J94S.book Page 1 Saturday, June 23, 2001 1:04 PM A Word to Mazda Owners Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete customer satisfaction in mind. To help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommendations. An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is necessary, that's the place to go.
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM How to Use This Manual We want to help you get the most driving pleasure from your vehicle. Your owner’s manual, when read from cover to cover, can do that in many ways. Illustrations complement the words of the manual to best explain how to enjoy your Mazda. By reading your manual, you can find out about the features, important safety information, and driving under various road conditions.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Table of Contents Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems. Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Before Driving Your Mazda Important information about driving your Mazda.
J94S.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 1 Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Dashboard Overview .................................................................. 1- 2 Interior Overview ........................................................................ 1- 3 Exterior Overview ....................................................................... 1- 4 1-1 Form No.
J94S.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Your Vehicle at a Glance Interior Overview Sunvisors (page 6-44) Seat belts (page 2-9) Interior light (page 6-37) Rearview mirror (page 3-22) Vanity mirror (page 6-44) Side air bags (page 2-25) Front seats (page 2-2) 1-3 Form No.
J94S.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems. Seats .............................................................................................. 2- 2 Front Seats ............................................................................... 2- 2 Rear Seat .................................................................................. 2- 6 Seat Belt Systems ..........
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seats Front Seats ▼ Seat Slide (Manually operated model) (Manually operated model) WARNING WARNING Securing the Seats: Adjustable seats and seatbacks that are not securely locked are dangerous. In a sudden stop or collision, the seat or seatback could move, causing injury. Make sure the adjustable components of the seat are locked in place by attempting to slide the seat forward and backward and rocking the seatback.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seats (Electrically operated model) To slide the seat, move the slide lifter switch on the outside of the seat to the front or back and hold it. Release the switch at the desired position. ▼ Seat Recline WARNING Reclining: Sitting in a reclined position while the vehicle is moving is dangerous because you don’t get the full protection from seat belts.
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seats To change the seatback angle, lean forward slightly while raising the lever. Then lean back to the desired position and release the lever. ▼ Seat Tilt (Driver’s Seat) (Manually operated model) The seat-bottom angle can be adjusted by rotating the dial. Up Down Lever Dial Make sure the lever returns to its original position and the seatback is locked in place by attempting to push it forward and backward.
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seats Rear height adjustment Raise or lower the back of the switch to adjust the rear height of the seat-bottom. ▼ Head Restraint WARNING Head Restraints Adjustment: Driving with the head restraints adjusted too low or removed is dangerous. With no support behind your head, your neck could be seriously injured in a collision.
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seats Rear Seat WARNING Stacking Cargo: Stacking luggage or other cargo higher than the seatbacks, and putting things on the rear package tray is dangerous. During sudden braking or a collision, objects can become projectiles that may hit and injure passengers. Don’t stack things higher than the seatbacks or put things on the rear package tray.
J94S.book Page 7 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seats WARNING Children and the Folding Rear Seats: Playing with the folding rear seats is dangerous. Once the seats are back up, a child in the trunk would not be able to get out the way they had entered. If you have small children, keep the seatbacks locked. Do not give the car keys to children and do not allow them to play in the vehicle.
J94S.book Page 8 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seats ▼ Armrest The armrest can be used or placed upright. 2-8 Form No.
J94S.book Page 9 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use. The driver’s seat belt has no provisions for child-restraint systems and has only an emergency locking mode.
J94S.book Page 10 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems WARNING One Belt, One Passenger: Using one seat belt for more than one person at a time is dangerous. A seat belt used in this way can’t spread the impact forces properly and the two passengers could be crushed together and seriously injured or even killed. Never use one belt for more than one person at a time.
J94S.book Page 11 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems ▼ Automatic Locking Mode Always use the automatic locking mode to keep the child-restraint system from shifting to an unsafe position in the event of an accident. To get the seat belt into the automatic locking mode, pull it all the way out and connect it as instructed on the child-restraint system. It will retract down to the child-restraint system and stay locked on it.
J94S.book Page 12 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems 3-Point Type Seat Belt NOTE When using the rear center seat belt, refer to "Rear Center Position Seat Belt" (page 2-14). ▼ Fastening the Seat Belts 1. Grasp the buckle and tongue. 2. Slowly pull out the lap/shoulder belt. Belt WARNING Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous.
J94S.book Page 13 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems ▼ Unfastening the Seat Belts Depress the button on the buckle. WARNING Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous. An improperly positioned belt will provide little or no protection in a collision.
J94S.book Page 14 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems Rear Center Position Seat Belt Before using the rear-center lap/shoulder belt make sure tongue (A) and anchor buckle (B) are fastened. (A) (B) ▼ Fastening the Seat Belt 1. Grasp the buckle (D) and tongue (C). 2. Slowly pull out the lap/shoulder belt. 3. Insert the tongue (C) into the buckle (D) until you hear a click. (C) (D) (A) (B) 2-14 Form No.
J94S.book Page 15 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems 4. Make sure the shoulder belt is snugly fitted against your body. WARNING Positioning the Lap Portion of the Seat Belt: The lap portion of the seat belt worn too high is dangerous. In a collision, this would concentrate the impact force directly on the abdominal area, causing serious injury. Wear the lap portion of the belt snugly and as low as possible.
J94S.book Page 16 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems Seat Belt Extender If your seat belt is not long enough, even when fully extended, a seat belt extender may be available to you at no charge from your Authorized Mazda Dealer. This extender will be only for you and for the particular vehicle and seat. Even if it plugs into other seat belts, it may not hold in the critical moment of a crash.
J94S.book Page 17 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Seat Belt Systems Seat Belt Warning Light/ Beep If the driver’s seat belt is not fastened when the ignition switch is turned to the ON position, a beep will sound for about 6 seconds and the seat belt warning light will remain on until the belt is fastened. If the system does not operate correctly, consult an Authorized Mazda Dealer. 2-17 Form No.
ami02.fm Page 18 Wednesday, February 13, 2002 4:49 PM Essential Safety Equipment Child Restraint Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children small enough to use them. You are required by law to use a child-restraint system for children in the U.S. and Canada. Check your local and state or provincial laws for specific requirements regarding the safety of children riding in your vehicle.
J94S.book Page 19 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Child Restraint WARNING Proper Size of Child-Restraint System: For effective protection in vehicle accidents and sudden stops, a child must be properly restrained using a seat belt or child-restraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident.
J94S.book Page 20 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Child Restraint WARNING Children and Seating Position with Side Air Bag: Allowing anyone to lean over or against the front door is dangerous. If the vehicle is equipped with side air bags, the impact of an inflating side air bag could cause serious injury or death to the person.
J94S.book Page 21 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Child Restraint Installing Child-Restraint Systems Accident statistics reveal that a child is safer in the rear seat. The front passenger’s seat is clearly the worst choice for any child under 12, and with rear-facing child-restraint systems it is clearly unsafe due to air bags. Some child-restraint systems now come with tethers and therefore must be installed on the seats that take tethers to be effective.
J94S.book Page 22 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Child Restraint 3. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. Clicking from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step. 4.
J94S.book Page 23 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Child Restraint ▼ If You Must Use the Front Seat for Children If you cannot put all children in the rear seat, at least put the smallest in the rear seat and be sure the largest child up front uses the shoulder belt over the shoulder. Do not put rear-facing child-restraint systems on the front passenger’s seat.
J94S.book Page 24 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment Child Restraint WARNING Children and Seating Position with Side Air Bag: Allowing anyone to lean over or against the front door is dangerous. If the vehicle is equipped with side air bags, the impact of an inflating side air bag could cause serious injury or death to the person.
J94S.book Page 25 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags Supplemental Restraint Systems (SRS) Precautions Read this owner’s manual carefully to verify what air bags (driver-side air bag, passengerside air bag, side air bags) are equipped in your vehicle. The front and side supplemental restraint systems (SRS) include 4 air bags.
J94S.book Page 26 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags WARNING Air Bags without Seat Belts: Depending only on the air bags for protection during an accident is dangerous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only during a frontal, side or near-frontal collision of at least moderate force. Vehicle occupants should always wear seat belts.
J94S.book Page 27 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags WARNING Seating Position with Side Air Bags: Sitting too close to the side air bag storage compartments or placing hands on them is extremely dangerous. A side air bag inflates with great force and speed directly out of the outboard shoulder of the front seat and expands along the front door on the side the car is hit.
J94S.book Page 28 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags WARNING Suspension Adjustment: Adjusting the vehicle suspension is dangerous. If the vehicle’s height or the suspension is changed, the vehicle will be unable to accurately detect a collision resulting in incorrect or unexpected air bag deployment and the possibility of serious injuries.
J94S.book Page 29 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags Air Bag System Description The supplemental restraint systems (SRS) have two basic subsystems: • The air bag system with inflators and air bags. • The electric system with crash sensors and diagnostic module. The air bags are mounted in the following locations: the center of the steering wheel, the passenger-side of the dashboard, and in the outboard sides of the front seatbacks.
J94S.book Page 30 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags ▼ Air Bag Activation/Deactivation Front air bag activation A greater than moderate impact will cause the front air bags to inflate in the following cases: Hitting a solid wall straight on at greater than about 22 km/h (14 mph). Frontal impact within about a 30 degree range from head-on to the vehicle. Hitting a curb, pavement edge or hard object. Driving into a big hole or hitting the far side of a hole.
