Operation Manual

3 – 6
Before Driving
Keys
NOTE

The system can be set to unlock both
doors by performing a single operation.
Refer to Personalization Features on
page 9-9.
Use the following procedure to change
the setting.
1. Switch the ignition off and close
both of the doors and the trunk lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
UNLOCK button on the key for 5
seconds or longer. The sound of
the doors locking/unlocking can be
heard.
After this, the system switches the
setting each time the UNLOCK
button is pressed (the sound of the
doors locking/unlocking can be
heard).
4. The setting change is completed by
doing any one of the following:

Switching the ignition to ACC or
ON.

Closing the driver's door.

Opening the trunk lid.

Not operating the key for 10
seconds.

Pressing any button except the
UNLOCK button on the key.

Pressing a request switch.

(Auto re-lock function)
After unlocking with the key, both doors
and the fuel-ller lid will automatically
lock if any of the following operations
are not performed within about 60
seconds. If your vehicle has a theft-
deterrent system, the hazard warning
lights will ash for conrmation.
The time required for the doors to lock
automatically can be changed.
Refer to Personalization Features on
page 9-9.

A door or the trunk lid is opened.

The ignition is switched to any
position other than off.

(With theft-deterrent system)
When the doors are unlocked by
pressing the unlock button on the key
while the theft-deterrent system is
turned off, the hazard warning lights
will ash twice to indicate that the
system is turned off.
Trunk button
To open the trunk lid, press and hold the
trunk button until the trunk lid opens.
Panic button
If you witness from a distance someone
attempting to break into or damage your
vehicle, press and hold the panic button to
activate the vehicle's alarm.
MX-5_8EU4-EA-15D_Edition1.indb 6 2015/03/10 9:54:37