Operation Manual

Black plate (23,1)
Because your vehicle has free-style doors
(page 3-29), the rear door cannot be
opened while the front door is closed. To
exit the rear seating area, fold the front
seatback forward using the following
procedure and open the front door first.
Seatback folding
Press and hold the upper part of the
switch while the vehicle is parked safely
to slide the seat forward and fold the
seatback forward.
To return the seatback to its on-road
position
Press and hold the lower part of the switch
while the vehicle is parked safely to slide
the seat rearward and raise the seatback.
NOTE
The operation cancels in the following cases:
l
A seat adjustment switch other than a
lumbar support switch is operated.
l
The set button is operated.
l
Any programming button ― is
pressed.
l
The vehicle moves or starts to move.
The seat stops moving when it returns to
its on-roa d position. A beep sound is
heard at this time.
NOTE
l
Pressing and holding the lower part of the
switch again after the seat has returned to
its on-road position will move the seat
farther rearward.
l
Vehicle maintenance or other reasons
requiring the vehicle battery to be
disconnected will result in the seat position
memory being erased. As a result, the seat
will continue to slide rearward and the
seatback will lower rearward. Operate a
switch other than a lumbar support
adjustment switch to adjust the seat
position.
Essential Safety Equipment
Seats
2-11
RX-8_8BQ7-EA-10H_Edition1 Page23
Wednesday, July 14 2010 11:49 AM
Form No.8B
Q
7-EA-10H