modules l Side crash sensor í l Front seat belt pretensioners l Related wiring l Driver seat slide position sensor l Front passenger seat weight sensors l Driver and front passenger seat belt buckle switches The diagnostic module continuously monitors the system's readiness.
Essential Safety Equipment SRS Air Bags l Front passenger air bag deactivation indicator light does not illuminate when the ignition switch is turned to the ON position or does not illuminate as indicated in the chart. For more details about this indicator light and this chart, refer to “Front passenger seat weight sensors (page 2-52)”. WARNING Damaged Air Bag System Components: Driving with damaged air bag system components is dangerous.
2-62
3 Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Doors and Locks ........................................................................... 3-2 Keys .......................................................................................... 3-2 Keyless Entry System ............................................................... 3-3 Door Locks ...............................................................................
Knowing Your Mazda Doors and Locks Here's what the keys are used for: Keys WARNING Keys and Children: Leaving children in a vehicle with the key is dangerous. This could result in someone being badly injured or even killed. They could play with power windows or other controls, or even make the vehicle move. Don't leave the keys in your vehicle with children and keep them in a place where your children will not find or play with them.
Knowing Your Mazda Doors and Locks Keyless Entry System This system locks and unlocks the doors and the hatch/liftgate, and opens the trunk. It can also help you signal for attention in an emergency. Press the button slowly and accurately. qTransmitter Sedan Panic button Lock button Unlock button CAUTION To avoid damage to the transmitter, do not: l Drop it. l Get it wet. l Disassemble it. l Expose it to heat or sunlight.
Knowing Your Mazda Doors and Locks NOTE l l (U.S.A.) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (CANADA) This device complies with RSS-210 of Industry CANADA.
Knowing Your Mazda Doors and Locks Panic button You can use the panic button to turn on the alarm, which allows you to signal for attention in an emergency. qTransmitter Maintenance CAUTION l Make sure the battery is installed with the correct pole facing upward. Battery leakage could occur if it is not installed correctly. l When replacing the battery, be careful not to bend the electrical terminals or get oil on them. Also be careful not to get dirt in the transmitter as it could be damaged.
Knowing Your Mazda Doors and Locks Replacing the transmitter battery 1. Insert a small screwdriver into the slot and gently pry open the transmitter. 3. Install a new battery (CR2025 or equivalent) into the front portion of the holder with the positive pole ( ) facing up. Press on the B portion of the battery to set the battery. Slot Back cover Back cover B Front cover 2. Press the portion of the battery indicated by A and remove the battery. Front of holder 4.
Knowing Your Mazda Doors and Locks Door Locks WARNING Unattended Children and Pets: Leaving a child or an animal unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death. Always take all children and animals with you or leave a responsible person with them. qLocking, Unlocking with Key The driver's door can be locked/unlocked with the key. Turn the key toward the front to unlock, toward the back to lock.
Knowing Your Mazda Doors and Locks qLocking, Unlocking with DoorLock Knob To lock any door from the inside, push the door-lock knob. To unlock, pull it out. This does not operate the other door locks. Lock NOTE l Lockout prevention keeps you from locking the driver's door with the key in the ignition switch at ACC or LOCK. If you try to lock the driver's door when the key is in the ignition switch and any door is open, the door lock immediately unlocks.
Knowing Your Mazda Doors and Locks qRear Door Child Safety Locks NOTE Holding the key in the unlocked position in the driver's door lock for about a second unlocks all doors and the hatch/liftgate. To unlock only the driver's door, insert the key into the driver's door lock and turn the key briefly to the unlock position and then immediately return it to the center position. Locking, unlocking with door-lock switch All doors and the hatch/liftgate lock automatically when LOCK is pushed.
Knowing Your Mazda Doors and Locks Hatch (5-Door) qOpening and Closing the Hatch To open the hatch, pull up on the handle. WARNING Open Hatch and Exhaust Gas: Exhaust gas in the cabin of a vehicle is dangerous. This gas contains CO (carbon monoxide), which is colorless, odorless, and highly poisonous. If inhaled, it can cause loss of consciousness and death. Because exhaust gas can get into the cabin through an open hatch, keep the hatch closed when driving.
Knowing Your Mazda Doors and Locks qLuggage Strap NOTE If the vehicle battery is dead or there is a malfunction in the electrical system and the hatch cannot be unlocked, perform the following manual procedure as an emergency measure to unlock it: The luggage compartment can be accessed by opening the hatch when the straps are attached to the sides of the hatch. 1. Remove the cap on the interior surface of the hatch with a flathead screwdriver. Strap Cap qLuggage Compartment Cover WARNING 2.
Knowing Your Mazda Doors and Locks This cover can be removed for more room. To do this, just unfasten the straps; then lift and pull it out. Liftgate (Sport Wagon) WARNING Open Liftgate and Exhaust Gas: Exhaust gas in the cabin of a vehicle is dangerous. An open liftgate in a moving vehicle will cause exhaust gas to be drawn into the cabin. This gas contains CO (carbon monoxide), which is colorless, odorless, and highly poisonous, and it can cause loss of consciousness and death.
Knowing Your Mazda Doors and Locks qOpening and Closing the Liftgate Opening the liftgate Pull up on the handle. NOTE If the vehicle battery is dead or there is a malfunction in the electrical system and the liftgate cannot be unlocked, perform the following manual procedure as an emergency measure to unlock it: 1. Remove the cap on the interior surface of the liftgate with a flathead screwdriver. Cap 2. Turn the lever to the right to unlock the liftgate.
Knowing Your Mazda Doors and Locks qLuggage Compartment Cover Use the luggage compartment cover to conceal cargo or luggage. 2. Set the right side of the retainer bar onto the retainer loop on the right side of the luggage compartment. WARNING Placing Cargo on the Cover: Placing luggage or other cargo on top of the luggage compartment cover is dangerous. During sudden braking or a collision, the cargo could become a projectile that could hit and injure someone. Don't place anything on top of the cover.
Knowing Your Mazda Doors and Locks qLuggage Compartment Net NOTE To fully retract and protect the cover, guide the cover all the way into the retainer. The luggage compartment net can be used as a compartment separator or to keep animals in the back. CAUTION Tab Make sure the net is firmly secured. If it is not firmly secured, it could unexpectedly disengage resulting in injury. NOTE The width of the net anchors can be shortened by pushing both sides inward. 2.
Knowing Your Mazda Doors and Locks Dividing the luggage compartment from the rear seat WARNING Using the Luggage Compartment Net to Secure Cargo: Using the luggage compartment net to secure objects in the luggage compartment or the rear seat area is dangerous. The luggage compartment net is not designed to hold objects in place that could fly forward in a frontal collision. Unsecured objects that are thrown around the inside of the vehicle could cause injury to occupants.
Knowing Your Mazda Doors and Locks Dividing the luggage compartment from the front seats 3. Insert the retainer bar anchors into the left side of each rear seatback retainer (back of the seatback). Retainer bar WARNING Using the Luggage Compartment Net to Secure Cargo: Using the luggage compartment net to secure objects in the luggage compartment or the rear seat area is dangerous. The luggage compartment net is not designed to hold objects in place that could fly forward in a frontal collision.
Knowing Your Mazda Doors and Locks 5. Slowly pull out the net in the upward direction, insert the left and right net anchors into the ceiling retainers, and slide them to the position indicated in the figure. Net anchor Net To remove the net: 1. Lift the net slightly and disengage the net anchors from the ceiling retainers. 2. Slowly lower and support the net as it rolls up into the retainer bar. 3. Remove the retainer bar in the reverse order of installation.
Knowing Your Mazda Doors and Locks qOpening and Closing the Trunk WARNING Open Trunk Lid and Children: Leaving the trunk lid open or leaving children in the vehicle with the keys is dangerous. Children could open the trunk lid and climb inside resulting in possible injury or death from heat exposure. Close the trunk lid, lock the rear seatbacks and do not allow children to play inside the vehicle. Unattended Children and Pets: Leaving children or animals unattended in a parked vehicle is dangerous.
Knowing Your Mazda Doors and Locks Closing the trunk lid Use both hands to push the trunk lid down until the lock snaps shut. Do not slam it. Pull up on the trunk lid to make sure it is secure. qTrunk Light The trunk light is on when the lid is open and off when it's closed. qRemote Trunk Lid Release LockOut As an added security feature, the remote release may be canceled to prevent anyone from opening the trunk without the master key.
Knowing Your Mazda Doors and Locks Inside Trunk Release Slide Lever (Sedan) Your vehicle is equipped with an inside trunk release slide lever that provides a means of escape for children and adults in the event they become locked inside the trunk. No matter how careful adults might be with keys and locking their cars, parents should be aware that children may be tempted to play around vehicles and use the trunk as a hiding place.
Knowing Your Mazda Doors and Locks qOpening the Trunk Lid from the Inside Slide the illuminated inside trunk release slide lever in the direction of the arrow. The lever is made of material that will glow for hours in the darkness of the trunk following a brief exposure to ambient light. The inside trunk release slide lever is located on the inside of the trunk lid. Power Windows The ignition switch must be in the ON position for the power windows to operate.
Knowing Your Mazda Doors and Locks qOperating the Driver's Side Power Window qOperating the Passenger Power Windows Manual opening/closing The power windows may be operated when the power window lock switch on the driver's door is in the unlocked position. To open the window to the desired position, lightly hold down the switch. To close the window to the desired position, lightly pull up the switch.
Knowing Your Mazda Doors and Locks Engine-off power window operation The power window can be operated about 40 seconds after the ignition switch is turned from the ON position to the ACC, LOCK position or key out of ignition with all doors closed. If any front door is opened, the power window will be inoperable. qPower Window Lock Switch With the lock switch in the unlocked position, all power windows on each door can be operated.
Knowing Your Mazda Doors and Locks qFuel-Filler Lid To open, pull up the remote fuel-filler lid release. Remote fuel-filler lid release CAUTION Make sure the fuel-filler cap is tightened securely. The check engine light may illuminate on when the cap isn't tightened securely. If the light remains on (even after you have tightened the cap securely, driven, and restarted the engine several times), it may indicate a different problem. Contact an Authorized Mazda Dealer as soon as possible.
Knowing Your Mazda Doors and Locks Hood 2. Slide the hood latch to the right and lift the hood. WARNING Closed and Securely Locked Hood: A hood that is not closed and securely locked is dangerous as it could fly open while the vehicle is moving and block the driver's vision which could result in a serious accident. Always check that the hood is closed and securely locked. qOpening the Hood 3. Use the support rod to hold the hood open. 1.
Knowing Your Mazda Doors and Locks Moonroof í The moonroof can be opened or closed electrically only when the ignition switch is in the ON position. NOTE After washing your Mazda or after a rain, wipe the water off the moonroof before operating it to avoid water penetration which could cause rust and water damage to your headliner. Slide switch qTilt Operation The rear of the moonroof can be tilted open to provide more ventilation. To tilt, push the rear of the tilt switch.
