Technical data

ENGLISH

Do not use the doser (grinder-doser version) to store foods or measure them.

THE COFFEE GRINDERS AND COFFEE GRINDER-DOSERS MANUFACTURED BY

OUR COMPANY ARE INTENDED FOR SKILLED PERSONNEL

ONLY FOR PRO-

FESSIONAL USE AND NOT FOR HOUSEHOLD USE

The user must be an adult. Do not allow children or incapable persons to use the appli-

ance.

7) INSTALLATION AND WIRING

The appliance must be installed by skilled technical personnel in conformity with the

safety rules in force. Incorrect installation may result in injury of persons or animals, or

damage to property, for which the manufacturer cannot be held responsible.

•

The appliance must be placed on a stable, flat surface.

•

Before plugging in the appliance, make sure the voltage and frequency values of the

supply mains correspond to the ratings indicated on the label featuring the appliance’s

technical data.

•

The wall socket must be fitted with an efficient earth contact. Consequently, it is

essential to make sure the earth system is efficient and in conformity with current

safety rules. If in any doubt, have the system thoroughly checked by personnel with

the appropriate professional skills.

IT IS COMPULSORY TO EARTH THE APPLIANCE.

The manufacturer cannot be held responsible in the event this regulation is not com-

plied with.

•

It is essential to make sure the ratings of the system are suitable for the power

absorbed by the appliance - as indicated on the label featuring the technical data -

and that the wall socket is protected against overcurrents.

•

Do not use extension cables, plug adapters for multiple sockets or makeshift con-

nections.

•

In EEC member countries, the regulation in force calls for the external equipotential

terminal on the outer part of the appliance’s base plate to be connected to a

equipotential node if the installation is to be correct.

•

THE HOPPER MUST BE FASTENED TO THE APPLIANCE’S GRINDING SYSTEM BY

MEANS OF THE RELEVANT SCREW which must be inserted in the threaded hole

located on the upper grinding blade holder and in the hole on the neck of the hopper.

8) OPERATION OF THE APPLIANCE

PRELIMINARIES

Make sure the hopper is positioned correctly on the appliance and is fastened to the

upper grinding blade holder by means of the relevant screw.