J94S.book Page 31 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags Limitations to front air bag activation Depending on the severity of impact, the front air bags may not inflate in the following cases: Impacts involving trees or poles cause severe cosmetic damage but may not have enough impact to activate the air bag. Rear-ending or running under a truck's tail gate may not provide the stopping force necessary for air bag deployment.
J94S.book Page 32 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags Non-activation of front air bags Front air bags will not normally inflate in the following cases: Collision from the rear. Vehicle roll-over, may deploy the side air bag(s) but not the front air bags. Impact to the side, but it may deploy a side air bag.
J94S.book Page 33 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags Limitations to side air bag activation Depending on the severity of impact, a side air bag may not inflate in the following cases: Frontal offset impact may not provide enough side impact to deploy a side air bag. Vehicle roll-over may not provide enough side force to deploy the side air bags. Side impacts involving trees or poles can cause severe cosmetic damage but may not have enough impact force to activate.
J94S.book Page 34 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags ▼ Constant Monitoring The following components of the air bag systems are monitored by a diagnostic system: • SAS unit • Air bag modules • Side air bag crash sensor • Related wiring A diagnostic module continuously monitors the systems’ readiness. This begins when the ignition switch is turned to the ON position and continues while the vehicle is being driven.
J94S.book Page 35 Saturday, June 23, 2001 1:04 PM Essential Safety Equipment SRS Air Bags WARNING Damaged Air Bag Sensors: Driving with damaged air bag sensors is dangerous. A collision, even one not strong enough to inflate the air bags, could damage the sensors. If there was a subsequent collision, a damaged sensor would not inflate the air bags. Always have an Authorized Mazda Dealer inspect the air bag systems after a collision.
J94S.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 3 Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Doors and Locks .......................................................................... 3- 2 Keys ......................................................................................... 3- 2 Door Locks .............................................................................. 3- 3 Keyless Entry System ................................
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks Keys Your Mazda has two kinds of keys: primary and secondary. Without immobilizer system WARNING Primary key Keys and Children: Leaving children in a vehicle with the ignition key is dangerous. This could result in someone being badly injured or even killed. They could play with power windows or other controls, or even make the vehicle move. Don’t leave the keys in your vehicle with children.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks If you must leave your vehicle with another person, such as a parking attendant, protect items by locking the glove box and trunk lid with the primary key. Keep that key and give the other person only the secondary key. A code number is stamped on the plate attached to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key.
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks ▼ Locking, Unlocking with Key Either front door can be locked or unlocked with a key. Turn the key toward the front to unlock, toward the back to lock. To lock any door with the door-lock button from the outside, push its doorlock button and close the door. Lock Unlock Lock NOTE ▼ Locking, Unlocking with DoorLock Button To lock any door from the inside, push its door-lock button. To unlock, pull it out.
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks ▼ Rear Door Child Safety Lock This lock is intended to help prevent children from accidentally opening the rear doors. Use it whenever a child rides in the vehicle. If you slide the child safety lock to the lock position before closing that door, the door cannot be opened from the inside. The door can be opened only by lifting the outside handle.
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks ▼ Transmitter Unlock button Unlock button Lock button To unlock the driver’s door, press the button. To unlock all the doors, press the button again within 5 seconds. Trunk button To open the trunk, press the button. ▼ Maintenance Trunk button CAUTION NOTE This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada.
J94S.book Page 7 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks 2. Pull the battery out. 3. Put in the new battery (CR2032 or the equivalent) with the positive pole ( ) facing down. Power Windows The ignition switch must be in the ON position for the power windows to operate. WARNING Slot 4. Align the front and back covers and snap the transmitter shut. ▼ Service Closing Power Windows: Closing power windows are dangerous.
J94S.book Page 8 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks ▼ Operating the Driver’s Side Power Window To open the window, push down the switch. To close the window, pull up the switch. To open the window, push down the switch. To close the window, pull up the switch. Close Left front window Close Open AU Open TO ▼ Power Window Lock Switch Auto-opening To fully open the window automatically, push the switch completely down.
J94S.book Page 9 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks WARNING Unintentional Window Operation: Unintentional window operation is dangerous. A person’s hands, head, or neck could be caught by the window and result in serious injury. Unless a passenger needs to operate a window, keep the power window lock switch in the locked position. Hood ▼ Opening the Hood 1. With the vehicle parked, pull the release handle to unlock the hood. 2. Pull the safety catch up and lift the hood.
J94S.book Page 10 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks 3. Use the support rod to hold the hood open. Support rod Clip Before closing the hood, secure the rod in its clip. Trunk Lid WARNING Open Trunk and Exhaust Gas: Exhaust gas in the cabin of a vehicle is dangerous. This gas contains CO (carbon monoxide), which is colorless, odorless, and highly poisonous. If inhaled, it can cause loss of consciousness and death.
J94S.book Page 11 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks ▼ Remote Trunk Lid Release To release the trunk lid from inside the vehicle, push the button. To cancel the security feature, insert the primary key into the lock, turn the key clockwise to open the trunk, and push the right side of the trunk-lock switch. Unlock Lock ▼ Trunk Security ▼ Trunk Light In some situations you may want to prevent the trunk from being opened with the remote trunk lid release button.
J94S.book Page 12 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks Trunk Release Handle Your vehicle is equipped with a trunk release handle that provides a means of escape for children and adults in the event they become locked inside the trunk. No matter how careful adults might be with keys and locking their cars, parents should be aware that children may be tempted to play around vehicles and use the trunk as a hiding place.
J94S.book Page 13 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks ▼ Opening the Trunk Lid from the Inside Pull the illuminated "T" shaped handle. The handle is made of material that will glow for hours in the darkness of the trunk following a brief exposure to ambient light. CAUTION Always keep the handle firmly attached to the holder and in the recessed position. Not securing the handle this way could allow it to snag luggage in the trunk and open the trunk lid.
J94S.book Page 14 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks Fuel-Filler Lid and Cap ▼ Fuel-Filler Lid To open, pull up the remote fuel-filler lid release. WARNING Fuel Spray: Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness when ingested. Fuel spray is released when there is pressure in the fuel tank and the fuel cap is removed too quickly. When removing the fuel cap, loosen the cap slightly and wait for any hissing to stop. Then remove it.
J94S.book Page 15 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks CAUTION Make sure the fuel-filler cap is tightened securely. The check engine light comes on when the cap isn’t tightened securely. If the light remains on (even after you have tightened the cap securely, driven, and restarted the engine several times), it may indicate a different problem. Contact an Authorized Mazda Dealer as soon as possible.
J94S.book Page 16 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Doors and Locks To close, push the front of the tilt switch. NOTE After washing your Mazda or after a rain, wipe the water off the sunroof before operating it. ▼ Slide Operation To open to any position, press the rear of the slide switch located on the right side of the overhead console. To close, press the front of the slide switch. Tilt up Close ▼ Sunshade The sunshade can be opened and closed by hand.
J94S.book Page 17 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Security System Immobilizer System The optional immobilizer system allows the engine to start only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent the theft of your vehicle. If the immobilizer system is working properly, the light will come on when the ignition switch is turned to the ON or START position.
J94S.book Page 18 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Security System ▼ Maintenance If you have a problem with the immobilizer system or the key, consult an Authorized Mazda Dealer. CAUTION • To avoid damage to the key, do not: • Drop the key. • Get the key wet. • Expose the key to any kind of magnetic field. • Expose the key to high temperatures on places such as the dashboard or hood, under direct sunlight.
J94S.book Page 19 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Security System Theft-Deterrent System The optional theft-deterrent system is designed to prevent your vehicle or its contents from being stolen when all the doors, hood, and trunk lid are locked. If forcible entry is attempted, the system sounds the horn and flashes the hazard warning lights and headlights. NOTE The theft-deterrent system has been designed to operate mainly with the keyless entry system transmitter.
J94S.book Page 20 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Security System 3. The indicator light flashes once every 3 seconds to indicate that the system is fully armed. It continues to flash until the theft-deterrent system is turned off. NOTE If you have any problem with the theftdeterrent system, consult an Authorized Mazda Dealer. ▼ Theft-Deterrent Labels ▼ To Turn off an Armed System An armed system can be turned off by pressing the button on the keyless entry system transmitter.
J94S.book Page 21 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Steering Wheel and Mirrors Steering Wheel WARNING Adjusting the Steering Wheel: Adjusting the steering wheel while the vehicle is moving is dangerous. Moving it can very easily cause the driver to abruptly turn to the left or right. This can lead to loss of control or an accident. Never adjust the steering wheel while the vehicle is moving.
J94S.book Page 22 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Steering Wheel and Mirrors 2. Depress the switch in the appropriate direction. Push the lever forward for day driving. Pull it back to reduce glare from headlights. Mirror adjusting switch Day/Night lever Day Night After adjusting the mirror, lock the control by rotating the switch to the middle position. Mirror defroster To turn on the mirror defroster, turn the ignition on and push the rear window defroster switch (page 5-35).
J94S.book Page 23 Saturday, June 23, 2001 1:04 PM Knowing Your Mazda Steering Wheel and Mirrors NOTE If your forward view is obstructed by the mirror or the sunvisor hits the mirror, adjust the mirror stay to the center-horizontal position. View from above Stay Side view Stay 3-23 Form No.