Knowing Your Mazda Doors and Locks qSlide Operation To open to any position, press the rear of the slide switch. To close, press the front of the slide switch. Open Close qSunshade The sunshade can be opened and closed by hand. The sunshade opens automatically when the moonroof is opened, but must be closed by hand. Sunshade 3-28 CAUTION The sunshade doesn't tilt. To avoid damaging the sunshade, don't push up on it.
Knowing Your Mazda Security System Immobilizer System The immobilizer system allows the engine to start only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent the theft of your vehicle. CAUTION When starting the engine do not allow the following, as the engine may not start due to the electronic signal from the ignition key not being transmitted correctly. l A key ring rests on the key grip.
Knowing Your Mazda Security System NOTE l l (U.S.A.) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (CANADA) This device complies with RSS-210 of Industry CANADA.
Knowing Your Mazda Security System NOTE l If the security indicator light comes on and stays on when the ignition switch is turned to the ON position, the engine will not start. l Signals from a TV or radio station, or from a transceiver or a mobile telephone, could interfere with your immobilizer system. If you are using the proper key and your engine fails to start, check the security indicator light.
Knowing Your Mazda Security System Theft-Deterrent System í The optional theft-deterrent system is designed to prevent your vehicle or its contents from being stolen when all the doors, hood, and trunk lid/liftgate/hatch are locked. If forcible entry is attempted, the system sounds the horn and flashes the hazard warning lights. NOTE l The theft-deterrent system operates with the key or the keyless entry system transmitter. l The system will not function unless it is properly armed.
Knowing Your Mazda Security System NOTE The trunk lid can be opened with the key or the transmitter even when the system is armed. The alarm will not come on and the system will remain armed. Mazda recommends that you affix them to the lower rear corner of the front door windows. qTo Stop an Alarm A triggered alarm can be turned off by any one of the following methods: l Unlock a door with the key. l Open the trunk lid with the key.
Knowing Your Mazda Steering Wheel and Mirrors Steering Wheel WARNING Adjusting the Steering Wheel: Adjusting the steering wheel while the vehicle is moving is dangerous. Moving it can very easily cause the driver to abruptly turn to the left or right. This can lead to loss of control or an accident. Never adjust the steering wheel while the vehicle is moving. qSteering Wheel Adjustment To change the angle or length of the steering wheel: 1.
Knowing Your Mazda Steering Wheel and Mirrors After adjusting the mirror, lock the control by placing the selector switch in the middle position. Mirror defroster í To turn on the mirror defrosters, turn the ignition switch to the ON position and push the rear window defroster switch (page 5-42). Reducing glare from headlights Manual day/night mirror Push the day/night lever forward for day driving. Pull it back to reduce glare of headlights from cars at the rear.
Knowing Your Mazda Steering Wheel and Mirrors NOTE l Do not use glass cleaner or suspend objects on or around the light sensor. Otherwise, light sensor sensitivity will be affected and may not operate normally. Light sensor Light sensor l For information regarding the 3 buttons ( , , ) on the autodimming mirror, refer to HomeLink Wireless Control System (page 5-44).
4 Before Driving Your Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ........................................ Fuel Requirements .................................................................... Emission Control System .......................................................... Engine Exhaust (Carbon Monoxide) ......................................... 4-2 4-2 4-3 4-5 Before Starting the Engine ...........................................................
Before Driving Your Mazda Fuel and Engine Exhaust Precautions Fuel Requirements Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Your Mazda will perform best with fuel listed in the table. Fuel Regular unleaded fuel Octane Rating*(Anti-knock index) 87 [ (R+M)/2 method] or above (91 RON or above) * U.S. federal law requires that octane ratings be posted on gasoline station pumps.
Before Driving Your Mazda Fuel and Engine Exhaust Precautions Emission Control System Your vehicle is equipped with an emission control system (the catalytic converter is part of this system) that enables your vehicle to comply with existing exhaust emissions requirements. WARNING Parking Over Flammable Objects: Parking over or near anything flammable, such as dry grass, is dangerous.
Before Driving Your Mazda Fuel and Engine Exhaust Precautions NOTE After driving some distance and turning off the engine, the sound of a valve opening and closing can be heard at the rear of the vehicle, however this does not indicate an abnormality. Your vehicle has a self-checking device and it operates after turning off the engine.
Before Driving Your Mazda Fuel and Engine Exhaust Precautions Engine Exhaust (Carbon Monoxide) WARNING Carbon Monoxide: Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness and death. If you smell exhaust gas inside your vehicle, keep all windows fully open and contact an Authorized Mazda Dealer immediately.
Before Driving Your Mazda Before Starting the Engine Before Getting In l Be sure the windows, outside mirrors, and outside lights are clean. After Getting In l Are all doors closed and locked? l Is the seat adjusted properly? l Inspect inflation pressures and condition of tires. l Are the inside and outside mirrors adjusted? l Look under the vehicle for any sign of a leak. l Is everyone's seat belt fastened? l Check all gauges.
Before Driving Your Mazda Driving Tips Break-In Period Money-Saving Suggestions No special break-in is necessary, but a few precautions in the first 1,000 km (600 miles) may add to the performance, economy, and life of your Mazda. How you operate your Mazda determines how far it will travel on a tank of fuel. Use these suggestions to help save money on fuel and repairs. l Don't race the engine. l l Don't maintain one constant speed, either slow or fast, for a long period of time.
Before Driving Your Mazda Driving Tips Hazardous Driving WARNING Downshifting on Slippery Surfaces: Downshifting into lower gear while driving on slippery surfaces is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident. If it is necessary to downshift on slippery surfaces, be very careful. When driving in water, mud, sand, or similar hazard: l Be cautious and allow extra distance for braking.
Before Driving Your Mazda Driving Tips Winter Driving l Carry emergency gear, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt. Ask an Authorized Mazda Dealer to perform the following precautions: l Have the proper ratio of antifreeze in the radiator. l Inspect the battery and its cables. Cold reduces battery capacity. l Inspect the ignition system for damage and loose connections.
Before Driving Your Mazda Driving Tips Driving In Flooded Area WARNING Driving with Wet Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected. Dry the brakes by driving very slowly and applying the brakes lightly until brake performance returns to normal. CAUTION Make sure water does not enter the vehicle interior or the engine area.
Before Driving Your Mazda Towing Trailer Towing Never tow a trailer with your Mazda.
4-12
5 Driving Your Mazda Explanation of instruments and controls. Starting and Driving ..................................................................... 5-2 Ignition Switch .......................................................................... 5-2 Starting the Engine .................................................................... 5-3 Brake System ............................................................................ 5-4 Manual Transaxle Operation ............................................
Driving Your Mazda Starting and Driving Ignition Switch qIgnition Switch Positions Automatic transaxle To turn the key from the ACC to the LOCK position, the shift lever must be in the P position. Shift lever engaged in P (park) LOCK The steering wheel locks to protect against theft. Only in this position can the key be removed. Manual transaxle To turn the key from the ACC to the LOCK position, push the key in at the ACC position, then turn it to the LOCK position.
Driving Your Mazda Starting and Driving NOTE If turning the key is difficult, jiggle the steering wheel from side to side. ACC (Accessory) The steering wheel unlocks and some electrical accessories will operate. ON This is the normal running position after the engine is started. The warning lights (except brakes) should be inspected before the engine is started (page 5-27). Starting the Engine NOTE Engine-starting is controlled by the spark ignition system.
Driving Your Mazda Starting and Driving CAUTION Don't try the starter for more than 10 seconds at a time. If the engine stalls or fails to start, wait 10 seconds before trying again. Otherwise, you may damage the starter and drain the battery. 6. After starting the engine, let it idle for about 10 seconds. Brake System qFoot Brake Your Mazda has power-assisted brakes that adjust automatically through normal use.
Driving Your Mazda Starting and Driving WARNING Driving with Wet Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected. Dry the brakes by driving very slowly and applying the brakes lightly until brake performance is normal. Setting the parking brake Depress the brake pedal, then pull the brake handle fully upward.
Driving Your Mazda Starting and Driving qBrake System Warning Light Even if the light goes off, have your brake system inspected as soon as possible. Electronic brake force distribution system warning This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the ignition switch in the START or ON position. It goes off when the parking brake is fully released.
Driving Your Mazda Starting and Driving qAnti-Lock Brake System (ABS) í qABS Warning Light í The ABS control unit continuously monitors the speed of each wheel. If one is about to lock up, the ABS responds by automatically releasing and reapplying that wheel's brake. The driver will feel a slight vibration in the brake pedal and may hear a chattering noise from the brake system. This is normal when the ABS operates. Don't pump the brakes, continue to press down on the brake pedal.
Driving Your Mazda Starting and Driving NOTE When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light comes on. This is due to a weak battery, not a malfunction. Recharge the battery. Manual Transaxle Operation qManual Transaxle Shift Pattern qBrake Pad Wear Indicator When the disc brake pads become worn, the built-in wear indicators contact the disc plates. This causes a screeching noise to warn that the pads should be replaced.
Driving Your Mazda Starting and Driving CAUTION l l Keep your foot off the clutch pedal except when shifting gears. Also, don't use the clutch to hold the vehicle on an upgrade. Riding the clutch will cause needless clutch wear and damage. Make sure the vehicle comes to a complete stop before shifting to R. Shifting to R while the vehicle is still moving may damage the transaxle. NOTE If shifting to R is difficult, shift back into neutral, release the clutch pedal, and try again.
Driving Your Mazda Starting and Driving Automatic Transaxle Controls Various Lockouts: Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ACC or ON position). Indicates the shift lever can be shifted freely into any position. qTransaxle Ranges The shift lever must be in P or N to operate the starter. P (Park) P locks the transaxle and prevents the front wheels from rotating.
Driving Your Mazda Starting and Driving N (Neutral) In N, the wheels and transaxle are not locked. The vehicle will roll freely even on the slightest incline unless the parking brake or brakes are on. WARNING Shifting from N or P: It's dangerous to shift from N or P into a driving gear when the engine is running faster than idle. If this is done, the vehicle could move suddenly, causing an accident or serious injury. If the engine is running faster than idle, don't shift from N or P into a driving gear.
Driving Your Mazda Starting and Driving qManual Shift Mode This mode gives you the feel of driving a manual transaxle vehicle by operating the shift lever and allows you to control engine rpm and torque to the front wheels much like a manual transaxle when more control is desired. To change to manual shift mode, shift the lever from D to M. Gear position indicator The numeral for the selected gear illuminates.
Driving Your Mazda Starting and Driving NOTE l WARNING When driving slowly, the gears may not shift up depending on vehicle speed. l In manual shift mode, gears do not shift up automatically. Don't run the engine with the tachometer needle in the RED ZONE. If the tachometer needle enters the RED ZONE, you may feel engine-braking because the fuel delivery will be stopped to protect the engine. However, this does not indicate an abnormality.
Driving Your Mazda Starting and Driving Shifting down Shifting down If the vehicle speed is higher than the speed specified for each gear, the gear cannot be shifted down to a lower gear. If the vehicle speed is higher than the speed specified for each gear, the gear cannot be shifted down to a lower gear.
