Specifications

EXTERIOR TRIM
09-16–14
Operation
Open operation
1. After the deck panel is fully opened, the roof motor starts rotating based on the operation signal from the Power
retractable hardtop control module.
2. The roof motor link gear and the roof motor link start rotating due to the roof motor rotation, and at the same
time, the middle roof panel and the middle roof panel link rotate.
3. The front roof panel link and rear window glass link B rotate due to the middle roof panel link rotation.
4. Rear window glass link A rotates faster than the middle roof panel link at pivot fulcrum A, rear window glass link
A moves downward, and the rear window glass moves in the inner side of the middle roof panel
5. Due to the rotation of the roof link at pivot fulcrum B, the middle roof panel, rear window glass, and the front roof
panel move to the fully-open position.
6. When the roof motor link rotates to the fully-open position, A part of the roof motor link shown in the figure
presses the Power retractable hardtop open position switch stopping the roof motor rotation.
End Of Sie
FULLY CLOSE POSITION
DECK PANEL
A
A
FIGURE 1
FRONT ROOF
PANEL LINK
FRONT ROOF
PANEL
FRONT
ROOF
PANEL
MIDDLE ROOF
PANEL LINK
MIDDLE ROOF
PANEL LINK
MIDDLE ROOF PANEL
MIDDLE ROOF PANEL
ROOF LINK
ROOF MOTOR LINK
ROOF
MOTOR
LINK
ROOF
MOTOR
ROOF MOTOR
RINK GEAR
REAR WINDOW
GLASS LINK A
REAR WINDOW GLASS
REAR WINDOW GLASS
REAR WINDOW GLASS
REAR WINDOW
GLASS LINK B
MIDDLE ROOF
PANEL
MIDDLE ROOF
PANEL
FULLY CLOSE
POSITION
FULLY CLOSE
POSITION
FULLY CLOSE
POSITION
FULLY CLOSE POSITION
FULLY
OPEN
POSITION
FULLY OPEN
POSITION
POWER RETRACTABLE
HARDTOP
OPEN POSITION
SWITCH
POWER RETRACTABLE
HARDTOP
CLOSE POSITION
SWITCH
ROTATE FAST
FULCRUM A
FULCRUM B
amxuun0000005
3404-1U-05F(09-16).fm 14 ページ ２００６年７月３日 月曜日 午前９時５２分