J94S.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 4 Before Driving Your Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ...................................... 4Fuel Requirements ................................................................... 4Emission Control System ........................................................ 4Engine Exhaust (Carbon Monoxide) ....................................... 4- 2 2 4 5 Before Starting the Engine ..........................
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Fuel and Engine Exhaust Precautions Fuel Requirements Vehicles with catalytic converters must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Fuel with a lower rating could cause the emission control system to lose effectiveness. It could also cause engine knocking and serious engine damage. Your Mazda will perform best with fuel listed in the table. Engine 2.5-liter engine 2.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Fuel and Engine Exhaust Precautions Gasoline blended with oxygenates such as alcohol or ether compounds are generally referred to as oxygenated fuels. The common gasoline blend that can be used with your vehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such as ethanol or methanol, may be marketed under the name "Gasohol".
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Fuel and Engine Exhaust Precautions Emission Control System Your vehicle is equipped with an emission control system (the catalytic converter is part of this system) that enables your vehicle to comply with existing exhaust emissions requirements. WARNING Parking Over Things That Burn: Parking over or near anything inflammable, such as dry grass, is dangerous.
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Fuel and Engine Exhaust Precautions Engine Exhaust (Carbon Monoxide) WARNING Carbon Monoxide: Engine exhaust is dangerous. This gas contains carbon monoxide (CO), which is colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness and death. If you smell exhaust gas inside your vehicle, keep all windows fully open and contact an Authorized Mazda Dealer immediately.
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Before Starting the Engine Before Getting In • Be sure the windows, outside mirror (s), and outside lights are clean. • Inspect inflation pressures and condition of tires. • Look under the vehicle for any sign of a leak. • If you plan to back up, make sure nothing will be in your way.
J94S.book Page 7 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Driving Tips Break-In Period Money-Saving Suggestions No special break-in is necessary, but a few precautions in the first 1,000 km (600 miles) may add to the performance, economy, and life of your Mazda. How you operate your Mazda determines how far it will travel on a tank of fuel. Use these suggestions to help save money on fuel and repairs. • Don’t race the engine. • Avoid long warm-ups.
J94S.book Page 8 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Driving Tips Hazardous Driving WARNING Downshifting on Slippery Surfaces: Downshifting into lower gear while driving on slippery surfaces is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident. If it is necessary to downshift on slippery surfaces, be very careful.
J94S.book Page 9 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Driving Tips Winter Driving • Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt. Ask a Mazda dealer to perform the following precautions: • Have the proper ratio of antifreeze in the radiator. • Inspect the battery and its cables. Cold reduces battery capacity. • Use only cold-weather engine oil (page 8-10).
J94S.book Page 10 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Driving Tips ▼ Tire Chains CAUTION • Chains may scratch or chip aluminum wheels. Install tire chains on steel wheels only. • Chains may affect handling. • Don’t go faster than 50 km/h (30 mph) or the chain manufacturer’s recommended limit, whichever is lower. • Drive carefully and avoid bumps, holes, and sharp turns. • Avoid locked-wheel braking.
J94S.book Page 11 Saturday, June 23, 2001 1:04 PM Before Driving Your Mazda Driving Tips Trailer Towing Overloading Never tow a trailer with your Mazda. WARNING Vehicle Load Weight: The gross axle weight rating (GAWR) and the gross vehicle weight rating (GVWR) of your vehicle are on the Motor Vehicle Safety Standard Label on the driver’s door frame. Exceeding these ratings can cause an accident or vehicle damage.
J94S.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 5 Driving Your Mazda Explanation of instruments and controls. Starting and Driving ................................................................... 5- 2 Ignition Switch ........................................................................ 5- 2 Starting the Engine .................................................................. 5- 3 Brake System ...........................................................................
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving Ignition Switch ▼ Ignition Switch Positions Automatic transaxle When turning the ignition switch to the LOCK position, keep the shift lever in P. ON(II) ACC(I) Shift lever LOCK(0) engaged in P (park) LOCK The steering wheel locks to protect against theft. Only in this position can the key be removed. Manual transaxle When turning the ignition switch to the LOCK position, push the key in at the ACC position.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving NOTE If turning the key is difficult, jiggle the steering wheel from side to side. ACC (Accessory) The steering wheel unlocks and some electrical accessories will operate. ON Starting the Engine NOTE Engine-starting is controlled by the spark ignition system. This system meets all Canadian Interference-Causing Equipment Standard requirements regulating the impulse electrical field strength of radio noise.
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving (Automatic transaxle) Put the vehicle in park (P). If you must restart the engine while the vehicle is moving, shift into neutral (N). NOTE The starter will not operate if the shift lever is not in P or N. 5. Turn the ignition switch to the START position and hold (up to 10 seconds at a time) until the engine starts. CAUTION Don’t try the starter for more than 10 seconds at a time.
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving Releasing the parking brake WARNING Driving with Wet Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected. Dry the brakes by driving very slowly and applying the brakes lightly until brake performance is normal.
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving Low brake fluid level warning ▼ Anti-Lock Brake System (ABS) If the light stays on after the parking brake is fully released, you may have a brake problem. The ABS control unit continuously monitors the speed of each wheel. If one is about to lock up, the ABS responds by automatically releasing and reapplying that wheel’s brake. Drive to the side of the road and park off the right-of-way.
J94S.book Page 7 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving ▼ ABS Warning Light ▼ Brake Pad Wear Indicator When the disc brake pads become worn, the built-in wear indicators contact the disc plates. This causes a screeching noise to warn that the pads should be replaced. The warning light stays on for a few seconds when the ignition switch is turned to the ON position.
J94S.book Page 8 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving Manual Transaxle Operation ▼ Manual Transaxle Shift Pattern Neutral position The shift pattern of the transaxle is conventional, as shown. Press the clutch pedal all the way down while shifting; then release it slowly. A safety feature prevents accidental shifting from 5 to reverse. The shift lever must be put in neutral before being shifted to reverse.
J94S.book Page 9 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving Automatic Transaxle Controls ▼ Transaxle Ranges The shift lever must be in P or N to operate the starter. P (Park) Lock-release button To prevent unsafe shifting P locks the transaxle and prevents the front wheels from rotating.
J94S.book Page 10 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving WARNING Shifting from N or P: It’s dangerous to shift from N or P into a driving gear when the engine is running faster than idle. If this is done, the vehicle could move suddenly, causing an accident or serious injury. If the engine is running faster than idle, don’t shift from N or P into a driving gear. D is the normal driving position.
J94S.book Page 11 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving ▼ Overdrive To turn it on, push the button again. Overdrive operation Shift patterns with overdrive: In D, the transaxle automatically shifts to overdrive, which improves fuel economy and reduces noise. To allow engine braking when going down a steep grade, make sure the overdrive button is in the off position.
J94S.book Page 12 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving ▼ Driving Tips Power Steering Passing For extra power when passing another vehicle or climbing steep grades, depress the accelerator fully. The transaxle will shift to a lower gear, depending on vehicle speed. Climbing steep grades from a stop To climb a steep grade from a stopped position: 1. Depress the brake pedal. 2. Shift to D or 1, depending on the load weight and grade steepness. 3.
J94S.book Page 13 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving Cruise Control With cruise control, you can set and automatically maintain any speed of more than about 40 km/h (25 mph). ▼ Activation/Deactivation To activate the system, push the CRUISE MAIN switch. To deactivate the system, push the OFF end.
J94S.book Page 14 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving ▼ To Set Speed ▼ To Increase Cruising Speed 1. Turn on the CRUISE MAIN switch. Follow either of these procedures. 2. Accelerate to the desired speed, which must be more than 40 km/h (25 mph). • Press the RESUME/ACCEL button and hold it. Your vehicle will accelerate. Release the button at the speed you want. 3. Press the SET/COAST button and release it at the speed you want.
J94S.book Page 15 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving NOTE Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with it or change the set speed. Take your foot off the accelerator to return to the set speed. ▼ To Decrease Cruising Speed Press the SET/COAST button and hold it. The vehicle will gradually slow. Release the button at the speed you want.
J94S.book Page 16 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving ▼ To Cancel To turn off the system, use one of these methods: • Push the OFF end of the CRUISE MAIN switch. • Slightly depress the brake pedal. • (Manual transaxle) Depress the clutch pedal. The system is off when the ignition is off. NOTE Cruise control will cancel at about 15 km/h (9 mph) below the preset speed or below 40 km/h (25 mph).
J94S.book Page 17 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving ▼ TCS Warning Light ▼ TCS OFF Indicator Light This warning light stays on for a few seconds when the ignition switch is turned to the ON position. It flashes when the system regulates engine torque. This light comes on when the ignition switch is turned to the ON position. It goes off when the engine is started. It also comes on when you switch off the traction control system or when the system has a malfunction.
J94S.book Page 18 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Starting and Driving NOTE • If the TCS is off when the engine is turned off, it automatically activates when the ignition switch is turned on. • Leaving the TCS on will provide the best traction. 5-18 Form No.
J94S.book Page 19 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Instrument Cluster and Indicators Meters and Gauges 1 2 3 4 5 Speedometer .............................................................................................................5-20 Odometer and Trip Meter .........................................................................................5-20 Tachometer ...............................................................................................................