Driving Your Mazda Starting and Driving If the vehicle is kicked down at the following speeds or lower, the gears shift down automatically: Gear M6→M5 M6→M4 M5→M4 M5→M3 M4→M3 M4→M2 M3→M2 Vehicle speed 212 km/h (131 mph) 161 km/h (100 mph) 161 km/h (100 mph) 70 km/h (44 mph) 70 km/h (44 mph) 46 km/h (28 mph) 46 km/h (28 mph) qDriving Tips Passing For extra power when passing another vehicle or climbing steep grades, depress the accelerator fully.
Driving Your Mazda Starting and Driving Power Steering Cruise Control Power steering is only operable when the engine is running. If the engine is off or if the power steering system is inoperable, you can still steer, but it requires more physical effort. With cruise control, you can set and automatically maintain any speed of more than about 30 km/h (19 mph). If the steering feels rigid during normal driving, consult an Authorized Mazda Dealer.
Driving Your Mazda Starting and Driving qCruise Set Indicator Light This light comes on when a cruising speed is set. qActivation/Deactivation To activate the system, press the ON/OFF switch. The cruise main indicator light illuminates. To deactivate the system, press the switch again. The cruise main indicator light turns off. WARNING Cruise Main Switch: Leaving the ON/OFF switch on when not using the cruise control is dangerous as it may be switched on accidentally.
Driving Your Mazda Starting and Driving NOTE l The SET function can't be activated until about 2 seconds after the ON/ OFF switch has been engaged. l On a steep grade, the vehicle may momentarily slow down going up or speed up while going down. qTo Increase Cruising Speed Your vehicle has a tap-up feature that allows you to increase your current speed in increments of 1.6 km/h (1 mph) by a momentary tap of the RES/ACCEL button. Multiple taps will increase your vehicle speed 1.
Driving Your Mazda Starting and Driving qTo Decrease Cruising Speed Press the SET/COAST button and hold it. The vehicle will gradually slow. Release the button at the speed you want. qTo Resume Cruising Speed at More Than 30 km/h (19 mph) If some other method besides the ON/ OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when the RES/ACCEL button is pressed.
Driving Your Mazda Starting and Driving l Press the CANCEL button. Traction Control System (TCS) í The Traction Control System (TCS) enhances traction and safety by controlling engine torque. When the TCS detects driving wheel slippage, it lowers engine torque to prevent loss of traction. The system is off when the ignition is off. NOTE Cruise control will cancel at about 15 km/h (9 mph) below the preset speed or below 30 km/h (19 mph).
Driving Your Mazda Starting and Driving qTCS Indicator Light If the light stays on when the TCS is not switched off, take your vehicle to an Authorized Mazda Dealer. The TCS may have a malfunction. NOTE This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. If the TCS is operating, the indicator light flashes. If the light stays on, the TCS may have a malfunction and it may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.
Driving Your Mazda Starting and Driving NOTE l When TCS is on and you attempt to free the vehicle when it is stuck, or drive it out of freshly fallen snow, the TCS will activate. Depressing the accelerator will not increase engine power and freeing the vehicle may be difficult. When this happens, turn off the TCS. l If the TCS is off when the engine is turned off, it automatically activates when the ignition switch is turned on. l Leaving the TCS on will provide the best traction.
Driving Your Mazda Instrument Cluster and Indicators Meters and Gauges (Black-out meter) When the ignition switch is in the ON position, the dashboard gauges illuminate. Speedometer ...................................................................................................... page 5-24 Odometer, Trip Meter and Trip Meter Selector .................................................. page 5-24 Tachometer ..................................................................................................
Driving Your Mazda Instrument Cluster and Indicators qSpeedometer NOTE The speedometer indicates the speed of the vehicle. qOdometer, Trip Meter and Trip Meter Selector The display mode can be changed between trip meter A and trip meter B by pressing the selector while one of them is displayed. The selected mode will be displayed. (Standard meter) The odometer and trip meter can be displayed as follows even when the ignition switch is in the ACC or LOCK position.
Driving Your Mazda Instrument Cluster and Indicators The trip meter records the total distance the vehicle is driven until the meter is again reset. Return it to “0.0” by holding the selector depressed for more than 1 second. Use this meter to measure trip distances and to compute fuel consumption. qEngine Coolant Temperature Gauge The engine coolant temperature gauge shows the temperature of the engine coolant. NOTE l Only the trip meters record tenths of kilometers (miles).
Driving Your Mazda Instrument Cluster and Indicators qFuel Gauge Bright The fuel gauge shows approximately how much fuel is in the tank. We recommend keeping the tank over 1/4 full. When the low fuel warning light illuminates or when the needle is near E, refuel as soon as possible. Low fuel warning light qDashboard Illumination Rotate the thumb wheel to adjust the brightness of the instrument cluster and other illuminations in the dashboard.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds Warning/Indicator Lights Warning/Indicator lights will appear in any of the highlighted areas Signal Warning/Indicator Lights Page Brake System Warning Light 5-29 Charging System Warning Light 5-30 Engine Oil Pressure Warning Light 5-30 Check Engine Light 5-30 ABS Warning Light 5-31 Air Bag/Front Seat Belt Pretensioner System Warning Light 5-31 Low Fuel Warning Light 5-32 5-27
Driving Your Mazda Warning/Indicator Lights and Beep Sounds Signal 5-28 Warning/Indicator Lights Page Seat Belt Warning Light/Beep 5-32 Door-Ajar Warning Light 5-33 Low Washer Fluid Level Warning Light 5-33 Automatic Transaxle Warning Light 5-33 Security Indicator Light 5-34 Headlight High-Beam Indicator Light 5-34 Shift Position Indicator Light 5-34 TCS Indicator Light 5-35 TCS OFF Indicator Light 5-35 Cruise Main Indicator Light 5-35 Cruise Set Indicator Light 5-36 Light-On Indi
Driving Your Mazda Warning/Indicator Lights and Beep Sounds qBrake System Warning Light Even if the light goes off, have your brake system inspected as soon as possible. Electronic brake force distribution system warning This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the ignition switch in the START or ON position. It goes off when the parking brake is fully released.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds qCharging System Warning Light If the light illuminates while driving: 1. Drive to the side of the road and park off the right-of-way. 2. Turn off the engine and inspect the engine oil level (page 8-11). If it's low, add oil. 3. Check the light. This warning light illuminates when the ignition switch is turned to the ON position and turns off when the engine is started.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds l The fuel-filler cap is missing or not tightened securely. If the check engine light remains on or flashes continuously, do not drive at high speeds and consult an Authorized Mazda Dealer as soon as possible. qABS Warning Light The warning light stays on for a few seconds when the ignition switch is turned to the ON position. If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds A system malfunction is indicated when the warning light constantly flashes, illuminates or doesn't illuminate at all when the ignition switch is turned to the ON position. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not work in an accident. WARNING Self-Servicing the Air Bag/ Pretensioner Systems: Self-servicing or tampering with the systems is dangerous.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds Condition The driver's seat belt is not fastened when the vehicle speed reaches 8 km/h (5 mph) and about 1 minute has elapsed since the ignition switch was turned to the ON position. The driver's seat belt is fastened while the warning light and the beep sound are activated. The driver's seat belt is fastened before the ignition switch is turned to the ON position.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds CAUTION qHeadlight High-Beam Indicator Light If the automatic transaxle warning light illuminates, the transaxle has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an Authorized Mazda Dealer as soon as possible. This light indicates one of two things: qSecurity Indicator Light l The high-beam headlights are on. l The turn signal lever is in the flash-topass position.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds Gear position indicator When the shift lever is in the D or M position, the numeral for the selected gear illuminates. qTCS OFF Indicator Light í qTCS Indicator Light í This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. It also comes on when the TCS OFF switch is pressed and TCS is switched off.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds qCruise Set Indicator Light NOTE If an indicator light remains illuminated (does not flash) or if it flashes abnormally, the turn signal bulb may be burned out. This light comes on when a cruising speed is set. qLight-On Indicator Light (Blackout meter) This indicator light comes on when the exterior lights are on.
Driving Your Mazda Warning/Indicator Lights and Beep Sounds Beep Sounds qSeat Belt Warning Beep If the driver's seat belt is not fastened when the ignition switch is turned to the ON position, a beep sound will be heard for about 6 seconds. qIgnition Key Reminder If the ignition switch is in the LOCK or ACC position, a beep sound will be heard when the driver's door is opened.
Driving Your Mazda Switches and Controls qLights-On Reminder Lighting Control If lights are on and the key is removed from the ignition switch, a beep sound will be heard when the driver's door is opened. qHeadlight High-Low Beam Push the lever forward for high beam. Pull it back for low. High beam qHeadlights To turn on the lights, turn the headlight switch on the end of the control lever.
Driving Your Mazda Switches and Controls qDaytime Running Lights (Canada) In Canada, vehicles must be driven with the headlights on during daytime operation. For that reason, the daytime running lights automatically turn on when the ignition switch is turned to the ON position. NOTE The Daytime Running Lights turn off when the parking brake is applied. Turn and Lane-Change Signals qTurn Signal Move the signal lever down (for a left turn) or up (for a right turn) to the stop position.
Driving Your Mazda Switches and Controls Fog Lights í Use this switch to turn on the fog lights. They help you to see as well as to be seen. To turn the front fog lights on, rotate the fog light switch to the position. The headlight switch must be in the position to turn on the front fog lights. Fog light switch To turn them off, rotate the fog light switch to the OFF position or turn the headlight switch to the or OFF position. NOTE The fog lights will turn off when the headlights are set at high beam.
Driving Your Mazda Switches and Controls qWindshield Wipers Turn the wipers on by pulling the lever down. INT ― Intermittent 1 ― Normal 2 ― Fast Variable-speed intermittent wipers Set the lever to INT and choose the interval timing by rotating the ring. One-touch wipers For a single wiping cycle, push the lever up to MIST. qWindshield Washer Pull the lever toward you and hold it to spray washer fluid.
Driving Your Mazda Switches and Controls Rear Window Wiper and Washer í The ignition switch must be in the ON position. qRear Window Wiper Rear Window Defroster The rear window defroster clears frost, fog, and thin ice from the rear window. The ignition switch must be in the ON position. Press the switch to turn on the rear window defroster. The rear window defroster operates for about 15 minutes and turns off automatically. The indicator light illuminates during operation.
Driving Your Mazda Switches and Controls Fully Automatic Type Air-Conditioning Horn To sound the horn, press around the mark on the steering wheel. CAUTION Don't use sharp instruments or window cleaners with abrasives to clean the inside of the rear window surface. They may damage the defroster grid inside the window. NOTE This defroster is not designed for melting snow. If there is an accumulation of snow on the rear window, remove it before using the defroster.
Driving Your Mazda Switches and Controls Hazard Warning Flasher The hazard warning lights should always be used when you stop on or near a roadway. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it. HomeLink Wireless Control System í NOTE HomeLink and HomeLink house are registered trademarks of Johnson Controls.
Driving Your Mazda Switches and Controls WARNING Safety Stop and Reverse Feature: Using the HomeLink system with any garage door opener that lacks the safety stop and reverse feature as required by federal safety standards is dangerous. (This includes garage doors manufactured before April 1, 1982.) Using these garage door openers can increase the risk of serious injury or death. For further information, contact HomeLink at 1-800-355-3515 or www.homelink.com or your Authorized Mazda Dealer.
Driving Your Mazda Switches and Controls qProgramming the HomeLink System CAUTION When programming a garage door opener or a gate, disconnect the power to these devices before performing programming, as continuous operation of the devices could damage the motor. The HomeLink system provides 3 buttons which can be individually selected and programmed using the transmitters for current, on-market devices as follows: 1.
Driving Your Mazda Switches and Controls 7. Firmly press and release the “learn” or “smart” button. (The name and color of the button may vary by manufacturer.) NOTE There are 30 seconds in which to initiate step 8. 8. Return to the vehicle and firmly press, hold for two seconds and release the programmed HomeLink button.
Driving Your Mazda Switches and Controls qReprogramming the HomeLink system To program a device to HomeLink using a HomeLink button previously trained, follow these steps: 1. Press and hold the desired HomeLink button. DO NOT release the button. 2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink button, proceed with “Programming” - step 2.
6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audio system. Climate Control System ............................................................... 6-2 Operating Tips ........................................................................... 6-2 Vent Operation .......................................................................... 6-3 Types of the Climate Control System ....................................... 6-5 Manual Type ...............................
Interior Comfort Climate Control System Operating Tips qOperating the Climate Control System Operate the climate control system with the engine running. NOTE To prevent the battery from being discharged, do not leave the fan control dial on for a long period of time when the engine is not running. qClearing the Air Inlet Clear all obstructions like leaves, snow and ice from the hood and the air inlet in the cowl grille to improve the system efficiency.
Interior Comfort Climate Control System Vent Operation qAdjusting the Vents Directing airflow 2. Rotate the air vent left and right to adjust the direction of airflow. 1. Press the upper part of the air vent to open it. NOTE When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.
Interior Comfort Climate Control System qSelecting the Airflow Mode Dashboard Vents Defroster and Floor Vents Dashboard and Floor Vents Defroster Vents Floor Vents 6-4
Interior Comfort Climate Control System Types of the Climate Control System Manual type and fully automatic type climate control systems are explained separately. Check your vehicle's climate control type and read the appropriate pages. Climate control information is displayed on the information display. Manual Type ............................................................................................................ page 6-6 Fully Automatic Type .....................................................
Interior Comfort Climate Control System Manual Type Air intake selector Rear window defroster switch A/C Switch Temperature control dial Fan control dial qControl Switches Mode selector dial Fan control dial Temperature control dial Cold Hot This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold. 6-6 This dial allows variable fan speeds.
Interior Comfort Climate Control System Mode selector dial Air intake selector Turn the mode selector dial to select airflow mode (page 6-4). This switch controls the source of air entering the vehicle. A/C switch Press the switch to alternate between the and positions. The indicator light for the selected mode will illuminate. It is recommended that under normal conditions the switch be kept in the outside air position. Outside air position ( Push the switch to turn the air conditioner on.
Interior Comfort Climate Control System WARNING The Recirculated Air Position: position in cold or Using the rainy weather will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident. Do not use the position in cold or rainy weather. Rear window defroster switch When using the rear window defroster switch, refer to Rear Window Defroster (page 5-42). NOTE l If the windshield fogs up easily, set the mode selector dial to the position.
Interior Comfort Climate Control System NOTE l When maximum cooling is desired, set the temperature control dial to the extreme cold position and set the air position, intake selector to the then set the fan control dial to position 4. l If warmer air is desired at floor level, set the mode selector dial at the position and adjust the temperature control dial to maintain maximum comfort.
Interior Comfort Climate Control System 3. Set the temperature control dial to the desired position. 4. Set the fan control dial to the desired speed. 5. Turn on the air conditioner.
Interior Comfort Climate Control System Fully Automatic Type Fan control dial Air intake selector Rear window defroster switch OFF switch Temperature control dial A/C Switch Mode selector switch Auto switch Windshield defroster switch qControl Switches AUTO switch l Outside/Recirculated air selection l Air conditioner operation NOTE AUTO switch indicator light By pressing the AUTO switch the following functions will be automatically controlled in accordance with the set temperature: l Airf
Interior Comfort Climate Control System OFF switch Mode selector switch Pressing the OFF switch shuts off the climate control system. The desired airflow mode can be selected (page 6-4). Temperature control dial Cold NOTE l To set the air vent to , press the windshield defroster switch. A/C switch Fan control dial High The fan has seven speeds. The selected speed will be displayed.
Interior Comfort Climate Control System Windshield defroster switch NOTE The air conditioner may not function when the outside temperature approaches 0 °C (32 °F). (Indicator remains on even when system is off.) Air intake selector Press the switch to defrost the windshield and front door windows. Rear window defroster switch When using the rear window defroster switch, refer to Rear Window Defroster (page 5-42). Outside or recirculated air positions can be selected.
Interior Comfort Climate Control System To turn off the system, press the OFF switch. NOTE l For an optimal cabin temperature, set the temperature close to 25.0°C (77.0°F). Adjust to the desired temperature if necessary. l Setting the temperature to maximum high or low will not provide the desired temperature at a faster rate. l To prevent cool air blowing from the vents when heating right after starting the engine, the amount of airflow is reduced until the air warms up.
Interior Comfort Climate Control System Interior temperature sensor 6-15
Interior Comfort Audio System Antenna qDetachable Type To remove the antenna, turn it counterclockwise. To install the antenna, turn it clockwise. Make sure the antenna is securely installed. Remove Install Operating Tips for Audio System WARNING Do Not Adjust Audio While Driving the Vehicle: Adjusting the audio while driving the vehicle is dangerous as it could distract your attention from the vehicle operation which could lead to a serious accident.
Interior Comfort Audio System qRadio Reception AM characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere. Therefore, they can reach longer distances than FM signals. Because of this, two stations may sometimes be picked up on the same frequency at the same time. Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signals cannot travel beyond the horizon.
Interior Comfort Audio System Flutter/Skip noise Signals from an FM transmitter move in straight lines and become weak in valleys between tall buildings, mountains, and other obstacles. When a vehicle passes through such an area, the reception conditions may change suddenly, resulting in annoying noise. Strong signal noise This occurs very close to a transmitter tower. The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver.
Interior Comfort Audio System qOperating Tips for Cassette Tape Player l If the cassette tape is loose, it may produce poor sound or performance during playback. Use a pencil or something similar to remove any slack. l Only cassette tapes that play no longer than 90 minutes should be used. Cassette tape exceeding 90 minutes are thin and may easily break. l Do not leave a cassette tape in the tape player slot when not in use.
Interior Comfort Audio System qOperating Tips for Mini Disc (MD) Player l The MD player can also play MDLPs that have been recorded in MDLP mode. (MDLPs bearing the identification logo as shown below). l When inserting the MD, make sure the MD label is facing up, and the MD is oriented to the insertion slot in the direction of the arrow. If not inserted correctly, the MD will be ejected, or may remain stuck in the MD deck. l Do not touch the internal part of the MD.
Interior Comfort Audio System qOperating Tips for CD Player/InDash CD Changer l The CD revolves at high speed within the unit. Defective (cracked or badly bent) CDs should never be used. l Do not use non-conventional discs such as heart-shaped, octagonal discs, etc. The CD player/changer could be damaged. l A new CD may have rough edges on its inner and outer perimeters. If a disc with rough edges is used, proper setting will not be possible and the CD player/changer will not play the CD.
Interior Comfort Audio System l l l l When driving over uneven surfaces, the sound may jump. l Dust, finger smudges, and dirt can decrease the amount of light reflected from the signal surface, thus affecting sound quality. If the CD should become soiled, gently wipe it with a soft cloth from the center of the CD to the edge. l Do not use record sprays, antistatic agents, or household spray cleaners.
Interior Comfort Audio System Audio Set CD Player In-dash CD Changer Illustration is of a representative audio unit. Cassette Tape Player Mini Disc (MD) Player Power/Volume/Sound Controls .............................................................................. page 6-24 Operating the Radio ............................................................................................... page 6-28 Operating the Cassette Tape Player .....................................................................
Interior Comfort Audio System qPower/Volume/Sound Controls Power/Volume dial Power ON/OFF Turn the ignition switch to the ACC or ON position. Press the power/volume dial to turn the audio system on. Press the power/volume dial again to turn the audio system off. Audio control dial Turn the power/volume dial to the right to increase volume, to the left to decrease it. Audio sound adjustment 1. Press the audio control dial to select the function. The selected function will be indicated.
Interior Comfort Audio System BOSE Sound System-equipped model BOSE Sound Systemequipped model Indication * Select mode * Depending on the mode selected, the indication changes. 2.
Interior Comfort Audio System The following four modes are available. Select the desired mode. Mode Volume change No change Minimum Medium Maximum Turn the audio control dial to select the ALC OFF, ALC LEVEL1―3 mode. The selected mode will be indicated.
Interior Comfort Audio System 6-27
Interior Comfort Audio System qOperating the Radio Band selector buttons Scan button Satellite button* Seek tuning button Auto memory button/Electric serial number button* Channel preset buttons Manual tuning dial *For reception of optional SIRIUS digital satellite radio. Used on vehicles equipped with the separately sold SIRIUS digital satellite radio unit. For information on use, read the manual accompanying the SIRIUS unit.
Interior Comfort Audio System Seek tuning Pressing the seek tuning button ( , ) will cause the tuner to seek a higher or lower frequency automatically. NOTE If you continue to press and hold the button, the frequency will continue changing without stopping. Scan tuning Press the scan button ( ) to automatically sample strong stations. Scanning stops at each station for about 5 seconds. To hold a station, press the scan button ( ) again during this interval.
Interior Comfort Audio System qOperating the Cassette Tape Player í Cassette tape play button Fast-forward button APC button: (next program) (one being played) Rewind button Cassette tape eject button Repeat button Program button Dolby NR button Cassette tape insert Dolby noise reduction Insert the cassette tape into the slot, open edge to the right and cassette tape will begin play, and “TAPE PLAY” will be displayed.
Interior Comfort Audio System NOTE NOTE The cassette tape can be ejected when the ignition switch is in the OFF position. APC may not operate properly if: Fast-forward/Rewind Press the fast-forward button ( ) to fast-forward. ) to rewind. Press the rewind button ( To stop this operation and play the cassette tape, press the button again. NOTE When the cassette tape ends during fastforward or rewind, it automatically stops and starts playing.
Interior Comfort Audio System qOperating the Mini Disc (MD) Player í MD play button Fast-forward button Track up button Scan button Display button Track down button Reverse button MD slot Repeat button MD eject button Random button Display feed dial Inserting the MD Fast-forward/Reverse Insert the MD, label-side up with the arrow pointed to the slot. The autoloading mechanism will set the MD and begin play.