J94S.book Page 20 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Instrument Cluster and Indicators ▼ Speedometer Odometer The speedometer indicates the speed of the vehicle. When this mode is selected, ODO will be displayed. The odometer records the total distance the vehicle has been driven. ▼ Odometer and Trip Meter The ignition switch must be in the ON position. The display mode can be changed from odometer to trip meter A to trip meter B and then back to odometer by pressing the selector.
J94S.book Page 21 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Instrument Cluster and Indicators ▼ Engine Coolant Temperature Gauge NOTE • Only the trip meters record tenths of kilometers (miles). • The trip record will be erased when; • The power supply is interrupted (blown fuse or the battery is disconnected). • The vehicle is driven over 999.9 km (mile). The engine coolant temperature gauge shows the temperature of the engine coolant.
J94S.book Page 22 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Instrument Cluster and Indicators ▼ Fuel Gauge The fuel gauge shows approximately how much fuel is in the tank. We recommend keeping the tank over 1/4 full. When the low fuel warning light illuminates or when the needle is near E, refuel as soon as possible. Warning light ▼ Dashboard Illumination When the parking lights or headlights are on, rotate the thumb-wheel to adjust the brightness of the dashboard lights.
J94S.book Page 23 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps Warning/Indicator Lights Warning/Indicator lights will appear in any of the highlighted areas Signal Warning/Indicator Lights Page Brake System Warning Light 5-25 Seat Belt Warning Light 5-25 Charging System Warning Light 5-26 Engine Oil Pressure Warning Light 5-26 TCS Warning Light 5-27 Low Fuel Warning Light 5-27 Low Washer Fluid Level Warning Light 5-27 5-23 Form No.
J94S.
J94S.book Page 25 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps ▼ Brake System Warning Light This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the ignition switch in the START or ON position. It goes off when the parking brake is fully released. Low brake fluid level warning WARNING Brake Warning Light: Driving with the brake system warning light on is dangerous.
J94S.book Page 26 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps ▼ Charging System Warning Light This warning light indicates a malfunction of the alternator or of the charging system. ▼ Engine Oil Pressure Warning Light This warning light indicates low engine oil pressure. If the light comes on while driving: 1. Drive to the side of the road and park off the right-of-way. 2. Turn off the engine. Inspect the alternator drive belt for looseness and breakage. 3.
J94S.book Page 27 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps ▼ TCS Warning Light This warning light stays on for a few seconds when the ignition switch is turned to the ON position. It flashes when the system regulates engine torque. If the light stays on, take your vehicle to an Authorized Mazda Dealer. The traction control system may have a malfunction.
J94S.book Page 28 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps If the check engine light flashes continuously, decrease your speed and consult an Authorized Mazda Dealer as soon as possible. ▼ Door-Ajar Warning Light NOTE When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light comes on. This is due to a weak battery, not a malfunction. Recharge the battery.
J94S.book Page 29 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps ▼ Immobilizer System Warning/ Security Indicator Light ▼ Headlight High-Beam Indicator Light Immobilizer system warning light This light indicates one of two things: When the key is in the ignition switch, this light serves as the immobilizer system warning light. • The high-beam headlights are on.
J94S.book Page 30 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps ▼ O/D OFF Indicator Light ▼ TCS OFF Indicator Light This light comes on when the overdrive has been turned off. This light comes on when the ignition switch is turned to the ON position. It goes off when the engine is started. It also comes on when you switch off the traction control system or when the system has a malfunction.
J94S.book Page 31 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps Beeps ▼ Ignition Key Reminder If the ignition switch is in the LOCK or ACC position, a beep will sound when any door is opened. ▼ Lights-On Reminder If lights are on and the key is removed from the ignition switch, a beep will sound when any door is opened. 5-31 Form No.
J94S.book Page 32 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Switches and Controls ▼ Lights-On Reminder Lighting Control If lights are on and the key is removed from the ignition switch, a beep will sound when any door is opened. ▼ Headlight High-Low Beam Push the lever forward for high beams. Pull it back for low. High beams ▼ Headlights To turn on the lights, turn the knob on the end of the control lever.
J94S.book Page 33 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Switches and Controls Turn and Lane-Change Signals Daytime Running Lights ▼ Turn Signal In Canada, vehicles must be driven with the headlights on during daytime operation. Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.
J94S.book Page 34 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Switches and Controls Windshield Wipers and Washer The ignition switch must be in the ON position. ▼ Windshield Wipers OFF INT WARNING Frozen Washer Fluid: Using windshield washer fluid in freezing temperatures is dangerous. The washer fluid could freeze on the windshield and block your vision. You could have an accident. Don’t use the washer without first warming the windshield. 1 2 Turn the wipers on by pulling the lever down.
J94S.book Page 35 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Switches and Controls One-touch wipers For a single wiping cycle, push the lever up to MIST. Rear Window Defroster The rear defroster clears frost, fog, and thin ice from the rear window. The ignition switch must be in the ON position. Push the switch to turn on the rear window defroster; the indicator light will come on. Push the switch again to turn it off.
J94S.book Page 36 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Switches and Controls Horn To sound the horn, press around the mark of the steering wheel. Hazard Warning Flasher The hazard warning lights should always be used when you stop on or near a roadway. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it. Depress the hazard warning switch and all four turn signals will flash at once.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audio system. Climate Control System .............................................................. 6Operating Tips ......................................................................... 6Vent Operation ......................................................................... 6Manual Type ...........................................................................
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System Operating Tips ▼ Operating the Climate Control System Operate the climate control system with the engine running. ▼ Clearing the Air Inlet Clear all obstructions like leaves, snow and ice from the hood and the air inlet in the cowling grille to improve the system efficiency. ▼ Foggy Windows The windows may fog up easily in humid weather. Use the climate control system to defog the windows.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System Vent Operation Vent Open Close Knob ▼ Adjusting the Vents Directing airflow You can direct air flow by moving the adjustment knobs and vents. Adjusting the amount of airflow These vents can be opened by rotating the vertical wheels up or closed by rotating them down. NOTE When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System ▼ Selecting the Airflow Mode Dashboard Vents Defroster and Floor Vents Dashboard and Floor Vents Defroster Vents Floor Vents 6-4 Form No.
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System ▼ Oscillating Air Vent The air from the center ventilation vent can automatically be swung in both right and left directions. To turn on, push the switch in. Another push will turn it off. When the switch is turned off, the direction of airflow can manually be adjusted by the thumb wheel. NOTE When the switch is turned on, the vent always swings even when no air comes out from the center ventilation. 6-5 Form No.
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System Manual Type Fan control dial Mode selector switch Temperature control dial Air intake selector switch Mode selector switch Air conditioner switch ▼ Control Switches Temperature control dial Fan control dial Cold This dial allows variable fan speeds. 0—Fan off 1—Low speed 2—Medium low speed 3—Medium high speed 4—High speed 6-6 Form No.
J94S.book Page 7 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System Mode selector switch Air intake selector switch Press the mode selector switch to select airflow mode (page 6-4). This switch controls the source of air entering the vehicle. Air conditioner switch The switch should be kept in the outside air position under normal conditions. Press the switch to alternate between the two positions. The indicator light illuminates when the recirculated air position is selected.
J94S.book Page 8 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System WARNING The Recirculated Air Position: Using the recirculated air position in cold weather will cause the glass to fog up. Your vision will be hampered, which could lead to a serious accident. Do not use the recirculated air position in cold weather. ▼ Heating NOTE • If the windshield fogs up easily, set the mode selector switch to the position.
J94S.book Page 9 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System 5. Adjust the fan control dial and temperature control dial to maintain maximum comfort. ▼ Ventilation CAUTION When using the air conditioner while driving up long hills or in heavy traffic, closely monitor the temperature gauge (page 5-21). The air conditioner may cause engine overheating. If the gauge indicates overheating, turn the air conditioner off.
J94S.book Page 10 Saturday, June 23, 2001 1:04 PM Interior Comfort Climate Control System 1. Set the mode selector switch to the position. ▼ Dehumidifying (With Air Conditioner) 2. Set the temperature control dial to the desired position. 3. Set the fan control dial to the desired speed. WARNING Foggy Windshield: Using the position with the temperature control set to the cold position will cause the outside of the glass to fog up. Your vision will be hampered, which could lead to a serious accident.
J94S.book Page 11 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Antenna ▼ Rear Window Antenna The rear window antenna receives both AM and FM signals. CAUTION When washing the inside rear window, use a soft cloth dampened in lukewarm water, gently wiping the antenna lines. Use of glass cleaning products could damage the antenna. Operating Tips for Audio System ▼ Radio Reception AM characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere.
J94S.book Page 12 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signals cannot travel beyond the horizon. Therefore, FM stations cannot be received at the great distances possible with AM reception.
J94S.book Page 13 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Strong signal noise This occurs very close to a transmitter tower. The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver. Station drift noise When a vehicle reaches the area of two strong stations broadcasting at similar frequencies, the original station may be temporarily lost and the second station picked up. At this time there will be some noise from this disturbance.
J94S.book Page 14 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System • If the cassette tape is loose, it may produce poor sound or performance during playback. Use a pencil or something similar to remove any slack. • Only cassette tapes that play no longer than 90 minutes should be used. Cassette tape exceeding 90 minutes are thin and may easily break. • Do not leave a cassette tape in the tape player slot when not in use.