Interior Comfort Audio System Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play. NOTE If the unit is left in scan, normal play will resume where scan was selected. Repeat play This feature makes it possible to listen to a selection repeatedly. NOTE If there is no song or disc title recorded on the MD, “NO TITLE” will be displayed.
Interior Comfort Audio System qOperating the Compact Disc (CD) Player í Fast-forward button CD slot CD play button CD eject button Track up button Scan button Reverse button Track down button Repeat button Random button Inserting the CD Fast-forward/Reverse Insert the CD into the slot, label-side up. The auto-loading mechanism will set the CD and begin play. There will be a short lapse before play begins while the player reads the digital signals on the CD.
Interior Comfort Audio System Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play. NOTE If the unit is left in scan, normal play will resume where scan was selected. Repeat play This feature makes it possible to listen to a selection repeatedly. Press the repeat button ( ) during play. The current selection will be repeated (“RPT” will be displayed).
Interior Comfort Audio System qOperating the In-Dash CD Changer í Channel preset buttons Load button CD play button CD slot CD eject button Track up button Scan button Track down button Disc down button Repeat button Disc up button Reverse button Random button Inserting the CD Normal insertion The CD must be label-side up when inserting. The auto-loading mechanism will set the CD and begin play.
Interior Comfort Audio System 3. Pull out the CD. Multiple insertion 1. Press and hold the load button ( for about 2 seconds until a beep is heard. ) Multiple ejection 2. Wait 3 seconds or press the load button ) again within 3 seconds after the ( beep is heard. 1. Press and hold the CD eject button ( for about 2 seconds until a beep is heard. 3. When “IN” is displayed, insert the CD. 2. Wait 3 seconds or press the CD eject button ( ) again within 3 seconds after the beep is heard. 4.
Interior Comfort Audio System Press the track down button ( ) once to skip back to the beginning of the current track. Disc search Press the disc up button ( ) to skip forward to the beginning of the next CD. Press the disc down button ( ) to skip back to the beginning of the previous CD. Music scan This feature helps to find a program by playing about the first 10 seconds of each track. Press the scan button ( ) during play to start scan play operation (the track number will flash).
Interior Comfort Audio System qError Indications If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer. Indication Cause MD is inserted upside down CHECK MD MD is defective CD is inserted upside down CHECK CD CD is defective Solution Insert the MD properly. If the error indication does not disappear, consult an Authorized Mazda Dealer. Insert another MD properly.
Interior Comfort Audio System Audio Control Switch Operation (Steering Wheel) í qChanging the Source Press the mode switch ( ) to change the audio source (FM1 radio> FM2 radio> AM radio> CD player or CD changer> Cassette tape player or MD player> SIRIUS1> SIRIUS2> SIRIUS3> cyclical). NOTE Mazda installed this system to help you avoid being too distracted using audio controls on the dashboard. Always make safe driving your first priority.
Interior Comfort Audio System qSeek Switch qMute Switch Press the mute switch ( ) once to mute audio, press it again to resume audio output. When listening to the radio Press the seek switch ( , ), the radio switches to the next/previous stored station in the order that it was stored (1―6). Press the seek switch ( , ) for about 2 seconds until a beep is heard to seek a higher or lower frequency automatically.
Interior Comfort Audio System Safety Certification This CD player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the U.S. Department of Health and Human Services. CAUTION l This CD player should not be adjusted or repaired by anyone except qualified service personnel. If servicing is required, contact an Authorized Mazda Dealer.
Interior Comfort Interior Equipment Sunvisors When you need a sunvisor, lower it for use in front or swing it to the side. Sunvisor Interior Lights qIlluminated Entry System When the illuminated entry system operates, the overhead light (switch is in the DOOR position) and the courtesy lights turn on for: l About 30 seconds after the driver's door is unlocked and the ignition key is removed. l About 15 seconds after all doors are closed.
Interior Comfort Interior Equipment qOverhead Lights Rear Front With moonroof Switch Position Without moonroof Rear Overhead Lights Light off l Light on when any door is open l Light on or off when the illuminated entry system is on qMap Lights The map lights are switched on or off by pressing the switches.
Interior Comfort Interior Equipment Without moonroof Switch Position Luggage Compartment Light Light off Light on when the hatch is open Sport Wagon Rear Switch Position Luggage Compartment Light Light off Light on when the liftgate is open qCourtesy Lights Turns on when any door is open or the illuminated entry system is on.
Interior Comfort Interior Equipment Information Display CLOCK button SET button qInformation Display Functions The information display has the following functions: l Clock l Ambient Temperature Display (Outside Temperature Display) l Climate Control Display l Audio Display 6-46 AMB button
Interior Comfort Interior Equipment qClock When the ignition switch is in the ACC or ON position, the time is displayed. 12:01―12:29→12:00 12:30―12:59→1:00 NOTE When the SET button is released, the seconds are reset to “00”. qAmbient Temperature Display When the ignition switch is in the ON position, press the AMB button to display the ambient temperature. Time setting 1. Press the CLOCK button until a beep sounds, and “12Hr” and “24Hr” will be displayed. 2.
Interior Comfort Interior Equipment qClimate Control Display The climate control system status is displayed. To operate the climate control system, refer to “Climate Control System” (page 6-2). Lighter The ignition switch must be in the ACC or ON position. 1. Open the cover. qAudio Display The audio system status is displayed. To operate the audio system, refer to “Audio System” (page 6-16). 2. Press the lighter in and release it. When ready for use, it automatically pops out.
Interior Comfort Interior Equipment CAUTION l Don't touch the metal part of the lighter, you may burn yourself. l Don't hold the lighter in because it will overheat. l Don't use the lighter socket for plugin accessories such as shavers and coffee pots. They may damage it or cause electrical failure. Use only a genuine Mazda lighter or the equivalent. l If the lighter doesn't pop out within 30 seconds, remove it to prevent overheating. Ashtray CAUTION Don't use the ashtray for trash.
Interior Comfort Interior Equipment Cup Holder WARNING qFront To use the cup holder, open the center console by pressing the lower center part of its cover. Using Cup Holder: Using a cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded. Never use a cup holder to hold hot liquids while the vehicle is moving.
Interior Comfort Interior Equipment Bottle Holder Bottle holders are on the inside of the front doors. Storage Compartments WARNING Open Storage Boxes: Driving with the storage boxes open is dangerous. To reduce the possibility of injury in an accident or a sudden stop, keep the storage boxes closed when driving. CAUTION Bottle holder CAUTION Don't use the bottle holders for containers without caps. The contents may spill when the door is opened or closed.
Interior Comfort Interior Equipment qStorage Pocket qGlove Box To open, push the release catch down and pull the lid downward. To open the glove box, pull the latch toward you. Insert the master key and turn it clockwise to lock, counterclockwise to unlock. Unlock Lock qCenter Box with Lid To use, pull the knob, and the lid opens automatically. qCenter Console To open, pull the lower release catch.
Interior Comfort Interior Equipment Small items can be placed in the tray of the center console lid. To open it, pull the upper release catch. Luggage compartment, left side Knob qStorage Box (5-Door/Sport Wagon) To open, turn the knobs and remove the cover.
Interior Comfort Interior Equipment 5-Door qCargo Sub-Compartment (Sport Wagon) To use the cargo sub-compartment, remove trunk board A and open trunk board B.
Interior Comfort Interior Equipment Accessory Socket The ignition switch must be in the ACC or ON position. Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC12 V, 10 A). (Vehicles with tray cap) When placing an electrical device (e.g. cellular phone) in the tray which is connected with the accessory socket, pass the plug cord through the slot in the cap. Cap slot, closed Cap slot, opened 1. Open the lid by pulling the upper release catch.
Interior Comfort Interior Equipment 5. Pass the plug cord through the hole of the tray and insert the plug in the socket. Plug 6. Make sure the plug cord is running through the cap slot; reinstall the cap and turn it clockwise (about 45° to the opened position). Plug cord 6-56 7. Set the plug cord into the slit of the tray mat and replace the tray mat.
7 In Case of an Emergency Helpful information on what to do in an emergency. Parking in an Emergency ............................................................. 7-2 Parking in an Emergency .......................................................... 7-2 Flat Tire ......................................................................................... 7-3 Spare Tire and Tool Storage ...................................................... 7-3 Changing a Flat Tire ............................................
In Case of an Emergency Parking in an Emergency Parking in an Emergency The hazard warning lights should always be used when you stop on or near a roadway. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it. Depress the hazard warning flasher and all four turn signals will flash. NOTE l The turn signals don't work when the hazard warning lights are on.
In Case of an Emergency Flat Tire Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram.
In Case of an Emergency Flat Tire qJack (5-Door/Sport Wagon) To remove the jack 1. Turn the knob and remove the cover. (Sedan) 1. Remove the jack container lid. 2. Remove the jack container lid. 2. Turn the wing bolt counterclockwise. 3. Turn the wing bolt counterclockwise. To secure the jack Perform the removal procedure in reverse.
In Case of an Emergency Flat Tire qSpare Tire Your Mazda has a temporary spare tire. The temporary spare is lighter and smaller than a conventional tire, and is designed only for emergency use and should be used only for VERY short periods. Temporary spares should NEVER be used for long drives or extended periods. CAUTION To avoid damage to the temporary spare or to the vehicle, observe the following precautions: l Don't exceed 80 km/h (50 mph). l Avoid driving over obstacles.
In Case of an Emergency Flat Tire 2. Turn the tire wing bolt counterclockwise. (5-Door) 1. For vehicles equipped with a subwoofer, uncouple the connector. 2. Remove the trunk board. 3. For vehicles equipped with a subwoofer, loosen the wing bolt and remove the woofer and spare tire. Lock washer Wing bolt (Black) Sub-woofer Connector NOTE Extra strength may be required to uncouple the connector. Be sure to squeeze the tab firmly.
In Case of an Emergency Flat Tire (Sport Wagon) 1. Remove trunk board A and open trunk board B. 3. For vehicles equipped with a subwoofer, loosen the wing bolt and remove the woofer and spare tire. Lock washer Wing bolt (Black) Trunk board B Sub-woofer Trunk board A 2. For vehicles equipped with a cargo sub-compartment, remove the cargo sub-compartment. For vehicles not equipped with a subwoofer, loosen the hold-down bolt and remove the spare tire.
In Case of an Emergency Flat Tire Changing a Flat Tire NOTE If the following occurs while driving, it could indicate a flat tire. 1. Park on a level surface off the right-ofway and firmly set the parking brake. 2. Put a vehicle with an automatic transaxle in Park (P), a manual transaxle in Reverse (R) or 1, and turn off the engine. l Steering becomes difficult. 3. Turn on the hazard warning flasher. l The vehicle begins to vibrate excessively. 4.
In Case of an Emergency Flat Tire qRemoving a Flat Tire 1. If your vehicle is equipped with a wheel cover, pry off the wheel cover with the beveled end of the lug wrench. 2. Loosen the lug nuts by turning them counterclockwise one turn each, but don't remove any lug nuts until the tire has been raised off the ground. 3. Place the jack under the jacking position closest to the tire being changed. NOTE Force the end of the lug wrench firmly between wheel and cover, or removal will be difficult.
In Case of an Emergency Flat Tire WARNING Incorrect Jacking Position: Attempting to jack the vehicle in positions other than those recommended in this manual is dangerous. The vehicle could slip off the jack and seriously injure or even kill someone. Use only the front and rear jacking positions recommended in this manual. Improper Jack: Using a jack that isn't designed for your Mazda is dangerous. The vehicle could slip off the jack and seriously injure someone.
In Case of an Emergency Flat Tire qLocking Lug Nuts í qMounting the Spare Tire If your vehicle has optional antitheft wheel lug nuts, one on each wheel will lock the tires and you must use a special key to unlock them. This key is attached to the lug wrench and is stored with the spare tire. Register them with the lock manufacturer by filling out the card provided in the glove box and mailing it in the accompanying envelope.
In Case of an Emergency Flat Tire 3. Install the lug nuts with the beveled edge inward; tighten them by hand. WARNING Don't Apply Oil or Grease to Lug Nuts, Bolts: Applying oil or grease to lug nuts and bolts is dangerous. The lug nuts could loosen while driving and cause the tire to come off, resulting in an accident. In addition, lug nuts and bolts could be damaged if tightened more than necessary.
In Case of an Emergency Flat Tire WARNING Metric Studs and Lug Nuts: Because the wheel studs and lug nuts on your Mazda have metric threads, using a non-metric nut is dangerous. On a metric stud, it would not secure the wheel and would damage the stud, which could cause the wheel to slip off and cause an accident. Be sure to reinstall the same nuts you removed or replace them with metric nuts of the same configuration. Incorrect Tire Air Pressure: Driving on tires with incorrect air pressure is dangerous.
In Case of an Emergency Overheating Overheating If the temperature gauge indicates overheating, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot. WARNING If the temperature gauge indicates overheating: 1. Drive safely to the side of the road and park off the right-of-way. 2. Put a vehicle with an automatic transaxle in park (P), a manual transaxle in neutral. Apply the parking brake. 3. Turn off the air conditioner.
In Case of an Emergency Overheating If you find a leak or other damage, or if coolant is still leaking: Stop the engine and call an Authorized Mazda Dealer. 2.3-liter engine Cooling system cap Coolant reservoir 3.0-liter engine Coolant reservoir Cooling system cap If you find no problems, the engine is cool, and no leaks are obvious: Carefully add coolant as required (page 8-13). CAUTION If the engine continues to overheat or frequently overheats, have the cooling system inspected.
In Case of an Emergency Emergency Starting Starting a Flooded Engine If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. Depress the accelerator all the way and hold it there. 2. Turn the ignition switch to the START position and hold it there―for up to 10 seconds. If the engine starts, release the key and accelerator immediately because the engine will suddenly rev up. 3.
In Case of an Emergency Emergency Starting Jump-Starting Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work. WARNING Eye Protection: Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID which could cause blindness if splashed into your eyes.
In Case of an Emergency Emergency Starting WARNING Low Fluid Level or Frozen Battery: Jump-starting a frozen battery or one with a low fluid level is dangerous. It may rupture or explode, causing serious injury. Don't jump-start a frozen battery or one with a low fluid level. Connecting to Negative Terminal: Connecting the end of the second cable to the negative ( ) terminal of the discharged battery is dangerous. A spark could cause the gas around the battery to explode and injure someone.
In Case of an Emergency Emergency Starting l Connect the other end to a solid, stationary, exposed metallic point (for example, the strut mounting bolt) away from the discharged battery (4). Jumper cables Connect cables in numerical order and disconnect in reverse order. Discharged Booster battery Push-Starting WARNING Towing a Vehicle to Start It: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide.
In Case of an Emergency Emergency Towing Towing Description We recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed. CAUTION Don't tow the vehicle pointed backward with driving wheels on the ground. This may cause internal damage to the transaxle. A towed vehicle usually should have its front wheels off the ground.
In Case of an Emergency Emergency Towing CAUTION Do not use the hooks under the rear bumper for towing and tying down, as they cannot hold the load and it will damage the bumper. Recreational Towing An example of “recreational towing” is towing your vehicle behind a motorhome. The transaxle is not designed for towing this vehicle on all 4 wheels. When doing recreational towing refer to “Towing Description” (page 7-20) and carefully follow the instructions.
7-22
8 Maintenance and Care How to keep your Mazda in top condition. Introduction .................................................................................. 8-2 Introduction ............................................................................... 8-2 Scheduled Maintenance ................................................................ 8-3 Scheduled Maintenance ............................................................ 8-3 Owner Maintenance .....................................................
Maintenance and Care Introduction Introduction Be extremely careful and prevent injury to yourself and others or damage to your vehicle when using this manual for inspection and maintenance. If you're unsure about any procedure it describes, we strongly urge you to have a reliable and qualified service shop perform the work, preferably an Authorized Mazda Dealer. Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
Maintenance and Care Scheduled Maintenance Scheduled Maintenance Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply. If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).
Maintenance and Care Scheduled Maintenance qSchedule 1 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.5 15 22.5 30 37.5 45 52.5 60 ENGINE Drive belts (tension) 2.3-liter engine I 3.0-liter engine Engine valve clearance (2.
Maintenance and Care Scheduled Maintenance qSchedule 2 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 ×1000 miles 5 10 15 20 25 30 35 40 45 50 55 48 96 60 ENGINE Drive belts (tension) 2.3-liter engine I 3.0-liter engine Engine valve clearance (2.
Maintenance and Care Scheduled Maintenance Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 Maintenance Interval ×1000 km 8 16 24 32 40 48 56 64 72 80 88 ×1000 miles 5 10 15 20 25 30 35 40 45 50 55 AIR CONDITIONER SYSTEM (if installed) Cabin air filter Replace every 40,000 km (25,000 miles) or 24 months 48 96 60 Chart symbols I: Inspect and repair, clean, adjust, or replace if necessary.
Maintenance and Care Owner Maintenance Owner Maintenance Schedule The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.
Maintenance and Care Owner Maintenance Owner Maintenance Precautions Improper or incomplete service may result in problems. This section gives instructions only for items that are easy to perform. As explained in the Introduction (page 8-2), several procedures can be done only by a qualified service technician with special tools. Improper owner maintenance during the warranty period may affect warranty coverage. For details, read the separate Mazda Warranty statement provided with the vehicle.
Maintenance and Care Owner Maintenance Engine Compartment Overview 2.3-liter engine Engine oil-filler cap Automatic transaxle fluid-level dipstick (only for automatic transaxle) Brake/Clutch fluid reservoir Windshield washer fluid reservoir Battery Power steering fluid reservoir Fuse block Engine oil dipstick Engine coolant reservoir 3.
Maintenance and Care Owner Maintenance Engine Oil qRecommended Oil Use SAE 5W-20 engine oil. Oil container labels provide important information. A chief contribution this type of oil makes to fuel economy is reducing the amount of fuel necessary to overcome engine friction. U.S.A. and CANADA Only use oils “Certified For Gasoline Engines” by the American Petroleum Institute (API).
Maintenance and Care Owner Maintenance The quality designation SL, or ILSAC must be on the label. –30 –20 –10 –20 0 20 10 0 40 20 60 30 40 3.0-liter engine 50 Full OK Low 80 100 120 5W-20 qInspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 5. Pull it out again and examine the level. It's OK between MIN and MAX. But if it's near or below MIN, add enough oil to bring the level to MAX. CAUTION 2. Warm up the engine to normal operating temperature. 3.
Maintenance and Care Owner Maintenance WARNING Handling Used Engine Oil: Continuous contact with used engine oil is dangerous. It could cause skin cancer. Always wash with soap and water immediately after changing oil and filter. 6. Securely reinstall the oil-filler cap. 2.3-liter engine Loosen CAUTION Remove any oil splatter from the exhaust manifold, the exhaust pipe and the shield. Oil left on these areas will smoke when the engine is running. Tighten Forward Drain plug 3.
Maintenance and Care Owner Maintenance Oil capacity (General reference only, refer to Specifications section for capacities.) Engine Coolant qInspecting Coolant Level NOTE l l The indicated engine oil capacities are for general reference purposes only. When adding or changing oil, verify the engine oil level with the oil dipstick. Use only specified engine oil (page 10-4). Changing oil filter Because you need a special tool to retighten the filter, an Authorized Mazda Dealer should do the work.
Maintenance and Care Owner Maintenance Inspect the antifreeze protection and coolant level in the coolant reservoir at least once a year―at the beginning of the winter season―and before traveling where temperatures may drop below freezing. Inspect the condition and connections of all cooling system and heater hoses. Replace any that are swollen or deteriorated. The coolant should be at full in the radiator and between the FULL or F and LOW or L marks on the coolant reservoir when the engine is cool. 2.
Maintenance and Care Owner Maintenance For mixture percentage: Protection Above –16°C (3°F) Above –26°C (–15°F) Above –40°C (–40°F) Volume Antifreeze Demineralized solution water 35% 65% 45% 55% 55% 45% 1. Remove the cooling system cap. 2.3-liter engine Loosen Tighten To change coolant Tighten Loosen WARNING Removing the Cooling System Cap: Removing the cooling system cap while the engine is running or hot is dangerous.
Maintenance and Care Owner Maintenance 6. Run the engine at idle with the cooling system cap off. Slowly add additional coolant if necessary. 7. At this point, wait until the engine reaches normal operating temperature; then depress the accelerator two or three times. Add more coolant, if necessary, until the system is full. 8. Install the cooling system cap. Inspect all connections for leaks. Inspect the level in the coolant reservoir one more time.
Maintenance and Care Owner Maintenance qAdding Brake/Clutch Fluid WARNING Spilled Brake Fluid: Spilled brake fluid is dangerous. If it gets in your eyes, they could be seriously injured. If this happens, immediately flush your eyes with water and get medical attention. Brake fluid spilled on a hot engine could cause a fire. Be careful not to spill brake fluid on yourself or on the engine. Low Brake/Clutch Fluid Levels: Low brake/clutch fluid levels are dangerous.
Maintenance and Care Owner Maintenance If new fluid is required frequently, consult an Authorized Mazda Dealer. 3.0-liter engine Inspect the fluid level at each engine oil change. Add fluid if necessary; it does not require periodic changing. Loosen Tighten Automatic Transaxle Fluid (ATF) qInspecting Automatic Transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. The volume of fluid changes with the temperature.
Maintenance and Care Owner Maintenance WARNING Sudden Vehicle Movement: Shifting the shift lever without first depressing the brake pedal is dangerous. The vehicle could move suddenly and cause an accident. Make sure the brake pedal is applied before shifting the shift lever. 4. With the engine still idling, pull out the dipstick, wipe it clean, and put it back. Fluid cold scale B (3.