J94S.book Page 15 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System • Store MDs in their cases and away from direct sunlight. • Do not insert any objects, other than CDs, into the slot. • Do not insert fingers or foreign objects in the MD insertion slot as it could damage the MD deck.
J94S.book Page 16 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System • A new CD may have rough edges on its inner and outer perimeters. If a disc with rough edges is used, proper setting will not be possible and the CD player/changer will not play the CD. Remove the rough edges in advance by using a ball-point pen or pencil as shown below. To remove the rough edges, rub the side of the pen or pencil against the inner and outer perimeter of the CD.
J94S.book Page 17 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System • Do not insert cleaning discs in the CD player/changer. • Do not insert any disc with a peel-off or seal on it. 6-17 Form No.
J94S.book Page 18 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System 6-18 Form No.
J94S.book Page 19 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Audio Set CD Player In-dash CD Changer Cassette Tape Player Mini Disc (MD) Player Illustration is of a representative audio unit. Power/Volume/Sound Controls ............................................................................................. 6-20 Clock ..................................................................................................................................... 6-22 Operating the Radio ...
J94S.book Page 20 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System ▼ Power/Volume/Sound Controls Display Power/Volume knob Audio control knob Power ON/OFF Volume adjustment Turn the ignition switch to the ACC or ON position. To adjust the volume, turn the power/ volume knob. Press the power/volume knob to turn the audio system on. Press the power/volume knob again to turn the audio system off. Turn the power/volume knob to the right to increase volume, to the left to decrease it.
J94S.book Page 21 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Audio sound adjustment 1. Press the audio control knob to select bass, mid-range, treble, fade or balance control. The selected function will be indicated. NOTE About 5 seconds after selecting any mode, the volume function will be automatically selected. To reset bass, mid-range, treble, fade, and balance, press the audio control knob for 2 seconds. The unit will beep and "CL" will be displayed.
J94S.book Page 22 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System ▼ Clock Display Clock button Hour set button Minute set button Setting the time Exact hour adjustment The clock can be set at any time when the ignition switch is in the ACC or ON position. 1. To set the exact hour, press the clock button ( ) for about 2 seconds until a beep is heard. The clock’s current time will flash. 1. To adjust the time, press the clock button ( ) for about 2 seconds until a beep is heard.
J94S.book Page 23 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Changing the display mode The display on the unit can be changed by pressing the clock button ( ). This alternates the display between time and audio. When the clock mode has been selected, the time will be displayed. NOTE If audio operation is selected while the time mode is on, the selected audio mode will be displayed for ten seconds, then the display will revert to the time mode. 6-23 Form No.
J94S.book Page 24 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System ▼ Operating the Radio Band selector buttons Display Seek tuning: Higher frequency Scan button Lower frequency Auto memory button Channel preset buttons Radio ON Press a band selector button ( ) to turn the radio on. Manual tuning knob Tuning or Band selection Choose AM by pressing the AM button ( ) and FM by pressing the FM1/2 button ( ). The selected mode will be indicated.
J94S.book Page 25 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Seek tuning Pressing the seek tuning button ( , ) will cause the tuner to seek a higher or lower frequency automatically. NOTE If you continue to press and hold the button, the frequency will continue changing without stopping. Scan tuning Press the scan button ( ) to automatically sample strong stations. Scanning stops at each station for about 5 seconds.
J94S.book Page 26 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System ▼ Operating the Cassette Tape Player Display Cassette tape play button Fast-forward button APC button: (next program) (one being played) Rewind button Repeat button Dolby NR button Cassette tape eject button Program button Cassette tape insert Playing Insert the cassette tape into the slot, open edge to the right and cassette tape will begin play and "TAPE" will be displayed.
J94S.book Page 27 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System * Noise reduction system manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Ejecting the cassette tape Press the cassette tape eject button ( ) to eject the cassette tape. NOTE The cassette tape can be ejected when the ignition switch is in the OFF position.
J94S.book Page 28 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System ▼ Operating the Mini Disc (MD) Player Display MD play button Track up button Scan button Track down button Fastforward button MD slot MD eject button MD display Display button Repeat button Reverse button Random button Inserting the MD Fast-forward/Reverse Insert the MD, label-side up with the arrow pointed to the slot. The autoloading mechanism will set the MD and begin play.
J94S.book Page 29 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Music scan Changing the MD display This feature helps to find a program by playing about the first 10 seconds of each track. To change the MD display during MD play, press and hold the display button ( ) for about half a second to advance through each of the following displays: Press the scan button ( ) during play to start scan play operation (the track number will flash).
J94S.book Page 30 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System ▼ Operating the Compact Disc (CD) Player CD slot Disc-in indicator CD play button Display Fast-forward button CD eject button Track up button Scan button Track down button Reverse button Random button Repeat button Inserting the CD Fast-forward/Reverse Insert the CD into the slot, label-side up. The auto-loading mechanism will set the CD and begin play.
J94S.book Page 31 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Music scan This feature helps to find a program by playing about the first 10 seconds of each track. Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play. NOTE If the unit is left in scan, normal play will resume where scan was selected. Repeat play This feature makes it possible to listen to a selection repeatedly.
J94S.book Page 32 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System ▼ Operating the In-Dash CD Changer CD slot Disc-in indicator CD play button Display Fast-forward button Load button CD eject button Track up button Scan button Track down button Disc down button Reverse button Disc up button Random button Repeat button Power/Volume knob Inserting the CD Normal insertion The CD must be label-side up when inserting. The auto-loading mechanism will set the CD and begin play.
J94S.book Page 33 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Multiple ejection Multiple insertion 1. Press and hold the load button ( for about 2 seconds until a beep is heard. ) 2. When "In" is displayed, insert the CD. 3. When "In" is displayed again, insert the next CD. 1. Press and hold the CD eject button ( ) for about 2 seconds until a beep is heard. 2. Wait 5 seconds or press the CD eject button ( ) again within 5 seconds after the beep is heard. 3.
J94S.book Page 34 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Disc search Press the disc up button ( ) to skip forward to the beginning of the next CD. Press the disc down button ( ) to skip back to the beginning of the previous CD. Music scan This feature helps to find a program by playing about the first 10 seconds of each track. Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play.
J94S.book Page 35 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System ▼ Error Indications If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer. Indication Cause MD is inserted upside down CHECK MD MD is defective CHECK CD CD is inserted upside down CD is defective Solution Insert the MD properly.
J94S.book Page 36 Saturday, June 23, 2001 1:04 PM Interior Comfort Audio System Safety Certification This CD player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the U.S. Department of Health and Human Services. CAUTION • This CD player should not be adjusted or repaired by anyone except qualified service personnel. If servicing is required, contact an Authorized Mazda Dealer.
J94S.book Page 37 Saturday, June 23, 2001 1:04 PM Interior Comfort Interior Equipment Interior Lights ▼ Overhead light NOTE If any door is left opened, the light goes out after about 5 minutes. ON DOOR ▼ Map Lights The map lights are switched on or off by pressing the switches.
J94S.book Page 38 Saturday, June 23, 2001 1:04 PM Interior Comfort Interior Equipment ▼ Courtesy Light Lights on when any door is open. Accessories ▼ Accessory Socket The ignition switch must be in the ACC or ON position. Only use genuine Mazda accessories or the equivalent requiring no greater than 12V—10A. CAUTION Courtesy light To prevent accessory socket damage or electrical failure, pay attention to the following; • Don’t use accessories that require more than 12V—10A.
J94S.book Page 39 Saturday, June 23, 2001 1:04 PM Interior Comfort Interior Equipment Front accessory socket Rear accessory socket The front accessory socket is in the center panel. To use, open the cover. The rear accessory socket is in the center console box. To use, open the cover. The front accessory socket can be used for a lighter. If a lighter is needed, one can be purchased from your Authorized Mazda Dealer.
J94S.book Page 40 Saturday, June 23, 2001 1:04 PM Interior Comfort Interior Equipment 1. Using a coin, turn the cap counterclockwise (about 45° from the closed position) and remove it. 4. Make sure the plug cord is running through the cap slot, reinstall the cap and turn it clockwise (about 45° to the opened position). Cord 45 45 2. Open the tray by pulling the release catch. 3. Pass the plug cord through the hole of the tray and insert the plug in the socket. Release catch 6-40 Form No.
J94S.book Page 41 Saturday, June 23, 2001 1:04 PM Interior Comfort Interior Equipment Front cup holder The front cup holders are on the center console. To use, lift the covers. To open the rear cover, open the front first, then open the rear. Storage Compartments WARNING Open Storage Box: Driving with a storage box open is dangerous. To reduce the possibility of injury in an accident or a sudden stop, keep the storage boxes closed when driving.
J94S.book Page 42 Saturday, June 23, 2001 1:04 PM Interior Comfort Interior Equipment Without sunroof ▼ Center Pocket To open, unlatch the release catch. To open, push the release catch down and pull the lid downward. Release catch ▼ Storage Pocket To open, push the release catch down and pull the lid downward. ▼ Glove Box To open the glove box, pull the latch toward you. The door has a lock, insert the primary key and turn it clockwise to lock, counterclockwise to unlock.
J94S.book Page 43 Saturday, June 23, 2001 1:04 PM Interior Comfort Interior Equipment ▼ Center Console ▼ Rear-Armrest Box To open, pull the lower release catch. To open, pull the release catch. Small items can be placed in the tray of the center console lid. To open it, pull the upper release catch. 6-43 Form No.