Maintenance and Care Owner Maintenance Washer Fluid Inspect fluid level in the washer fluid reservoir; add fluid if necessary. qInspecting Washer Fluid Level WARNING Substitute Washer Fluid: Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident. Use only windshield washer fluid or plain water in the reservoir.
Maintenance and Care Owner Maintenance Body Lubrication All moving points of the body, such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather. Make sure the hood's secondary latch keeps the hood from opening when the primary latch is released. Air Filter CAUTION Don't drive without an air filter. This could result in excessive engine wear.
Maintenance and Care Owner Maintenance 3.0-liter engine 2. Tilt or lift the air filter cover and remove the filter. 2.3-liter engine Air filter cover Air filter 3.0-liter engine Air filter cover Air filter 3. Wipe inside the air cleaner housing with a damp cloth. 4. Clean or replace the filter. 5. Install in the reverse order of removal. 8-22 Replace the filter according to Scheduled Maintenance (page 8-3).
Maintenance and Care Owner Maintenance Wiper Blades CAUTION l Hot waxes applied by automatic car washers have been known to affect the wiper's ability to clean windows. l To prevent damage to the wiper blades, don't use gasoline, kerosene, paint thinner, or other solvents on or near them. Contamination of either the windshield or the blades with foreign matter can reduce wiper effectiveness. Common sources are insects, tree sap, and hot wax treatments used by some commercial car washes.
Maintenance and Care Owner Maintenance 2. Hold the end of the rubber and pull until the tabs are free of the metal support. CAUTION l Don't bend or discard the stiffeners. You need to use them again. l If the metal stiffeners are switched, the blade's wiping efficiency could be reduced. So don't use the driver's side metal stiffeners on the passenger's side, or vice versa.
Maintenance and Care Owner Maintenance qReplacing Rear Window Wiper Blade (5-Door/Sport Wagon) When the wiper no longer cleans well, the blade is probably worn or cracked. Replace it. 2. Hold the end of the blade rubber and pull until the tabs are free of the metal support. Metal support CAUTION To prevent damage to the wiper arm and other components, don't move the wiper by hand. Tab (5-Door) 1. Raise the wiper arm and turn the blade assembly to expose the plastic locking clip.
Maintenance and Care Owner Maintenance 4. Carefully insert the new blade rubber. Then install the blade assembly in the reverse order of removal. (Sport Wagon) 1. Raise the wiper arm and rotate the wiper blade to the right until it unlocks, then remove the blade. 2. Pull down the blade rubber and slide it out of the blade holder. 3. Remove the metal stiffeners from the blade rubber and install them in new blades. CAUTION CAUTION To prevent damage to the rear window, don't let the wiper arm fall on it.
Maintenance and Care Owner Maintenance 4. Carefully insert the new blade rubber. Then install the blade assembly in the reverse order of removal.
Maintenance and Care Owner Maintenance Battery WARNING Battery-Related Lead Materials: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. Eye Protection: Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID which could cause blindness if splashed into your eyes.
Maintenance and Care Owner Maintenance qBattery Maintenance Tires For reasons of proper performance, safety, and better fuel economy, always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution. WARNING To get the best service from a battery: l Keep it securely mounted. l Keep the top clean and dry. l Keep terminals and connections clean, tight, and coated with petroleum jelly or terminal grease.
Maintenance and Care Owner Maintenance qTire Inflation Pressure WARNING Incorrect Tire Inflation: Overinflation or underinflation of tires is dangerous. Adverse handling or unexpected tire failure could result in a serious accident. Always inflate the tires to the correct pressure (page 10-7). Inspect all tire pressures monthly (including the spare) when the tires are cold. Maintain recommended pressures for the best ride, top handling, and minimum tire wear.
Maintenance and Care Owner Maintenance Also, inspect them for uneven wear and damage. Abnormal wear is usually caused by one or a combination of the following: l Incorrect tire pressure l Improper wheel alignment l Out-of-balance wheel l Severe braking If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace the tire when this happens.
Maintenance and Care Owner Maintenance CAUTION l l l Don't use your temporary spare tire rim with a snow tire or a conventional tire. Neither will properly fit and could damage both tire and rim. CAUTION A wrong-sized wheel may adversely affect: l Tire fit l Wheel and bearing life The temporary spare tire has a tread life of up to 5,000 km (3,000 miles), depending on road conditions and driving habits.
Maintenance and Care Owner Maintenance Light Bulbs Sedan/5-Door Overhead light/ Map lights Headlights (Low beam) Fog lights Luggage compartment light (Hatchback) Trunk light High-mount brake light (Sedan) Headlights (High beam) Parking lights Side-marker lights Front turn signal lights License plate lights High-mount brake light (Hatchback) Courtesy lights Brake lights/Taillights Rear turn signal lights Reverse lights Taillights Sport Wagon Overhead light/ Map lights Headlights (Low beam) Fog lights
Maintenance and Care Owner Maintenance Your Mazda's headlights and fog lights have replaceable halogen bulbs. 2. Remove the bulb by pushing it in slightly and turning it counterclockwise. WARNING Handling Halogen Bulbs: When a halogen bulb breaks, it is dangerous. These bulbs contain pressurized gas. If one is broken, it will explode and serious injuries could be caused by the flying glass. If the glass portion is touched with bare hands, body oil could cause the bulb to overheat and explode when lit.
Maintenance and Care Owner Maintenance 3. Disconnect the bulb from the socket. Brake lights/Taillights Brake lights/Taillights, Rear turn signal lights Rear turn signal lights (Sedan) 1. Pull the center section of the plastic retainer and remove the retainers and partially open the trunk side trim. Removal 4. Install the new bulb in the reverse order of removal. Installation NOTE 2. Turn the socket and bulb assembly counterclockwise and remove it.
Maintenance and Care Owner Maintenance (5-Door) Brake lights/Taillights 1. Turn the knob and remove the cover. Left side Right side Rear turn signal lights 2. Pull the strap and remove the cover. 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket. 5. Install the new bulb in the reverse order of removal. NOTE To replace the bulb, contact an Authorized Mazda Dealer.
Maintenance and Care Owner Maintenance (Sport Wagon) 1. Turn the knob and remove the cover. Left side Right side 5. Install the new bulb in the reverse order of removal. NOTE To replace the bulb, contact an Authorized Mazda Dealer. Reverse lights, Taillights (Sedan) 1. Pull the center section of the plastic retainer and remove the retainers, then remove the trunk rear trim. 2. Pull the strap and remove the cover. Removal Installation 3.
Maintenance and Care Owner Maintenance 4. Install the new bulb in the reverse order of removal. 4. Disconnect the bulb from the socket. (5-Door/Sport Wagon) 1. Remove the cover. 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconnect the bulb from the socket. Reverse lights Taillights 5. Install the new bulb in the reverse order of removal. (5-Door) 1. Remove the cover. 2. Turn the socket and bulb assembly counterclockwise and remove it. 4.
Maintenance and Care Owner Maintenance (Sport Wagon) 2. Disconnect the bulb by pulling it out. 1. Remove the liftgate upper trim and high-mount brake light component. 3. Install the new bulb in the reverse order of removal. 2. Turn the socket and bulb assembly counterclockwise and remove it. qReplacing Interior Light Bulbs 3. Disconnect the bulb from the socket. Overhead light/Map lights (With overhead console) 1. Remove the screws. 2.
Maintenance and Care Owner Maintenance 4. Disconnect the bulb from the socket. 3. Disconnect the bulb from the socket. 5. Install the new bulb in the reverse order of removal. 4. Install the new bulb in the reverse order of removal. Overhead light/Map lights (Without overhead console) Courtesy lights, Vanity mirror lights, and Luggage compartment light 1.
Maintenance and Care Owner Maintenance Trunk light (Sedan) Vanity mirror lights 1. Press both sides of the lens cap to remove it. 2. Disconnect the bulb by pulling it out. Edge Luggage compartment light (5-Door) 3. Install the new bulb in the reverse order of removal. Luggage compartment light (Sport Wagon) Edge 3. Install the new bulb in the reverse order of removal.
Maintenance and Care Owner Maintenance Fuses Your vehicle's electrical system is protected by fuses. 3. Pull the fuse straight out with the fuse puller provided on the fuse block located in the engine compartment. If any lights, accessories, or controls don't work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will be melted. If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible.
Maintenance and Care Owner Maintenance Replacing the fuses under the hood If the headlights or other electrical components don't work and the fuses in the cabin are OK, inspect the fuse block under the hood. If a fuse is blown, it must be replaced. Follow these steps: 1. Turn off the ignition switch and all other switches. 2. Remove the fuse block cover. 3. If a fuse is blown, replace it with a new one of the same amperage rating.
Maintenance and Care Owner Maintenance qFuse Panel Description Fuse block (Engine compartment) 1 2 3 4 5 6 DESCRIPTION SPARE SPARE SPARE ― ― INJ 7 ENG BAR 8 9 10 11 12 13 14 15 16 8-44 ENG BAR2*1 ENG BB*2 HEAD LR HEAD LL HEAD HL HEAD HR ETC HAZARD STOP TCM FUSE RATING 20A 15A 10A ― ― 15A 10A*1 15A*2 15A 5A 10A 10A 10A 10A 7.
Maintenance and Care Owner Maintenance 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 DESCRIPTION ENG+B FUEL PUMP IG KEY P.WIND ― ― IG KEY2 BLOWER BTN ― DEFOG ABS AD FAN*1 FAN2*2 FAN*1 FAN1*2 TAIL ILLUMI MAG AUDIO P.SEAT OPENER ― IG1*2 FOG MAIN FUSE RATING 7.
Maintenance and Care Owner Maintenance Fuse block (Driver's side kick-panel) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 DESCRIPTION ENGINE IG METER IG SEAT M.DEF WIPER SAS ― A/C METER ACC CIGAR ROOM R.WIP MIRROR R.CIGAR ― D.LOCK ― 8-46 í Some models. FUSE RATING 15A 15A 15A 7.
Maintenance and Care Appearance Care How to Minimize Environmental Paint Damage The paintwork on your Mazda represents the latest technical developments in composition and methods of application. Environmental hazards, however, can harm the paint's protective properties, if proper care is not taken. Here are some examples of possible damage, with tips on how to prevent them.
Maintenance and Care Appearance Care qWater Marks Occurrence Rain, fog, dew, and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicle and evaporates, the minerals will concentrate and harden to form white rings. The rings can damage your vehicle's finish. Prevention It is necessary to wash and wax your vehicle to preserve its finish according to the instructions in this section.
Maintenance and Care Appearance Care Exterior Care Follow all label and container directions when using a chemical cleaner or polish. Read all warnings and cautions. qMaintaining the Finish Washing To help protect the finish from rust and deterioration, wash your Mazda thoroughly and frequently, at least once a month, with lukewarm or cold water. If the vehicle is washed improperly, the paint surface could be scratched. Here are some examples of how scratching could occur.