J94S.book Page 44 Saturday, June 23, 2001 1:04 PM Interior Comfort Interior Equipment Type B Sunvisors When you need a sunvisor, lower it for use in front or swing it to the side. To use the vanity mirror, lower the sunvisor and pull the mirror cover up. The vanity mirror light will come on when you pull the cover up. Sunvisor Vanity mirror Vanity mirror light ▼ Vanity Mirrors Type A To use the vanity mirror, lower the sunvisor and pull the mirror cover up. Cover Vanity mirror 6-44 Form No.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 7 In Case of an Emergency Helpful information on what to do in an emergency. Parking in an Emergency ........................................................... 7- 2 Parking in an Emergency ......................................................... 7- 2 Flat Tire ........................................................................................ 7- 3 Spare Tire and Tool Storage ....................................................
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Parking in an Emergency Parking in an Emergency The hazard warning lights should always be used when you stop on or near a roadway. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it. Hazard warning flasher switch Depress the hazard warning switch and all four turn signals will flash at once.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Flat Tire Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram. Spare tire Jack Tool bag 7-3 Form No.
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Flat Tire ▼ Jack CAUTION To remove the jack Turn the wing bolt counterclockwise. To avoid damage to the temporary spare or to the vehicle, observe the following precautions: • Don’t exceed 80 km/h (50 mph). • Avoid driving over obstacles. Also, don’t drive through an automatic car wash. This tire’s diameter is smaller than a conventional tire’s, so the ground clearance is reduced about 25 mm (1 in).
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Flat Tire Changing a Flat Tire NOTE Make sure the jack is well lubricated before using it. NOTE If the following occurs while driving, it could indicate a flat tire. • Steering becomes difficult. • The vehicle begins to vibrate excessively. • The vehicle pulls in one direction. 1. Park on a level surface off the right-ofway and firmly set the parking brake. 2.
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Flat Tire ▼ Removing a Flat Tire 1. Pry off the wheel cover with the beveled end of the lug wrench. 2. Loosen the lug nuts by turning them counterclockwise one turn each, but don’t remove any until the tire has been raised off the ground. Wheel cover Lug wrench NOTE Force the end of the wrench firmly between wheel and cover, or removal will be difficult. 3.
J94S.book Page 7 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Flat Tire WARNING Incorrect Jacking Position: Attempting to jack the vehicle in positions other than those recommended in this manual is dangerous. The vehicle could slip off the jack and seriously injure or even kill someone. Use only the front and rear jacking positions recommended in this manual. Improper Jack: Using a jack that isn’t designed for your Mazda is dangerous.
J94S.book Page 8 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Flat Tire WARNING Removing Dirt and Grime from Wheels, Hubs and Hub Bolts: When changing or replacing a tire, not removing dirt and grim from the mounting surfaces of the wheel, hub and hub bolts is dangerous. The lug nuts could loosen while driving and cause the tire to come off, resulting in an accident. Make sure the mounting surfaces of the wheel, hub and lug nuts are clean before changing or replacing tires. 2.
J94S.book Page 9 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Flat Tire WARNING Loose Lug Nuts: Improperly or loosely tightened lug nuts are dangerous. The wheel could wobble or come off. This could result in loss of vehicle control and cause a serious accident. Always securely and correctly tighten the lug nuts. Metric Studs and Lug Nuts: Because the wheel studs and lug nuts on your Mazda have metric threads, using a non-metric nut is dangerous.
J94S.book Page 10 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Overheating Overheating If the temperature gauge indicates overheating, you experience power loss, or you hear a loud knocking or pinging noise, the engine is probably too hot. If this happens: 1. Drive safely to the side of the road and park off the right-of-way. 2. Put a vehicle with an automatic transaxle in park (P), a manual transaxle in neutral. Apply the parking brake. 3. Turn off the air conditioner.
J94S.book Page 11 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Overheating 2.5-liter engine Cooling system cap Engine coolant reservoir If you find no problems, the engine is cool, and no leaks are obvious, carefully add coolant as required (page 8-13). WARNING Cooling System Caps: When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury. Don’t remove either cooling system cap when the engine and radiator are hot.
J94S.book Page 12 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Emergency Starting Starting a Flooded Engine If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. Depress the accelerator all the way and hold it there. 2. Turn the ignition switch to the START position and hold it there—for up to 10 seconds. If the engine starts, release the key and accelerator immediately because the engine will suddenly rev up. 3.
J94S.book Page 13 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Emergency Starting 1. Make sure the booster battery is 12 V and that its negative terminal is grounded. 2. If the booster battery is in another vehicle, don’t allow the vehicles to touch. Turn off the engine of the vehicle with the booster battery and all unnecessary electrical loads in both vehicles. 3. Connect the jumper cables in the exact sequence as in the illustration.
J94S.book Page 14 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Emergency Starting Push-Starting WARNING Towing a Vehicle to Start It: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide. The occupants could be injured. Never tow a vehicle to start it. You can’t start a vehicle with an automatic transaxle by pushing it. CAUTION You shouldn’t push-start a vehicle that has a manual transaxle.
J94S.book Page 15 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Emergency Towing Towing Description We recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed. CAUTION Don’t tow the vehicle pointed backward with driving wheels on the ground. This may cause internal damage to the transaxle.
J94S.book Page 16 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Emergency Towing Tiedown Hooks CAUTION Don’t use the tiedown hooks under the front and rear for towing. They are designed ONLY for tying down the vehicle when it's being transported. Using them for towing will damage the bumper. ▼ Tiedown Hooks-Front ▼ Tiedown Hooks-Rear 7-16 Form No. 8Q50-EA-01G Recreational Towing An example of “ recreational towing ” is towing your vehicle behind a motorhome.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 8 Maintenance and Care How to keep your Mazda in top condition. Introduction ................................................................................. 8- 2 Introduction ............................................................................. 8- 2 Scheduled Maintenance .............................................................. 8- 3 Scheduled Maintenance ........................................................... 8- 3 Owner Maintenance .....
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Maintenance and Care Introduction Introduction Be extremely careful and prevent injury to yourself and others or damage to your vehicle when using this manual for inspection and maintenance. If you’re unsure about any procedure it describes, we strongly urge you to have a reliable and qualified service shop perform the work, preferably an Authorized Mazda Dealer. Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Maintenance and Care Scheduled Maintenance Scheduled Maintenance Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply. If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).
08.fm Page 4 Monday, June 25, 2001 5:12 PM Maintenance and Care Scheduled Maintenance ▼ Schedule 1 I : Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air filter cannot be cleaned using the air-blow method.
08.fm Page 5 Monday, June 25, 2001 5:12 PM Maintenance and Care Scheduled Maintenance ▼ Schedule 2 I : Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air filter cannot be cleaned using the air-blow method.
08.fm Page 6 Monday, June 25, 2001 5:12 PM Maintenance and Care Scheduled Maintenance I : Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air filter cannot be cleaned using the air-blow method.
J94S.book Page 7 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Owner Maintenance Schedule The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.
J94S.book Page 8 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Owner Maintenance Precautions Improper or incomplete service may result in problems. This section gives instructions only for items easy to perform. As explained in the Introduction (page 8-2), several procedure can be done only by a qualified service technician with special tools. Improper owner maintenance during the warranty period may affect warranty coverage.
J94S.book Page 9 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Engine Compartment Overview 2.0-liter engine Air filter Engine oil dipstick Brake/Clutch fluid reservoir Automatic transaxle fluid-level dipstick (only for automatic transaxle) Power steering fluid reservoir Windshield washer fluid reservoir Fuse block Engine coolant reservoir Battery Cooling system cap Engine oil-filler cap 2.
J94S.book Page 10 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance When choosing an oil, consider the temperature range your vehicle will operate in before the next oil change. Then select the recommended viscosity from this chart. Engine Oil ▼ Recommended Oil Oil container labels provide important information. CAUTION Using oils of viscosity besides those recommended for specific temperature ranges could result in engine damage.
J94S.book Page 11 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance ▼ Inspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. CAUTION Don’t add engine oil over F. This may cause engine damage. 2. Warm up the engine to normal operating temperature. 3. Turn it off and wait 5 minutes for the oil to return to the oil pan. 4. Pull out the dipstick, wipe it clean, and reinsert it fully. 2.0-liter engine 6.
J94S.book Page 12 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance 3. Replace the plug tightly after the oil has thoroughly drained. Changing engine oil WARNING Checking or Changing Engine Oil: Hot engine oil is dangerous. If the engine has been running, the engine oil becomes very hot. You could be seriously burned. Don’t check or change the engine oil when the engine is hot. 2.0-liter engine Loosen 4. Fill the engine with new oil to the F mark on the dipstick. 5.
J94S.book Page 13 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Engine Coolant ▼ Inspecting Coolant Level WARNING Hot Engine: A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot. You could be burned. Don’t inspect the coolant system or add coolant when the engine is hot.
J94S.book Page 14 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance For mixture percentage: Protection 1. Remove the cooling system cap. Volume Antifreeze Water solution Above −16°C (3°F) Above −26°C (−15°F) Above −40°C (−40°F) 35% 65% 45 55 55 45 2.0-liter engine Loosen Tighten Loosen To change coolant WARNING Removing the Cooling System Cap: Removing the cooling system cap or drain plug while the engine is running or hot is dangerous.
J94S.book Page 15 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance 5. Fill the radiator (to the top of the filler neck) and then the coolant reservoir (to F) with as much ethylene-glycol-based coolant and water as necessary to provide protection from freezing and corrosion. In extremely cold climates, add the amount recommended by the coolant manufacturer. 6. Reinstall the cooling system cap. 7. Run the engine at idle for about 10 minutes. 8.
J94S.book Page 16 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance ▼ Adding Brake/Clutch Fluid WARNING Spilled Brake Fluid: Spilled brake fluid is dangerous. If it gets in your eyes, they could be seriously injured. If this happens, immediately flush your eyes with water and get medical attention. Brake fluid spilled on a hot engine could cause a fire. Be careful not to spill brake fluid on yourself or on the engine.
J94S.book Page 17 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Power Steering Fluid ▼ Inspecting Power Steering Fluid Level 3. Remove the filler cap and attached dipstick. 4. Wipe them clean and put them back. 5. Remove again and inspect the level. 6. It must be between HIGH and LOW. Add fluid if necessary. CAUTION To avoid damage to the power steering pump, don’t operate the vehicle for long periods when the power steering fluid level is low. Don’t overfill.
J94S.book Page 18 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Automatic Transaxle Fluid (ATF) ▼ Inspecting Automatic transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. The volume of fluid changes with the temperature. Fluid must be checked at idle without driving at normal operating temperature.
J94S.book Page 19 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Scale B When the engine has not been running, and the outside temperature is above 10°C (50°F), the level should be between the bottom hole on the dipstick and the bottom of the crosshatched area on the dipstick. A B CAUTION • Use scale B only as a reference. • If outside temperature is lower than about 10°C (50°F), start the engine and inspect the fluid level after the engine reaches operating temperature.
J94S.book Page 20 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Fully insert the dipstick. When adding fluid, inspect with the dipstick to make sure it doesn’t pass full. Washer Fluid ▼ Inspecting Washer Fluid Level NOTE Inspect both sides of the dipstick for accurate reading. WARNING Substitute Washer Fluid: Using radiator antifreeze as washer fluid is dangerous.
J94S.book Page 21 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Body Lubrication All moving points of the body, such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather. Make sure the engine hood’s secondary latch keeps the hood from opening when the primary latch is released. Air Filter CAUTION Don’t drive without an air filter. This could result in excessive engine wear.
J94S.book Page 22 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance 2. Lift off the air filter cover and remove the filter. Wiper Blades CAUTION Air filter cover Hot waxes applied by automatic car washes have been known to affect the cleanability of windows. Air filter 3. Wipe inside the air cleaner housing with a damp cloth. 4. Replace the filter. 5. Install in the reverse order of removal. Replace the filter according to Scheduled Maintenance (page 8-3).
J94S.book Page 23 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance 1. Raise the wiper arm and turn the blade assembly to expose the plastic locking clip. Compress the clip and slide the assembly downward; then lift it off the arm. 3. Remove the metal stiffeners from the blade rubber and install them in new blades. Push Stiffeners Plastic locking clip CAUTION To prevent damage to the windshield, don’t let the wiper arm fall on it. 2.
J94S.book Page 24 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance 4. Carefully insert the new blade rubber. Then install the blade assembly in the reverse older of removal. Battery WARNING Tabs NOTE Install the blade so that the tabs are toward the bottom of the wiper arm. Battery-Related Lead Materials: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm.
J94S.book Page 25 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance ▼ Battery Maintenance Tires For reasons of proper performance, safety, and better fuel economy, always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution. WARNING To get the best service from a battery: • Keep it securely mounted. • Keep the top clean and dry.
J94S.book Page 26 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance ▼ Tire Inflation Pressure WARNING Incorrect Tire Inflation: Overinflation or underinflation of tires is dangerous. Adverse handling or unexpected tire failure could result in a serious accident. Always inflate the tires to the correct pressure (page 10-6). Inspect all tire pressures monthly (including the spare) when the tires are cold.
J94S.book Page 27 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance ▼ Tire Rotation To equalize tread wear, rotate the tires every 6,000 km (3,750 miles)/*12,000 km (7,500 miles) , or sooner if irregular wear develops. During rotation, inspect them for correct balance. * Canada ▼ Replacing a Tire WARNING Worn Tires: Driving with worn tires is dangerous. Reduced braking, steering, and traction could result in an accident. Always use tires that are in good condition.
J94S.book Page 28 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance ▼ Temporary Spare Tire ▼ Replacing a Wheel Inspect the temporary spare tire at least monthly to make sure it’s properly inflated and stored. The temporary spare tire is easier to handle because of its construction. It is lighter and smaller than a conventional tire and should be used only for an emergency and only for a short distance.
J94S.book Page 29 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Light Bulbs Interior light Headlights Courtesy lights Front-turn signal lights/Parking lights High-mount brake light Trunk light Reverse lights Rear-turn signal lights License plate lights Brake lights/Taillights 8-29 Form No.
J94S.book Page 30 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Your Mazda’s headlights have replaceable halogen bulbs. WARNING Handling Halogen Bulbs: When a halogen bulb breaks, it is dangerous. These bulbs contain pressurized gas. If one is broken, it will explode and serious injuries could be caused by the flying glass. If the glass portion is touched with bare hands, body oil could cause the bulb to overheat and explode when lit.
J94S.book Page 31 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance 5. Pull off the sealing cover. 6. Unhook the bulb retaining spring. Bulb retaining spring Sealing cover 7. Swing the retaining spring out and away to free the headlight bulb. 8. Carefully remove the headlight bulb from the socket by pulling it straight back. 9. Replace the bulb. 10.Install in the reverse order of removal. NOTE • When reinstalling the sealing cover, make sure faces up.
J94S.book Page 32 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance ▼ Replacing a Bulb (Front) Front-turn signal lights/Parking lights ▼ Replacing a Bulb (Interior) To replace the map light bulbs, contact an Authorized Mazda Dealer. Interior light 8-32 Form No.
J94S.book Page 33 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance ▼ Replacing a Bulb (Rear) Rear bulb access To replace the turn-signal light, brake light/taillight or reverse light bulb, pull the center section of the plastic retainer and remove the retainers and trunk end trim. 8-33 Form No.
J94S.book Page 34 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Rear-turn signal lights Trunk light License plate lights Brake lights/Taillights Reverse lights High-mount brake light 8-34 Form No.
J94S.book Page 35 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Fuses 4. Inspect it and replace if it’s blown. Your vehicle’s electrical system is protected by fuses. If any lights, accessories, or controls don’t work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will be melted. If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible.
J94S.book Page 36 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance If the headlights or other electrical components don’t work and the fuses in the cabin are OK, inspect the fuse block under the hood. If a fuse is blown, it must be replaced. Follow these steps: 1. Turn off the ignition switch and all other switches. 2. Remove the fuse block cover. When replacing the 100A fuse: 1. Turn off the ignition switch. 2. Remove the negative battery terminal. 3. Remove the A nuts. 4.
J94S.
J94S.book Page 38 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance DESCRIPTION FUSE RATING 13 (ABS) 20A 14 15 16 — — H/L-L — — 15A 17 H/L-R 15A 18 (ABS) 20A PROTECTED COMPONENT Antilock brake system — — Headlight (Left) Headlight (Right) Antilock brake system 8-38 Form No.
J94S.book Page 39 Saturday, June 23, 2001 1:04 PM Maintenance and Care Owner Maintenance Fuse panel (Driver’s side) 1 AUDIO FUSE RATING 15A 2 ROOM 15A 3 S.ROOF 15A 4 METER 10A DESCRIPTION 5 D.LOCK 30A 6 HAZARD 15A 7 A/B&ABS 10A 8 9 10 11 — A/C — TURN — 10A — 10A 12 WIPER 20A 13 14 P.
J94S.book Page 40 Saturday, June 23, 2001 1:04 PM Maintenance and Care Appearance Care How to Minimize Environmental Paint Damage The paintwork on your Mazda represents the latest technical developments in composition and methods of application. Environmental hazards, however, can harm the paint’s protective properties, if proper care is not taken. Here are some examples of possible damage, with tips on how to prevent them.
J94S.book Page 41 Saturday, June 23, 2001 1:04 PM Maintenance and Care Appearance Care ▼ Water Marks Occurrence Rain, fog, dew, and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicle and evaporates, the minerals will concentrate and harden to form white rings. The rings can damage your vehicle’s finish. Prevention It is necessary to wash and wax your vehicle to preserve its finish according to the instructions in this section.
J94S.book Page 42 Saturday, June 23, 2001 1:04 PM Maintenance and Care Appearance Care Exterior Care To minimize scratches on the vehicle’s paint finish: Follow all label and container directions when using a chemical cleaner or polish. Read all warnings and cautions. • Rinse off any dirt or other foreign matter using lukewarm or cold water before washing. ▼ Maintaining the Finish • Use plenty of lukewarm or cold water and a soft cloth when washing the vehicle. Do not use a nylon cloth.
J94S.book Page 43 Saturday, June 23, 2001 1:04 PM Maintenance and Care Appearance Care Insects, tar, tree sap, bird droppings, industrial fallout, and similar deposits can damage the finish if not removed immediately. When prompt washing with plain water is ineffective, use a mild soap made for use on vehicles. Thoroughly rinse off all soap with lukewarm or cold water. Don’t allow soap to dry on the finish. After washing the vehicle, dry it with a clean chamois to prevent water spots from forming.