Maintenance and Care Appearance Care Insects, tar, tree sap, bird droppings, industrial fallout, and similar deposits can damage the finish if not removed immediately. When prompt washing with plain water is ineffective, use a mild soap made for use on vehicles. 3. When waxing, coat evenly with the sponge supplied or a soft cloth. 4. Wipe off the wax with a soft cloth. NOTE Thoroughly rinse off all soap with lukewarm or cold water. Don't allow soap to dry on the finish.
Maintenance and Care Appearance Care CAUTION Don't use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chromeplated or anodized aluminum parts. This may result in damage to the protective coating and cause discoloration or paint deterioration. qUnderbody Maintenance Road chemicals and salt used for ice and snow removal and solvents used for dust control may collect on the underbody.
Maintenance and Care Appearance Care Interior Care qDashboard Precautions Prevent caustic solutions such as perfume and cosmetic oils from contacting the dashboard. They'll damage and discolor it. If these solutions get on the dashboard, wipe them off immediately. To keep the fabric looking clean and fresh, take care of it. Otherwise its color will be affected, it can be stained easily, and its fire-resistance may be reduced. CAUTION Use only recommended cleaners and procedures.
Maintenance and Care Appearance Care qCleaning the Window Interiors If the windows become covered with an oily, greasy, or waxy film, clean them with glass cleaner. Follow the directions on the container. CAUTION Don't scrape or scratch the inside of the rear window. You may damage the rear window defroster grid.
8-54
9 Customer Information and Reporting Safety Defects Important consumer information including warranties and add-on equipment. Customer Assistance ..................................................................... Customer Assistance (U.S.A.) .................................................. Customer Assistance (Canada) ................................................. Customer Assistance (Puerto Rico) ........................................... 9-2 9-2 9-4 9-7 Mazda Importer/Distributors ...........
Customer Information and Reporting Safety Defects Customer Assistance Customer Assistance (U.S.A.) Your complete and permanent satisfaction is our business. We are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Customer Information and Reporting Safety Defects Customer Assistance 4. Purchase date and current mileage 5. Your dealer's name and location 6. Your question(s) If you live outside the U.S.A., please contact your nearest Mazda Distributor.
Customer Information and Reporting Safety Defects Customer Assistance Customer Assistance (Canada) qSatisfaction Review Process Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In our experience, any questions, problems, or complaints regarding the operation of your Mazda or any other general service transactions are most effectively resolved by your dealer.
Customer Information and Reporting Safety Defects Customer Assistance Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer's service facilities, personnel and equipment. We urge you to follow the above three steps in sequence for most effective results. qMediation/Arbitration Program Occasionally a customer concern cannot be resolved through Mazda's Customer Satisfaction Program.
Customer Information and Reporting Safety Defects Customer Assistance CAMVAP is fully implemented in all provinces and territories. Consumers wishing to obtain further information about the Program should contact the Provincial Administrator at 1 (800) 207-0685, or by contacting the Canadian Motor Vehicle Arbitration Plan Office at: Canadian Motor Vehicle Arbitration Plan 235 Yorkland Boulevard, suite 300 North York, Ontario M2J 4Y8 http://camvap.
Customer Information and Reporting Safety Defects Customer Assistance Customer Assistance (Puerto Rico) Your complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Customer Information and Reporting Safety Defects Mazda Importer/Distributors Importer/Distributor Distributor in Each Area qU.S.A. qCANADA Mazda North American Operations 7755 Irvine Center Drive Irvine, CA 92618-2922 U.S.A. P.O. Box 19734 Irvine, CA 92623-9734 U.S.A. TEL:1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A.) Mazda Canada Inc. 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL:1 (800) 263-4680 (in Canada) (905) 787-7000 (outside Canada) qPUERTO RICO Plaza Motors Corp.
Customer Information and Reporting Safety Defects Warranty Warranties for Your Mazda l New Vehicle Limited Warranty l Distributor Major Component Limited Warranty (Canada only) l Safety Restraint System Limited Warranty l Anti-perforation Limited Warranty l Federal Emission Control Warranty (U.S.A. only) l l Emission Defect Warranty Emission Performance Warranty l California Emission Control Warranty (U.S.A.
Customer Information and Reporting Safety Defects Warranty Outside the United States Government regulations in the United States require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the United States may differ from those sold in other countries. The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries.
Customer Information and Reporting Safety Defects Warranty Outside Canada Government regulations in Canada require that automobiles meet specific emission regulations and safety regulations. Therefore, vehicles built for use in Canada may differ from those sold in other countries. The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries. We strongly recommend that you NOT take your Mazda outside Canada.
Customer Information and Reporting Safety Defects Warranty Registering Your Vehicle in A Foreign Country (Except United States and Canada) Government regulations in your country could require that automobiles meet specific emission and safety standards. Vehicles built for your country may differ from those built for other countries. In addition to registration problems, satisfactory service may be difficult or even impossible in another country. The fuel specified for your vehicle may be unavailable.
Customer Information and Reporting Safety Defects Warranty Add-On Non-Genuine Parts and Accessories Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by Mazda for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicle's performance or safety system; the Mazda warranty doesn't cover this.
Customer Information and Reporting Safety Defects Cell Phones Cell Phones Warning WARNING Use of Cell Phones and Other Devices by Driver: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a number on a cell phone while driving also ties-up the driver's hands. Use of these devices will cause the driver to be distracted and could lead to a serious accident.
Customer Information and Reporting Safety Defects Type Approval of Equipment Type Approval of Equipment Immobilizer system 9-15
Customer Information and Reporting Safety Defects Uniform Tire Quality Grading System (UTQGS) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. National Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature performance. qTread Wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course.
Customer Information and Reporting Safety Defects Uniform Tire Quality Grading System (UTQGS) WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
Customer Information and Reporting Safety Defects Reporting Safety Defects Reporting Safety Defects (U.S.A.) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor Corporation (Your Mazda Importer/Distributor).
Customer Information and Reporting Safety Defects Reporting Safety Defects Reporting Safety Defects (Canada) Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330 Sparks Street, Ottawa ON K1A 0N5. For additional road safety information, please visit the Road Safety website at: http://www.tc.gc.
Customer Information and Reporting Safety Defects Service Publications Service Publications Factory-authorized Mazda service publications are available for owners who wish to do some of their own maintenance and repair. When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below. If they don't have what you need in stock, they can order it for you. PUBLICATION ORDER NUMBER 9999-95-063B-05 9999-95-039G-05 9999-95-078C-05 (U.S.A.
10 Specifications Technical information about your Mazda. Identification Numbers ............................................................... 10-2 Vehicle Information Labels ..................................................... 10-2 Specifications ............................................................................... 10-4 Specifications ..........................................................................
Identification Numbers Vehicle Information Labels qVehicle Emission Control Information Label qVehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the left top side of the dashboard. This plate can easily be seen through the windshield.
Identification Numbers qEngine Number (3.
Specifications Specifications qEngine Specification 2.3-liter engine 3.0-liter engine DOHC-16V in-line, 4-cylinder DOHC-24V 60°V, 6-cylinder 87.5 × 94.0 mm (3.44 × 3.70 in) 89.0 × 79.5 mm (3.50 × 3.13 in) 2,261 ml (2,261 cc, 137.9 cu in) 2,967 ml (2,967 cc, 181.0 cu in) 9.7 10.0 Item Type Bore×Stroke Displacement Compression ratio qElectrical System Item Battery 2.3-liter engine 3.0-liter engine Alternator Starter 2.3-liter engine 3.0-liter engine 2.3-liter engine 3.
Specifications qCapacities (Approximate Quantities) Item Engine oil Coolant Manual transaxle oil Automatic transaxle fluid With oil filter replacement 2.3-liter Without oil filter engine replacement With oil filter replacement 3.0-liter Without oil filter engine replacement 2.3-liter engine 3.0-liter engine 2.3-liter engine 3.0-liter engine 2.3-liter engine 3.0-liter engine Fuel tank L 4.3 Unit US qt 4.5 Imp qt 3.8 3.9 4.1 3.4 5.7 6.0 5.0 5.2 5.5 4.6 7.0 8.5 2.87 2.3 7.2 7.0 7.4 9.0 3.0 2.
Specifications qWeights GVWR (Gross Vehicle Weight Rating) Item Sedan 5-Door/Sport Wagon Front Rear Front Rear Sedan GAWR (Gross Axle Weight Rating) 5-Door/Sport Wagon Weight 1,956 kg (4,312 lb) 2,037 kg (4,491 lb) 1,071 kg (2,361 lb) 888 kg (1,958 lb) 1,076 kg (2,372 lb) 961 kg (2,119 lb) qAir Conditioner Gas complies with SAE J639 HFC134a (R-134a) Maximum operating charge 0.5 kg (17.
Specifications Interior light Category Light bulb Wattage 3 5 5 1.2 5 10 Trunk light (Sedan) Overhead light/Map lights Courtesy lights Vanity mirror lights Luggage compartment light 5-Door Sport Wagon ECE R ― W5W W5W ― ― ― qTires NOTE The tires have been optimally matched with the chassis of your vehicle. When replacing tires, Mazda recommends that you replace tires of the same type originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer.
10-8
11 Index 11-1
Index A B Accessory Socket .............................. 6-55 Add-On Non-Genuine Parts and Accessories ....................................... 9-13 Air Bag Systems ............................... 2-44 Air Filter ............................................ 8-21 Ambient Temperature Display .......... 6-47 Antenna ............................................. 6-16 Anti-Lock Brake System (ABS) ......... 5-7 Warning light ............................... 5-7 Appearance Care ...............................
Index D F Dashboard Illumination .................... 5-26 Daytime Running Lights ................... 5-39 Defroster Rear window .............................. 5-42 Dimensions ....................................... 10-5 Door Locks ......................................... 3-7 Driving In Flooded Area ................... 4-10 Driving Tips ........................................ 4-7 Automatic transaxle ................... 5-15 Break-in period ............................ 4-7 Driving in flooded area .......
Index H J Headlights Control ....................................... 5-38 Flashing ...................................... 5-38 High-low beam .......................... 5-38 On reminder ............................... 5-38 HomeLink Wireless Control System .............................................. 5-44 Hood Release .................................... 3-26 Horn .................................................. 5-43 Jump-Starting .................................... 7-17 I Ignition Keys .............
Index O S Odometer and Trip Meter .................. 5-24 Outside Mirrors ................................. 3-34 Overhead Console ............................. 6-51 Overhead Lights ................................ 6-44 Overheating ....................................... 7-14 Overloading ...................................... 4-10 Seat Belt System 3-point type ................................ 2-19 Automatic locking ...................... 2-18 belt minder .................................
Index S T Storage Compartments ...................... 6-51 Cargo securing loops .................. 6-53 Cargo sub-compartment ............. 6-54 Center box .................................. 6-52 Center console ............................ 6-52 Glove box ................................... 6-52 Overhead console ....................... 6-51 Storage box ................................ 6-53 Storage pocket ............................ 6-52 Storage Pocket .................................. 6-52 Sunshade .....
Index W Windshield Wipers ............................ 5-41 Blades replacement .................... 8-23 Winter Driving ....................................
11-8