J94S.book Page 44 Saturday, June 23, 2001 1:04 PM Maintenance and Care Appearance Care CAUTION Don’t use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may result in damage to the protective coating and cause discoloration or paint deterioration. ▼ Underbody Maintenance Road chemicals and salt used for ice and snow removal and solvents used for dust control may collect on the underbody.
J94S.book Page 45 Saturday, June 23, 2001 1:04 PM Maintenance and Care Appearance Care Interior Care ▼ Dashboard Precautions Prevent caustic solutions such as perfume and cosmetic oils from contacting the dashboard. They’ll damage and discolor it. If these solutions get on the dashboard, wipe them off immediately. ▼ Cleaning the Upholstery and Interior Trim Vinyl Remove dust and loose dirt from vinyl with a whisk broom or vacuum cleaner. Clean vinyl with a leather-and-vinyl cleaner.
J94S.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 9 Customer Information Important consumer information including warranties and add-on equipment. Customer Assistance ................................................................... 9Customer Assistance (U.S.A.) ................................................. 9Customer Assistance (Canada) ................................................ 9Customer Assistance (Puerto Rico) .........................................
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Customer Information Customer Assistance Customer Assistance (U.S.A.) Your complete and permanent satisfaction is our business. We are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Customer Information Customer Assistance Customer Assistance (Canada) ▼ Satisfaction Review Process Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In our experience, any questions, problems, or complaints regarding the operation of your Mazda or any other general service transactions are most effectively resolved by your dealer.
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM Customer Information Customer Assistance The Department, in cooperation with the local Mazda Service Representative, will review the case to determine if everything possible has been done to ensure your satisfaction. Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer’s service facilities, personnel and equipment.
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM Customer Information Customer Assistance Provincial Administrators may be reached locally as listed below: Province/Territory British Columbia & Yukon Territories Alberta & Northwest Territories Saskatchewan Manitoba Ontario Atlantic Canada Quebec CAMVAP Number (604) 681-0312 (403) 426-0650 (306) 352-9259 (204) 942-7166 (416) 596-8824 (902) 422-5413 (418) 649-1330 ▼ Regional Offices REGIONAL OFFICES MAZDA CANADA INC.
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM Customer Information Customer Assistance Customer Assistance (Puerto Rico) Your complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
09.FM Page 7 Monday, July 16, 2001 4:26 PM Customer Information Mazda Importer/Distributors Importer/Distributor Distributor in Each Area ▼ U.S.A. ▼ CANADA Mazda North American Operations 7755 Irvine Center Drive Irvine, CA 92618-2922 U.S.A. P.O. Box 19734 Irvine, CA 92623-9734 U.S.A. TEL: 1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A.) Mazda Canada Inc.
J94S.book Page 8 Saturday, June 23, 2001 1:04 PM Customer Information Warranty Warranties for Your Mazda • New Vehicle Limited Warranty • Distributor Major Component Limited Warranty (Canada only) • Safety Restraint System Limited Warranty • Anti-perforation Limited Warranty • Federal Emission Control Warranty (U.S.A. only) • Emission Defect Warranty • Emission Performance Warranty • California Emission Control Warranty (U.S.A.
J94S.book Page 9 Saturday, June 23, 2001 1:04 PM Customer Information Warranty Outside the United States and Canada Government regulations in the United States and Canada require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the United States, its territories, and Canada may differ from those sold in other countries.
J94S.book Page 10 Saturday, June 23, 2001 1:04 PM Customer Information Warranty Add-On Non-Genuine Parts and Accessories Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by the Mazda for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicle’s performance or safety system; the Mazda warranty doesn’t cover this.
J94S.book Page 11 Saturday, June 23, 2001 1:04 PM Customer Information Warranty Cell Phones WARNING Use of Cell Phones and Other Devices by Driver: Although not Mazda products, use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a number on a cell phone while driving also ties-up the driver's hands.
J94S.book Page 12 Saturday, June 23, 2001 1:04 PM Customer Information Uniform Tire Quality Grading System (UTQGS) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. National Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature performance.
J94S.book Page 13 Saturday, June 23, 2001 1:04 PM Customer Information Uniform Tire Quality Grading System (UTQGS) WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
J94S.book Page 14 Saturday, June 23, 2001 1:04 PM Customer Information Reporting Safety Defects Reporting Safety Defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor Corporation (Your Mazda Importer/Distributor).
J94S.book Page 15 Saturday, June 23, 2001 1:04 PM Customer Information Service Publications Service Publications Factory-authorized Mazda service publications are available for owners who wish to do some of their own maintenance and repair. When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below. If they don’t have what you need in stock, they can order it for you. PUBLICATION ORDER NUMBER 9999 95 019B 02 9999 95 021G 02 9999 95 017C 02 (U.S.A.
J94S.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 10 Specifications Technical information about your Mazda. Identification Numbers ............................................................. 10- 2 Vehicle Information Labels ................................................... 10- 2 Specifications ............................................................................. 10- 4 Specifications ........................................................................ 10- 4 10-1 Form No.
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Identification Numbers Vehicle Information Labels ▼ Chassis Number ▼ Vehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the left top side of the dashboard. This plate can easily be seen through the windshield. ▼ Vehicle Emission Control Information Label ▼ Motor Vehicle Safety Standard Label ▼ Tire Pressure Label 10-2 Form No.
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Identification Numbers ▼ Engine Number 2.0-liter engine 2.5-liter engine 10-3 Form No.
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM Specifications Specifications ▼ Engine Model Item Type Bore×Stroke Displacement Compression ratio 2.0-liter engine 2.5-liter engine DOHC-16V in-line, 4-cyl 83.0 × 92.0mm (3.27 × 3.62 in) 1,991 ml (1,991 cc , 121.5 cu in) 9.1 DOHC-24V V6 6-cyl 84.5 × 74.2mm (3.33 × 2.92 in) 2,496 ml (2,496 cc , 152.3 cu in) 9.5 2.0 liter engine 2.
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM Specifications ▼ Capacities (Approximate Quantities) Unit Item 2.0-liter engine Engine oil * 2.5-liter engine with oil filter replacement without oil filter replacement with oil filter replacement without oil filter replacement Coolant Transaxle oil Manual transaxle 2.0-liter engine Automatic transaxle 2.5-liter engine Fuel tank L US qt Imp qt 3.5 3.7 3.1 3.3 3.5 2.9 4.0 4.2 3.5 3.7 3.9 3.3 7.5 2.7 8.86 8.0 L 64.0 7.9 2.9 9.37 8.
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM Specifications ▼ Air Conditioner Gas complies with SAE J639 Maximum operating charge R-134a 0.75 kg (26.5 oz) ▼ Light Bulbs Light bulb Headlights Front turn signal/Parking lights Rear-turn signal lights Brake lights/Taillights High-mount brake lights Reverse lights License plate lights Trunk light Interior lights Map light Courtesy lights Wattage 60/55 27/8 27 27/7 27 18 5 5 10 5 5 ▼ Tires Standard tire Item Tire size Type 2.
J94S.book Page 1 Saturday, June 23, 2001 1:04 PM 11 Index 11-1 Form No.
J94S.book Page 2 Saturday, June 23, 2001 1:04 PM Index A B Accessory Socket ............................. 6-38 Add-On Non-Genuine Parts and Accessories ...................................... 9-10 Air Bag Systems .............................. 2-25 Air Filter .......................................... 8-21 Antenna ............................................ 6-11 Anti-Lock Brake System (ABS) ........ 5-6 Warning light .............................. 5-7 Appearance Care ..............................
J94S.book Page 3 Saturday, June 23, 2001 1:04 PM Index D F Driving Tips .......................................4-7 Automatic transaxle ..................5-12 Break-in period ...........................4-7 Driving in flooded area .............4-10 Hazardous driving .......................4-8 Money-saving suggestions ..........4-7 Rocking the vehicle ....................4-8 Trailer towing ...........................4-11 Winter driving .............................4-9 Flasher Hazard warning ...............
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM Index I M Ignition Keys ............................................ 3-2 Switch ......................................... 5-2 Illuminated Entry System ................ 6-37 Immobilizer System ......................... 3-17 In Case of Emergency ........................ 7-1 Indicator Lights ................................ 5-23 Cruise set .................................. 5-30 Headlight high-beam ................ 5-29 O/D OFF ...............................
J94S.book Page 5 Saturday, June 23, 2001 1:04 PM Index R S Rear Door Child Safety Lock ............3-5 Rear Seat ............................................2-6 Rear Window Defroster ...................5-35 Rear-Armrest Box ............................6-43 Rearview Mirror ...............................3-22 Recreational Towing ........................7-16 Rocking the Vehicle ...........................4-8 Storage Compartments .....................6-41 Storage Pocket ..................................
J94S.book Page 6 Saturday, June 23, 2001 1:04 PM Index T Trunk Release Handle ...................... 3-12 Turn and Lane-Change Signals ....... 5-33 V Vanity Mirrors ................................. 6-44 Vehicle Information Labels ............. 10-2 W Warning Lights ................................ 5-23 ABS .......................................... 5-28 Air bag system .......................... 5-28 Brake system ............................ 5-25 Charging system .......................
